level 5 configuration see config running
I created a user at level 5 and a password to enable level 5.
I put priv level 5 exec show running-config
I also have the local game default from AAA.
When I login as activate level5 and enforce a sh I get 3 lines of config
The question fact face is due to the design of the IOS. We can lower levels of privilege of all the configuration and the exec mode commands.
However, the executed show only display orders that the current user is able to change the configuration. In other words, all orders equal to or less than the current user's privilege level.
The show run/write terminal command should not display orders above privilege level of the current user because of security considerations.
IOS privilege levels may not see complete race Configuration. Refer to this document.
HTH
"Please note useful posts.
Tags: Cisco Security
Similar Questions
-
HP dv6 7214tx: windows Setup could not configure windows to run on this hardware
Hello
I know it has been posted similar problems before, but I still can't get on my instalation.
I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".
My PC is: ENVY dv6 7214tx
3rd gener. Intel Core i7-3630qm
processor 2.4 GHz
1 TB HARD DRIVE
8192 MB DDR3 SDRAM
Blu - ray optical drive
Windows 8
NVIDIA GeForce graphics card
WLAN & Bluetooth
I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.
What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.
Do you have any suggestions please?
Thank you very much
.. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.
However, I let it install... I'll see
-
Windows Setup could not configure windows to run on a hardware on this computer
HP Pavilion Sleekbook 15-b023cl
I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?
Thank you
Hello:
I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.
The most common solution is to try to install the SATA driver.
Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.
First file listed is for 64-bit operating systems.
Use the Drive Options - Advanced method to install and then select the option load a driver.
If you check the box, only the compatible SATA driver is selected.
See if it works.
-
Windows Setup could not configure windows to run on this hardware
I am trying to install Win 7 on a HP Pavilion dv6-7012tx laptop. He brings Win 7 by default. I installed win8 once. Now I can't reinstall win7 on laptop in May. He tried to install Windows 7, but when the computer restarts and tries to complete the installation, I get the following error: "Windows Setup could not configure Windows to run on hardware of Cet_Ordinateur."
My laptop configuration:
By default the operating system: Win7
Processor: Intel 2nd generation Core i5
GPU: NVIDIA GeForce 630 M
Hard disk: 640 GB (SATA II)
RAM: 6 GB DDR3
Hello:
If you use an ordinary W7 installation DVD and use no recovery disc, the most common cause of this error is the lack of SATA drivers.
Download and extract these files on a usb flash drive. First file listed is for W7 64 bit.
Plug the flash drive into your laptop and start your installation of W7 DVD.
When you get to install it now click on that and click the option advanced player options.
Then choose load a driver. You should now see all the sata on your USB drivers.
You can check a box and it will include the compatible sata driver to install.
Proceed from there, and I hope that will install W7.
-
"Installation of Windows could not configure windows to run on a hardware on this computer."
I recently released and bought 4 hard to present itself as a raid 10 disks, now I use my motherboards onboard fakeraid an ihc10r. The cables are fine and when I try and install windows 7 (64 x pro) on each disk with raid and ahci disabled in the bios, windows installs fine. Now when I raid raid 10 disks windows install can see the drive and even then, I load the drivers just to be sure that iastor.sys etc. (I tried with and without) is the same every time after the first reboot, I get about 10 minutes and 2 minutes after the resolution of the screen is adjusted BOOM "installation of windows could not configure windows to run on a hardware on this computer."
First of all, then someone please help me get windows installed on my raid?
Second, microsoft, your error messages leave much to be desired, it does not yet add a message in the Setup error log.
EDIT: Forgot to add that I did a memtest and it happened, I also have the piece of garbage jmicron on my MB off the power. In addition, the facility produces when the SATA controller is in AHCI mode, BUT not in raid mode.
Seems to me that if the software/driver is not compatible Windows 7. Also if any of the readers have reminants of your installation for each individual unit, Windows 7 may not be able to deal with formatting during the installation process. Try to download CD bootable diagnostic of the manufacture in car and do two things.
(1) check each drive individually for issues.
(2) wipe the drive (WD can for example remove the first and last part of the training which completely removes the MBR and other reminants for the final result is the drive looks like you just removed from the box and plugged in for the first time.)
Never be afraid to ask. This forum has some of the best people in the world to help.
-
How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?
Sorry, there is no setting for what is built into Firefox.
https://addons.Mozilla.org/en-us/Firefox/addon/tab-utilities/
In the utilities tab > Options > links there is a preference to enable single window mode. -
TouchSmart 600: windows Setup could not configure windows to run on a hardware on this computer
I had a Touchsmart 600-1120 Windows 7, don't know if it's 32-bit or 64-bit. I had to replace the hard drive and I bought a Seagate st2000dx001-1ns164 model. After installing the new drive, I used the recovery disks, but when the pc reboots I get the following message: "windows could not setup configure windows to run on a hardware on this computer." Are there new drivers I need to install and if so, where can I find the?
Thank you.
I suspect that the reason for the 2 TB drive vs the 750 GB drive that was there. All of the recovery check the hardware on the PC which is used and rejects the hardware changes if it differs too. I don't know a way around this limitation. I suspect that a copy of Windows 7 retail install OK but then you have all the drivers, FOUND HERE.
