Lenovo SL510 will not start.

Then I made a mistake. I reinstalled the operating system on the computers of dozens of times and never had this problem. I have Lenovo SL510 and tried to reinstall using the dvd player. I am entered bios and changed the boot for the reader settings dvd was first and then started but he went directly into windows 7 hard disk. I tried again, hit f12 at startup and specifically selected to boot from the DVD drive and again it would start directly from the hard drive ignoreing completely DVD player. Finally, I opened the DVD of windows and installed over the old operating system, intended to delete old files after installation is complete.

The installation went well, everything worked, except that I had no internet. It turns out that the wireless card was not recognized. I opened the Device Manager and it was showing under "Other devices" as a network with a yellow exclamation point controller. I go to track down and install wireless drivers after you connect with an ethernet cable. I tried the program of chipset intel and it not to install the appropriate driver, I tried lenovo support program and it is impossible to install the driver, I downloaded and installed the driver manually and nothing happened. I tried several different wireless drivers and the result was always the same. I was working on the issue for at least 8 hours.

Finally, I decided it wasn't worth it and why not reinstall again. This time, I have created a bootable USB key and went through the same process, boot order has changed, no result booted from the hard disk, you press f12, selected the USB, the same result. Finally, I installed the new OS image on the existing operating system from USB when the computer was on.

Install the OS on the older operating system was certainly a mistake, but it seems that the crux of the problem was that the computer just wouldn't start on anything else that the hard drive itself, I did not realize the implications that this presented, and during the final installation of the operating system of the USB, the computer restarts during the installation. Of course.. the computer does not reboot from USB which meant he came just a black screen, the operating system has already erased from the hard drive, but could not boot from USB and so simply rises blackscreen.

The first thing I tried to do has been reset in the BIOS, was not the case. When I try to access bios it would simply blackscreen with power on indefinitely. Of course I tried f12 Boot and using several times to try to move back from USB to DVD and so forth, but just black screened.

Then... Help? If the computer could not boot from USB or DVD then the only option was to start from inside the original OS, but this caused a driver error massive that I couldn't solve little matter what I did. And now, I think that the computer is completely lost. The only idea I have is to try to use a friends computer to install an OS on the drive the SL510 hard then resintall the hard drive in the laptop to see if it boots from it. I paid this entire Forum and found many similar problems, but no one seems to offer answers or solutions outside of a message 'we are looking inside' casual.

I tried this solution without effect. What I finally did to solve the problem, is to remove the hard drive from the laptop and insert the hard drive in the computer of a friend, once I did that the other computer booted from the USB drive very well and I managed to install the OS on the hard drive. After that I recovered the original hard drive to the laptop and booted from the hard disk and the computer was delivered very well

It seems that the main issue here is that for some reason lenovo laptops in this series are unable to start something else than the HDD for an unknown reason, perhaps it has to do with the bios update I've ever done. Anyway, problem solved, if anyone has the same problem, hope this work around works for you.

Tags: ThinkPad Notebooks

Similar Questions

  • Lenovo Y410P only loads "Lenovo" logo, will not start!

    Hi, my slightly more mobile years computer does not load. I've recently upgraded from Windows 8.1 for Windows 10 and since I did it I got errors "blue screens of death". There were a couple, but most of the time that it was a mistake to "watchdog" should happen instead of the usual Windows startup after being off for a while it would just come up with a message saying he was recovering from a mistake and then eventually he would load windows and everything would be fine.

    But no more. I just back from being gone for the weekend and the computer is no longer supported anything else than start of Lenovo logo.

    Any ideas on what could be the cause? My hard drive or ram is fried? Something I can do?

    (I tried pressing F2, Fn and all other key combinations I can think.) I search online to find answers and have not yet finding someone with the same problem. Other people seem to be at least able to get into the BIOS, but I can't do that, either.)

    Thanks in advance!

    I have experienced this odd circumstance myself. In may cases, the computer just randomly got stuck on the start screen for Lenovo without prior indication as to why this would happen.

    Whenever that happens, however, the solution is extremely simple. I simply unplug everything from the ports on my computer. USB ports, which is (and the SD card). Boots right up when switched on with empty ports and then you can plug everything back in. I guess the computer is confused what to start from? No idea, but do let us know if it works.

  • Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

    Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

    Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

  • G5 will not start. LED light on. Fans before working.

    Early 2005 G5. running 10.5.8.

    G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

    Sam

    Some of the fundamental things include the pram/clock battery replacement

    since they may be dead; then with a power failure, sometimes the Mac

    do not restart. Usual power management unit & reset NVRAM/PRAM are

    methods that sometimes also used as a troubleshooting measure.

