Library folders showing twice when adding multiple disks

Similar Questions

• That I found a bug in the API? : Adding multiple disks SOAP error

  I am able to add the drives linearly as below:

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [0]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [1]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [2]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  However, when I try to add all disks at the same time I get a SOAP fault

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > \@devSpecs);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  The error:

  SOAP fault:

  -----------

  Error string: cannot complete the operation because the file or the /vmfs/volumes/ba5e81fe-201a6c4e/paul-vm1/paul-vm1_0_3.vmdk file already exists

  Lack of details: FileAlreadyExistsPAULWORK > clear

  Is there anyone out there who knows what's going on?

  I did a dump as you said, and it was very helpful.  I needed to add the code below to make it work

  It turns out that I need a unique key for each disk that I add.  Thank you for your help

  my $disk = VirtualDisk-> new)

  controllerKey-online $devSpec-> device-> controllerKey,

  unitNumber-online $devSpec-> device-> unitNumber,

  key            => -1 *($i + 1),

  support-online $devSpec-> device-> storage

  capacityInKB-online $devSpec-> device-> capacityInKB,

  );

  $devSpec = VirtualDeviceConfigSpec-> () new

  operation-online $devSpec-> operation,

  fileOperation-online $devSpec-> fileOperation,

  device-online $disk,

  );

  Is there a better way to do that

• I have Outlook Express 6. When I want to fix anything, the attachment box appears in a size... with only 6-8 files/folders showing both. How to adjust the size of the box?

  I have Outlook Express 6. When I want to fix anything, the attachment box appears in a small... with only 6-8 files/folders showing both.  How to adjust the size of the box?  There is no minimize mazimize click or angle to slide.  It used to be adjustable, but no more.  Help?

  Like when you open a new message window and either click the button attach or insert | Attachment? I don't ever remember being resizable or a very large box. Change the display of list will give you a bit more, but that's all.

• How WMP 11 automatically copies the songs on record monitored when adding songs to the library?

  I mean, it's like the "copy files in the itunes folder media when adding to library" in itunes. its easier to have my songs scattered in HD

  Hi 70pride,

  Follow the steps in the article.

  Add items to the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-items-to-the-Windows-Media-Player-library

  The Windows Media Player library: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-library-frequently-asked-questions

• Firefox12 shows no warning when closing multiple tabs

  Although I check "warn me when closing multiple tabs", Firefox fails to notify me when I open them and close them anyway. I checked the Boolean parameters "topic: config ' and they are set to 'true '. How can this be repaired? This is a drawback of having no warning.

  browser.showQuitWarning

  browser.warnOnQuit

  browser.tabs.warnOnClose

  browser.tabs.warnOnQuit

  change all the above true about: config and check again, the last one (browser.tabs.warnOnQuit), you must create it with Ctrl-click > select new > Boolean > enter browser.tabs.warnOnQuit as the preference name > click OK
  > select true > click OK.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• These library folders OSX should I remove

  I followed the advice of Linc Davis adware removal < https://discussions.apple.com/message/30330670#30330670 > and other threads. More unwanted tabs ceased when a link open or slide show arrow is clicked.

  In 'Macintosh HD / Library' I also erased records 'mechanical' etc. which are emerged together, but they reappeared. I also noticed that some files in cluster earlier (before June 1, 2016) 'siccateUpd' etc. Screenshots including what is in those files is attached.

  Given the adware has stopped, these library folders pose no threat, and I have to remove them?

  This computer (not mine) is widely used on Facebook (flash) and last Flash is still installed, otherwise only sites Web legitimate get for example visited Style.com, the Business of Fashion (at work) - Although these sites still appear to use Flash.

  I can update to Yosemite (via booking at the local Apple Store) or directly go 10.11.5 and write off some old graphics software.

  I have to "clean install", or just install above 10.9.5 10.11 or 10.10 will take care of any installed malware and the folders that I have?

  

  

  Please post a screenshot of the LaunchDaemons folder, in the view of the list with the content sorted by modification date.

• Firefox isn't me WARNING when closing multiple tabs and it should be, and the ability to save tabs missing

  Hi all

  Not sure if it's something with Firefox 30, but this problem appears again.

  In fact, first when I was close the browser with multiple tabs open, it warned me with the little popup, but it wasn't the "do you want Firefox to save your tabs for the next time it starts? It was just the warning of closure which said "you are about x tabs. Are you sure that you want to continue? »

  So, who was recently #1 problem. I want the option to save and exit. But only in the last few days, it seems, is not even show this close attention now. With several tabs open, it closes just to the bottom of the browser. When opening Firefox again, tabs have been restored, at least it's a good thing, although weird.

  I wonder how come back asking to "Save and exit" or "Quit" or "Cancel" as before.

  In response to some requests for information as possible, here is some information that you may be asking, which I already checked:
  -as appropriate on: configuration settings are all set to true already, such as browser.tabs.warnOnClose and browser.showQuitWarning
  -in tools > Options, "warn me when closing multiple tabs" is checked, and "show my windows and tabs from last time" is selected for the start of Firefox. Nothing has changed!
  -safe mode does not solve the problem; Firefox closes always just if I quit or press the red X.
  -"Always use the private browsing mode" is unchecked.
  -I didn't run a program like CCleaner between sessions

  I have not changed anything, but this problem happening! I hope someone can help me to solve this problem and go back to the way it was, where accidentally close Firefox could be avoided and restore the previous session was possible.