Another way would be to get a new 750 GB drive to replace the original failed drive.
-
I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Help, please.
Hello
Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
(a) ensure that all laptops the same hardware, the same manufacturer and the same model.
(b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".Warning of the BIOS:BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
(c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS. -
I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers." I can't install an oem on a new hard drive version? This is the portable original in all other respects.
original title: new hard drive and vistaHello
strange that you can request that
HP computers have been known to not let you install Vista on a non HP bought replacement hard drive
There were a few posters with this problem here
If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)
You can change the hard drives, RAM, etc.
I presume that you boot from the Vista DVD
-
I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit. I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive. When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code. To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista. When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer." The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.
The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material. I even double checked that Vista is always enabled. Anyone out there have any ideas?
I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit. I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive. When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code. To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista. When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer." The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.
The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material. I even double checked that Vista is always enabled. Anyone out there have any ideas?
Hey
GMPete
some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.
I suggest tha contact you hp because it's their recovery process you use
at the below link HP support forums
link below is for direct hp support contact us
http://welcome.HP.com/country/us/en/contact_us.html
Walter, the time zone traveller
-
OS = Windows 7Computer = Gateway FX6840
Media = gateway recovery media
Hard drive is set to AHCI in BIOSI started meeting with S.M.A.R.T. errors.
I backed up my data.
I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.
I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"
Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.
I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .
Any help would be appreciated... Gateway is only interested to collect money. They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).
Thanks for the reply.
Fortunately, I solved the problem myself (after 19 hours of stress).
The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us
Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.
So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.
It worked.
So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.
Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org
Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).
Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)
Eastan - ITF
-
How can I activate Technicon in adobe elements first 13? I can see it running in the Manager of tasks as elementsautoanalyzer13.exe but didn't interrupt the process in the case where he assigned to the program. There must be a way inside the adobe program to turn off because I turned it on by clicking with the right button on an image in the editor of the first, and then when you are prompted, he said he would run in the background and I said okay, now I can't stop it! . It appears in earlier versions of first items under Edit-> Preferences-> media analysis you could uncheck it to turn it off. But there is only a media section and in this tab, there is no automatic Analyzer to be seen. Thanks in advance for any advice
Rebeccah
What computer operating system? You are in the first elements 13/13.1 editor preferences or in organizing elements 13/13.1 preferences?
Where are you looking for in organizing elements 13/13.1 that you do not see Edit Menu/preferences /-media analysis that you do not see the options of AutoAnalzyer.
Organizing elements 13/13.1 preferences...
Please point out where you find a command to run AutoAnalzyer in the background in 13/13.1. If I right click a file, I see AutoAnalzyer perform what seems to be a time run command automatic Analyzer of a file.
Please specify.
Thank you.
RTA
-
If so, how?
Thank you
Try the documentation for presentation of collection to
and the presentation of the security
-
Low configuration computer cannot run Labview real-time
Hi all
I'm a little confused when I run Labview in another computer. The application written by my laptop already worked well. Then I package it and installed on another computer.
The application can run in this computer as well, but the waveformchart (to display the data) could not keep time real (about 5-6 seconds of delay).
I tried to install the second computer, and he could run well as it did in my laptop
So, I don't know where the problem was. I guess the computer configuration affect the speed of acquisition? (Because the first computer I installed was version and has a configuration below)
(I used Arduino to get the data through processes with labview and analog pins)Please see and tell me what exactly is my problem?
A few tips:
-All operations that don't rely on the acquired data, their outside the while loop (for example some of the functions of filter design) because you probably don't have to do it once at the beginning
-The LIFA Toolbox is no longer supported and has been replaced for a long time by the LINX Toolbox - you can consider using the Toolbox current taken in charge
-Your loop at the top of the diagram does nothing - you take an array of 1000 points and index the elements in an array of 1000 points - so does not change the table - just straight through wire.
-You may want to consider using an architecture of producer/consumer - write data to files is slow and can be slow down your loop (especially on an old hard drive!), if you put the data to another loop, you can write to file without slowing down your data acquisition.
-
the computer is configured to automatically run programs at startup detected
I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...
When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to
do before.
and she said then in a pox: problems
the computer is configured to automatically start detectet and a yellow triangle with an exclamation point
could you please tell me how solve the problem... thank you so much manual
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Peformance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
Maybe you are looking for
-
Model of the Acer Aspire One AOD255 running Windows XP 32-bit
Greetings. I recently bought this primarily as a trigger of the road (screen larger than phones), it is used for games facebook, email and Skype. It has worked well for the past 6 months. But now it started up... goes to the Windows XP screen, go to
-
As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned. My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually b
-
do not remain engraved on dvd files
When I burn files to a dvd, it looks like it works, I can view the files and the files will remain on the dvd until I put the disc in one of my other computers, I have a lot of video on my records and would like to get on some discs, is unfortunate I
-
Definition of owner app information
As shown in the API, there's an OwnerInfo class. This class provides two functions, one of those who is called getOwnerInformation(). But is it possible to set owner information as well?
-
Ola bom muito Saber dia gostaria a configuration senha para o do meu for computer access hp laptop. ERRO fatal cod: 77406076