    • Reset the Mac chip power management: (see SMU)

    http://www.thexlab.com/FAQs/resetpmchip.html

    • How to reset NVRAM-LANDAU on your Mac - Apple Support

    A hard reset can sometimes be used, where the power is disconnected

    the logic board and power removed from grill; Then push the Start button / stop.

    (But maybe not. Several PowerMac computers, I had, some people found this helpful)

    You may also remove and reposition cards and other items

    the inside of the case, to be sure they are connected properly. Be sure to not

    In short anything, due to the static load or residual power in the circuits.

    The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

    can help to put it on again. Also sometimes the power supply has some faulty fans,

    circuits or capacitors, so they can be troublesome to repair or replace.

    Good luck in this case!

  • Firefox will not start after update

    Firefox will not start today. I think he had an update yesterday.
    Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
    Renounce top almost ready

    Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

    Fix Firefox problems caused by malicious software

  • Carillon of boot loop - start 2011 MBP will not start.

    I have a start 2011 15 "MBPro8, 2

    Quad Core Intel Core i7

    2.30 GHz

    Boot ROM version: MBP81.88Z.0047.B2A.1506082204

    Intel HD Graphics 3000 VRAM:512 MB

    AMD Radeon HD 6750M VRAM:1 GB

    8 GB of RAM 1333 MHz DIMM0

    It will not start.  Trying to start the machine, it enters a loop-

    1. startup chime

    2. grey screen with Apple

    3. the small wheel starts to turn under the Apple

    4. the screen goes black

    ... and the cycle starts over.

    The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

    3. a progress bar is displayed but does not progress.

    I have reset the PRAM

    It will start up in target Mode, so I was able to recover data

    In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

    I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

    I can start in the Test of online material, which revealed no material problems

    I can boot in Verbose mode and it always happens in the same place

    Execution fsck_hfs (version 226.1.1 of hfs)

    BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

    ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

    Other thoughts?

    Check Google for this error, it seems to be common.

    Apparently the startup configuration file is corrupted. These 2 articles can be useful:

    http://www.Hackintosh.computer/?p=67

    https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

  • I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

    Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

    Thanks Jerri

    If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

    https://support.Apple.com/en-us/HT201462

    Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

    Ciao.

  • Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

    Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
    Tried running firefox.exe Pei but error message:

    XML parsing error: the undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line 18, column 1:
    "< dialog < =" "^ =" "p =" "> < / dialogue >

    Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

    Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

  • Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

    Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

    Sorted now

  • Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

    It would be helpful to post what the screen says.

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  • Why can't I download apps? It remains on "buffer" / operation circle and will not start download

    Why can't I download apps? It remains on "buffer" / operation circle and will not start download

    See if the Restrictions are enabled > usage on your iPhone Restrictions

    If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.

    Tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi

    Then try to download apps.

  • Recovery disk will not start on Satellite 1110

    I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

    So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

    I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

    Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

    Anyone here knows a remedy to this problem?

    (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

    I am in the United Kingdom, and is a UK machine if that makes a difference.

    Hello Micha

    Is this your ODD works properly with the operating system?

    I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

  • L50 - B satellite will not start when the battery is completely discharged

    Hello

    My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
    I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

    The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

    My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

    Thanks for responding... I hope well :-)

    Toshiba L50 - B
    Windows 8.1
    Any standard/original setting since I only acquired this laptop a month ago.

    The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

    Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
    Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

    So in the worst case, the laptop must be checked by authorized service provider.

  • L50-A-19N satellite will not start in the BIOS

    Hello

    I have a problem with my laptop.
    I have installed 8.1 and fedora 20 windows.

    I was in fedora, when I decided to restart Windows.
    Instead of grub, I saw message with the error and my notebook has stopped booting.

    I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

    It will not start any further.
    I decided to get my system, but when I press F2 or F12, nothing happens.
    I can't get into the BIOS!

    Please, help me to solve it.

    Somehow, this seems really strange
    I m wondering why you are unable to access the BIOS

    What you can try to do is, remove the laptop HARD drive and switch on and press F2.
    From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

    But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

    However, your comments would be greatly appreciated

  • IPOD will not start power over

    My ipod touch will not start after as I hold down the power button / stop for 10 seconds; other on my ipod touch for 10 seconds, at the same time & release button with no luck.

    Any other way to get the iPod touch to start or turn it on?   Who sets the ipod touch?  A centre of repair or store for ipod touch?   What are the costs of repair.

    Try the remaining shares of:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

Maybe you are looking for