Letter lock problem Vista

Similar Questions

• HP Pavilion a6712f w / HP w2207h monitor. screensaver locks the Vista operating system. How to cancel a blocking?

  HP Pavilion a6712f w / HP w2207h monitor. Screensaver locks the Vista operating system. I have to cut the full powers to restart the computer. What's wrong? Checked with AVG. virus system. HP system checks OK.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Restart the PC.

  Kind regards

  DP - K

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• Is it possible to type a letter on Windows Vista, to be printed?

  Is it possible to type a letter on Windows Vista, to be printed?

  We play, 25 October 2012 21:36:20 + 0000, JeannotChenard wrote:

  Is it possible to type a letter on Windows Vista, to be printed?

  Sure. What version of Windows you are using few questions. You need a
  program of processing and most of them can operate under any
  version of Windows.

  The best-known word processor is Microsoft Word, which can
  be purchased either by itself or as part of Microsoft Office.

  My favorite is WordPerfect, which is less expensive than
  Word.

  You can also use one of the free, such as word processing programs
  LibreOffice (http://www.libreoffice.org/). It's supposed to be a clone of
  Microsoft Word, and although I don't use it personally, I hear him very
  good things about it from others.

  And another choice, I mention with reservations. WordPad comes
  with Windows. If your formatting etc needs are very modest,
  You can use it. But note that WordPad is really more a glorified
  as a real word processor text editor and has very few options.
  If you do a lot of processing in the future, you should
  you get a real word processor. I advise you to WordPerfect, if you
  are ready to buy one or LibreOffice if you want a free.

  Ken Blake, Microsoft MVP

• View Dreamweaver code letter spacing problem

  Hi all

  This morning when I started DreamWeaver I saw something change.

  As you can see in the image below in mode code, the letters spacing is became really larger than normal.

  In the image below, I made a piece of code with my dreamweaver upstairs and downstairs with one of my friends.

  When I try to change the font in the Preferences menu (Verdana, for example) seems to fix the problem but when I change again on new mail the problem come back.

  What can I do?

  For me, it's really frustrating to work with this problem and I do not understand why it bothers me so much,

  
  Thanks for the help guyes!

  Manual.

  
  

  I have never talk on a dash problem, but on a letter spacing problem I solved by applying a restoration of the system configuration.

  No one knows the reason for this problem?

• How to lock the Vista product key?

  My Vista product key has been stolen and I want to lock it, what can I do?

  I don't want to let him use that stole my key.

  > is stolen my vista product key and I want to lock it, what can I do?

  Why do you only have been stolen? In your case, you must contact Microsoft technical support and inform them. They it will block and can give you a new one. (maybe, they will give you)

• Drive letter designation problem.

  MS supports and myself work in seeing why I have Vista SP1 install problems.  I just (yesterday) to install a new copy of Vista on my HD with all the upgrades installed except for SP1 and SP2.  I intend to install so that I can get IE9.  Well, MS and I ran into a slight impasse and will pick up again tomorrow with a conference call.

  Question: After our troubleshooting session today, he helps command, I was looking at my computer drive designations.  It's as if someone just took the designation drive letters that I have for each of my 2 discs and only them mixed.  Data and files, etc follows the description that I entered previously fair years through a random drive letter and there is to it.  It seems I have lost no files or data, etc...  Only bad drive letters.  Did someone came across this problem from a bad drive designation letter?  I will address it tomorrow with Ms.  In the meantime, I would like to see if I can understand why SP1 does not load.

  Question: My C drive is correct regarding the description and the drive letter.  Can I be assured that if I managed to say loading SP1 and SP2 and finally IE9, C only would be affected.  I don't want to touch other players given their problem of letter of designation.

  Question: I recently downloaded WLM only against MS.  I noticed that the appearance of it is a little different from the WLM that comes as part of Windows Live Essentials package.  Everyone has noticed that, and what did you decide to use?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

• Problems Vista start up, please help out if you can

  I have a HP Pavilion dv4, vista 64 bit home
  It is only a month
  This problem came out not the case, I stop the machine from the menu start normally
  the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.

  Hello danielingalt89,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.

  Clean boot

  We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7 log on to your account.
  ---------------------------------------------------
  Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
  ---------------------------------------------------
  To restore your Normal startup:
  1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. in the general tab, click Normal startup.
  3. When prompted, click on restart.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to unlock the mouse that is locked in Vista

  I dropped my cell fone on the keyboard and hit a button that locked my mouse... I have a touch screen computer so that help, but I would like for my mouse works

  Try a system restore to a Date before the start of the problem.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot change drive letter external (Windows Vista)

  I connected an external hard drive to my laptop (3.5 "), but it can not display in Windows Explorer.
  I have Windows Vista installed on my laptop

  The external hard drive is recognized in disk management, appears in good health, but has no drive letter assigned.
  When I want to change the drive letter, this and every other option is grayed out, except the option 'Delete Partition '.

