Lenovo T61 unused ports

Similar Questions

• Lenovo T61 cannot turn on after short circuit

  Dear Sir/Madam

  I saw a low battery warning displayed on my lenovo t61, quickly, I plugged an ac cable while the power was on. As a result short circuit, no longer works.

  I tried the trick after pressing 10 times on the power switch. He worked, prompted me to bios settings. Once restarted in windows screen, the battery icon showed very low before he past.

  I can't charge my battery even, I used a newly purchased AC adapter. Using an ac adapter without battery inserted also fail to power on. Please help me.

  Hi bert958,

  Sounds like a motherboard, probably a dead fuse problem.

  But because the fuses are soldered, you will need a new motherboard unless you can fix it yourself.

  Vince.

• Please download a video on how to put a traditional HARD drive to SSD on lenovo t61

  can someone please upload a video showing how to change a traditional HDD to the SSD on lenovo t61, help appreciated thanks

  Hi ghattiya,

  Removing and replacing the HARD drive, assuming the same form factor, are shown in the Lenovo training videos.

  To get advice on how to clone the drive or do a clean install, I suggest to start by searching the forum.

• Low speed SSD on Lenovo T61

  I bought new SSDS OCZ Vertex2 120 GB for my laptop, but the speed of R/Wr is low - max 140 MB/s (support SSD up to 260 MB/s) & problems with the FirmWare update are performed.

  It is a Chipset problem?

  This is a BIOS problem.

  old BIOS:

  

  new hacked BIOS

  

  did you update the bios SATAII? in the contrary case, the laptop is limited to SATAI speed, that's why you see only the limit of 140 MB/s.

  If you did not upgrade, then you should try bios update of Middleton.

  http://Forum.NotebookReview.com/Lenovo-IBM/459591-T61-x61-SATA-II-1-5-GB-s-Cap-willing-pay-solution...

• Lenovo T61 - 7663-AY2 uninstall Vista SP1 to SP2 and now cannot restart

  Hello community,

  I did something wrong with my Lenovo computer.

  I tried to upgrade vista SP1 to SP2 in order to continue to receive updates from windows, but I failed to improve.

  I read on a forum that to go if you have some difficulties to move from SP1 to SP2, the best thing to do is to uninstall SP1, in order to re-install again and after the update to SP2 is easy.

  So I uninstalled Vista SP1: KB936330 from my laptop and now it cannot restart. I'm facing the famous! 0xc01a001d! registry error.

  I tried all content restoration factory (MS DOS, restoring from the last restore point), but it cannot restart.

  Is there a usual thing do in this case, before the start in the order, he returned with the factory setting?

  My warranty expired on September 21, 2010, and I bought my computer in France while I am in England now.

  Thanks a lot for your help.

  Mitch

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67853

  Here is the driver matrix which relates to your T61

• Lenovo y50 ethernet port?

  Hey everybody I recently got a new laptop computer y50 and I noticed that when I went to plug my ethernet cable standard, the port on the laptop is too small! Is there a special type of cable I need? He knows its a rj 45and the port seems smaller than the average laptop ethernet port! is there a cable that works for this laptop, but also able to connect it to my wall?

  alsoto367 wrote:

  Hey everybody I recently got a new laptop computer y50 and I noticed that when I went to plug my ethernet cable standard, the port on the laptop is too small! Is there a special type of cable I need? He knows its a rj 45and the port seems smaller than the average laptop ethernet port! is there a cable that works for this laptop, but also able to connect it to my wall?

  Its not too small. He holds a lock of spring included. What you are pushed down and then insert the rj45 cable and you should be good.

• Lenovo t61 no display, only if I connect an external monitor.

  I started using my lenovo with a second screen, but then after a few days the main screen of my laptop has stopped working, and I can use it only to the secondary monitor. If I put windows 'Add' screens and I close and open the laptop, for about 1 second I can see some images, but the resolution does not, the colors are a strange shade of blue, and there are horizontal lines on the screen. Then it goes black again.

  I assumed it was a GPU problem, maybe overheating? But then I thought well, the secondary monitor works, so maybe it's just a display problem.

  Any ideas on how to solve this problem? I've had this laptop second hand so I have no warranty, I want to rule out any software problem before buying new pieces or even a new laptop.

  Thank you!

