LENOVO B570 HDD will not identify, so it DOES not start.

Similar Questions

• Lenovo Ideapad z585, will not start?

  Hi, I have a problem with my laptop.
  So, I've had this laptop for a while, and it worked pretty well, until yesterday. I had closed the lid to put to sleep, like I always do and came back a few hours later to find frozen windows. As completely, any movement of the mouse, no indication that something is happening, frozen.

  So, I turn off by holding the power button down for a few seconds, wait a minute and turn it back on. To do this, its normal startup screen (Lenovo logo, with a circle of spinny points downwards), but for a lot longer than it normally does, and it then goes to a start menu.

  Now, I am dealing with this kind of thing before (recently in fact, on my main PC), and my first thought was the bios screwed up somehow. So, I'm going on the Lenovo site, for retrieval/update the BIOS is an exe file.

  To be run on the computer, inside Windows.

  What I intend to do, is what I did to fix my main PC a bit ago: make a USB stick to boot MS-DOS, throw the files of updating the BIOS out there and start from the key (which worked). But, I don't know if it will work with an EXE, and I do not know if this laptop starts from him.
  Moreover, I had just recently reinstalled a 8.1 clean Windows, and I'm almost certain that I do not have a virus, because I Win. Defender running (I know, I know), and this thing is almost no action except note at my college, and record the gameplay through a capture card.
  Yes, sorry for the wall of text here, but I could really use some help with this.
  Thank you!

  I was able to solve the problem.

  I removed the laptops HARD drive (don't worry, there is no guarantee to cancel in any case) and connected to my main PC, he wiped down, put it back in the laptop computer and reinstalled Windows. It seems to work a lot now.

• L775-11N satellite will not start

  Hello

  I bought a L775 almost a year ago, but today it has stopped booting. It freezes at the screen of the BIOS (Toshiba logo).
  No HDD LED activity, but all the others are fine.

  I think that the HARD drive is defective, as I traded with my portable Linux and it works.

  However, (a Seagate Momentus XT ST95005620AS) HARD drive works on another computer and even on Linux with the Toshiba (on an external HARD drive enclosure). He has some bad sectors (INTELLIGENT default), but it works as it should.

  I tried to clean the CMOS memory, wipe the HARD drive (using GParted), but nothing.

  Any ideas?

  I think it fails because of the CHIP, as the BIOS will not start on this HARD drive because of the errors, but I'm not sure. I tried to update the BIOS (I think that I've upgraded to 1.90 but there is a 2.0 release), but looks like it is a Windows software only.

  Thanks for your replies

  EDIT: I can boot the disk when it is inside a USB enclosure.

  Hello

  I don t think that this question is related to the failure of HARD drive.
  Even if the HARD drive is faulty, the laptop must pass the POST (power self test) properly but it doesn t it freezes to the Toshiba start screen and this means that the POST has not been passed

  I think you should check the RAM. A faulty RAM can cause this kind of problem
  Otherwise, it could be a serious problem with the motherboard.

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Sidebar.exe will not start

  Hello, Microsoft community.

  My problem is, sidebar.exe will not start. He does not appear in the Manager of tasks and does absolutely nothing when I run the executable file.

  I have a new laptop, just installed Windows 7 Ultimate 64 - bit on it. Now, here's what I just did after installing Windows:
  1 remove some windows components:

  -IE

  -Windows media center

  -Games

  -Tablet components

  2 installed all updates and drivers needed

  3 optimized for SSD Windows (I installed on the SSD and HDD extra for Windows files):
  -moved my user on an internal HARD drive folders
  -off hibernazation
  -a rejected the files on the system drive for the content index
  -Move page file of SSD to HDD

  -people with disabilities Prefetch and Readyboot

  To solve the problem, I tried (I rebooted after each operation):

  -running sfc/scannow (says it fixed a few errors, but eventually I saw no changes)

  turn the component Windows Gadgets

  -in the course of running sidebar.exe administrator

  -installation of hotfix (http://support.microsoft.com/kb/979164) - said that it is not compatible with my setup.

  I really hope that the information is more than enough and can someone help me solve the situation.

  Hello

  Glad to know that you were able to resolve the question and thank you for sharing the information with us. For more information on this update, see Microsoft KB article:

  The fix it solution described in this section is not designed to be a replacement for any security updates. We recommend that you always install the latest security updates. However, we offer this fix it solution as an option for workaround for some scenarios.

  MS13-038: Internet Explorer security update: May 14, 2013

  http://support.Microsoft.com/kb/2847204/en-us

  Thank you and best regards,

  John

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!

• Firefox will not start after update

  Firefox will not start today. I think he had an update yesterday.
  Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
  Renounce top almost ready

  Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

  Fix Firefox problems caused by malicious software

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  See if the Restrictions are enabled > usage on your iPhone Restrictions

  If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi

  Then try to download apps.

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.