  All the world is facing this problem before?

  Thank you

  Nielke

  Hi Nielke,

  I'm sorry to know that you still have the problem.

  You can try plugging the external drive to another PC to see if the device works it.

  If it is detected on another PC, you will need to take backup of the data on the external hard drive and try to format the drive by following the steps mentioned above to the PC where it detects.

  After formatting the drive, check to see if it detects is to change the drive letter.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot assign a drive letter using the Vista Disk Manager.

  I read these latest solutions possible, but here's my problem.  I need to connect directly a 3.5 drive I pulled a SIN of hammer to my laptop running Windows Vista... because I need to recover a folder deleted this drive 3.5 with software that only works on the directly connected motors.  Software of network recovery might work, but it seems too expensive for just the recovery of this folder.  I connected the hard drive directly via the USB port.  The system tray sees the device, but the Explorer is and of disk management to assign a drive letter is greyed out.  Please help with assigning a drive letter.  There is only one user on the laptop which is also the administrator.  Thank you!

  In my view, that Hammer NAS units are based on Linux. Therefore, the drive is probably _not_ formatted with a filesystem Windows reads/writes. Making it very difficult to recover the folder removed since all things you could do to convert to NTFS, say, will also make little probable that you can recover deleted files. Eventually, you could use one of the Linux flavors running from a DVD, for example, Ubuntu and recover the file by using a Linux tool or set the drive on a Linux machine.

  Tom

• PROBLEM VISTA AND WIN 8 FILE SHARING

  I can access files from my computer vista laptop win 8

  I can access the public folder of win 8 of my vista machine

  I can't access homegroup win 8 files from my vista machines

  Help!

  Hello

  I am happy to know that the problem is resolved, let us know if you need help with Windows in the future.

  Thanks and greetings

  John

• Lenevo Z580 key lock problem

  I bought reliance Kolkata Z580 August 4. I am
  really very satisfied with my purchase even after the purchase of
  authorized dealer. We've checked the machine, the best way possible and
  a machine at home. At home when we started typing a single key
  'W' is completely forthcoming when you press the right side of the key. I went
  the shop of Reliance and show them the problem they redirect me to the
  Lenevo Service Center and they r saying that you have not checked
  properly at the time of the sale. I went to the Service centre and departure
  They said the 14th day of purchase, that it is not under
  warranty. You have to pay or appeal in Bangalore to approve the total amount
  replacement of keyboard. After a few words with the receptionist, engineer
  verified correctly and told me it is not broken. The key to the inner
  locking is faulty. They took my details with the snapshot of
  the key and told me if Bangalore will be approved them they will replace
  the full keyboard. My complaint is why should I pay Rs 43000 /-for a
  faulty laptop. I will not replace the keyboard. I want the total
  Replacement laptop. I won't take this defective product.

  I'm asking them to do what is necessary for the replacement of the defective product.

  Waiting for your prompt action and response.

  He was replaced by Lenevo without any chareges

• Screen locking problems model?

  I have a setup of reason as my lock screen for my phone and 2 out of the 3 times that I try unlock it, it does not work. I try to drag the ground, but he thinks that I lifted my finger and the lines are red, as when guess you the wrong pattern, and the lines can get crazy, the point shooting randomly on the lock screen, making very tempremental. When this happens I just click the lock button to close the display off, and then try again. Even after I do that, it still does not work and the lock screen will become crazy... Any help/tips? I can load a video if that helps...

  I have this problem with my phone in the morning. I think it is do to the fact that I have my AC make my really cold room. If I leave the room for a few minutes, that I have no problem. It only happens when it has been in a cold room.

• Screen lock problem

  I have a 64 GB iPhone and last week, I updated to iOS iOS 8.xx 9.1. After the update, my phone slow sometimes and the screen has not moved even I scrolled across. The problem is, when you locked your phone with touch support, screen, it should be showed black white screen and locked instantly, but with my phone, sometimes when I blocked my phone, it shows the black white screen and then the background appear for a while and then the locked phone. Could someone help with this problem? Is this a bug or something?

  Could just be a bad copy of the iOS software. Save it to iTunes or iCloud, plug it into iTunes, restore as a NEW and test again. If the problem is resolved, then restore your backup, if the question comes up, the iOS and the phone is very good, it's probably something corrupt in your backup. But most of the time, a restore will solve your problem