  
  

• Installation of XP SP1 on a lenovo T61

  I can't make it work: Device Manager displays all important devices (ethernet controller network controller (wifi I presume), video controller) all suspended off the coast of the other devices node, with the yellow question marks and exclamation points.

  I copied all the packages that appear to be vaguely relevant to the downloads page, it seems that some of them do not kick, because my XP is SP1. Someone knows what to do to get get the XP SP1 will?

  TIA!

  Can't you manually download SP3 on the computer where you post here: -.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displa...

  Transfer to your average T61 as a USB key later.

• Fan of Lenovo T61

  T61 7665-d61

  My fan looks like I run a dvd on high performance what you recommend to do.
  I had no fan error or anything

  It happens especially when I'm playing games and it really comes

  I'll add to the post of my friend Lead_org telling you may have a bad fan if the noise is abnormal, or it could be your system just trying to cool down. If the sound is normal, but it is not something your opportunity at the hearing, it could indicate a problem with cooling system, the fins of cooling may be clogged or bad thermal contact between the heatsink and the cpu/gpu. With the age of these things, I strongly recommend you remove your radiator and completely clean it and replace the thermal paste on the CPU and the GPU with some Artic Silver #5. This has been run cooler then the plant spent at least 3-4 degrees C. While your there you can replace the fan motor if you want, you can buy them on ebay for around $12 shipped, or you can buy a complete set, the radiator and the fan, but there are different models of heat sinks, if you need to get the right pair.

• Lenovo T61 Ultrabay HD

  I housing ultrabay with an in there (SATA) hard drive and another drive hard ordinary how do these 2 drives hard = 1 partition ex

  hard drive 0 (100 GB) + hard disk 1 (80 GB) = 180 concerts how to have that all under 1 C: drive as a pose to c: and d:

  parmardilan wrote:

  I housing ultrabay with an in there (SATA) hard drive and another drive hard ordinary how do these 2 drives hard = 1 partition ex

  hard drive 0 (100 GB) + hard disk 1 (80 GB) = 180 concerts how to have that all under 1 C: drive as a pose to c: and d:

  Don't do it, it's a very bad idea, even if it were possible.

  The ultrabay is removable, so if you have removed half of your system partition would be unusable, more the main Bay uses the SATA standard, the ultrabay converts SATA PATA, so it is much slower. It is better to have your data stored on a separate partition from your operating system anyway, if you ' r OS always desperately crashed, you can reformat the partition without touching any of the data in partition 2, so it's really a good idea to make at least two partitions on your system disk.

  Even if you had a desktop computer with two identical drives, you need RAID to consider them as a single disc and then if a drive is dead, you would not be able to access the data on... and what is the advantage to have them on the same letter drive anyway?   none that I can think of.

• HDD for Lenovo T61 6458-6QG

  Hello! I have laptop T61 6458-6QG and you want to change the HARD drive to a 500 GB. What brand and type of drive to buy? What is the best right now for this laptop?

  Yes, you can use a SATA II drive.

  With stock BIOS it will transfer as well always to SATA I speeds (aka SATA 150).

  With a modded BIOS, you will be able to use all the features SATA II.

• With the upgrade to version 8.0.1, I can not more long scrolling with my touch pad or button (Lenovo T61). It was possible before the upgrade. How can I fix it?

  The touchpad and the 'red button' continue to work on other programs but just not Firefox.

  Try to change the pref on the subject ui.trackpoint_hack.enabled: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the pref.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Two questions about the Lenovo T61

  He doesn't have that thing of flashlight on top, in the dark, you can turn it on and see your keyboard. It also has a built-in microphone.

  
  

• Lenovo Enhanced USB Port Replicator - FRU 43R8811

  
  
  

• Satellite A200 - Sierra data card is not working properly because of the com port

  Hello

  I recently used a sierra on Satellite A200 computer laptop data card and devices Bluetooth is to share with the data card com port and lead to the client cannot find the data card.

  I tried the data card in lenovo t61 and another computer laptop manufacturer, all of them are working properly.
  The question seems to casue of the Satellite A200 laptop.

  Everyone meets it or advice please!

  Thanks in advance!

  Hello

  The data card Sierra uses the same ports com as the internal module of BT?
  Well, in this case, you have an opportunity:
  You can assign the different port com on the data card Sierra

  Check if this is possible in the Device Manager.

  On the other hand, you can try to install first the data card Sierra, then BT stack
  Perhaps it would be too much work