  Thank you!

  Well well, with more tests and the help of my boyfriend, what I've learned, it's that tabs "Save and exit" dialogue prevails over the caveat to the closure of several tabs.

  With browser.showQuitWarning set to true, it will ask me to save and exit - but not if "show my windows and tabs from last time" is selected to start Firefox, who dismisses the prompt to save and leave (and close several tabs warning). It will save just for you to quit smoking.
  And had I disabled this browser.showQuitWarning manually or by selecting "do not ask next time" on the Sava and dialogue to quit smoking, then the warning for closing multiple tabs seems to try to close multiple tabs, since I warn the option in my settings of the tabs.

  It is one or the other, save and exit or warning to the closure of several tabs.
  It would be nice but if it was not a conflict between the fence several warning tabs and Firefox abandoning dialogue.

  So, I hope this can help someone else who may be confused or accidentally to change options and potentially be screwed on. After all, I can an injury self-inflicted in the settings.

• AUTOMATICALLY SHOW DOWNLOADS WHEN YOU ARE FINISHED

  I would like to first of all the computer automatically opens the downloads page, when they have finished downloading

  This extension closes Firefox, once that all downloads completed and maybe this isn't what you have in mind.

  What do you mean with "download page"?

  Do you mean the folder where you saved the file, or do you mean the Download Manager window in Firefox?

  The new download manager opens is no longer automatically once the completed downloads, but Firefox shows an animation and an arrow highlighted on the Navigation toolbar to warn you.

  • https://support.Mozilla.org/KB/downloads+window

  Firefox handles downloads in the downloads folder in the library (history > show history)

  • Downloads are treated as elements of history: compensation removes history included download the elements and vice verse.
  • When the downloads are in progress you see a download button animation on the toolbar for Navigation showing an estimate of the remaining time
  • The download button gets a green highlight all completed once download to make you aware that there are new downloads.
  • Suspend and resume are in the context menu of an item.

  You can view the new download manager in a tab by opening the topic: downloads page and consider opening this page in a separate window.

  You can set the browser.download.useToolkitUI pref Boolean true on the topic: config page to revisit the classic Download Manager and also all download settings reappear in "Options > general".

  • http://KB.mozillazine.org/about:config

• Had a recent fall and rebuild and don't get 'My recent Documents' show more when 'Start' is clicked.

  Original title: my recent Documents

  Had a recent fall and rebuild and don't get 'My recent Documents' show more when 'Start' is clicked.

  Floowed instructions in 'HELP' to customize, Advanced and list but do not work.

  Help please.

  Thank you

  Bill

  Hi Bill,

  ·         What version of Windows XP you are using?

  If you are using XP Professional, follow these steps.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.  http://support.Microsoft.com/kb/322756

  Step 1: Follow these steps:

  (a) click on Start and then run.

  (b) type gpedit.msc in the run box and press on enter.

  (c) in the Group Policy Editor, navigate to:

  User configuration > administrative templates > Start Menu and taskbar

  (d) double click on menu to delete Documents from the Start Menu.

  (e) select not configured.

  Step 2: Follow these steps:

  (a) click on Start then on Run.

  (b) type regedit.exe in the Run dialog box, and then press ENTER.

  (c) access: HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  (d) right-click NoRecentDocsMenu to select change.

  (e) change the value to 0.

  (f) access: HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  (g) right click NoRecentDocsMenu to select change.

  (h) change the value to 0.

  (i) leave the registry (Regedit.exe) editor.

• Nokia iTunes Library .itl is locked on a locked disk or you do not have permission for this file

  Nokia iTunes Library .itl is locked on a locked disk or you do not have permission for this file

  Hello

  When you get this error message?

  Follow the steps below and check if that helps.

  Method 1:Follow measures to take in charge of the case.

  1. open Windows Explorer and locate the file or folder you want to take charge.

  2 - Click on the file or folder, click Properties, and then click the Security tab.

  3. click on advanced and then click the owner tab.

  4. click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  5. (optional) to change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  Method 2: Follow the steps below and check if that helps.

  Change the permissions on the folder / my music/itunes (and all subfolders and files) so that it is not "read-only".
  Here's how:
  a. by doing a right click on the name of the iTunes folder, and then select Properties.
  b. you will see the read-only check box. Make sure it is disabled.

  Topic: iTunes Library.itl file is locked
  http://discussions.Apple.com/thread.jspa?threadID=2678797&TSTART=0

  Topic: iTunes Library.itl file is locked on a locked disk or no write permission
  http://discussions.Apple.com/thread.jspa?threadID=2051801

• RAM Preview doesn't start when simultaneous multiple images rendering enabled

  Hi all

  
  

  I have a problem with coating AE CC, with my new PC computer in 8.1 Windows pro 64 bit

  
  

  As the title says, my question is where Ram preview doesn't start when simultaneous multiple images rendering enabled. It starts really 8-30 seconds depending on the complexity of the project and the rendering is slower and jumps frames!

  12 cores with 2 GB of ram each.

  When I turn off the option of several images simultaneously made starts ok.

  but it's really very sad that I can't use this beast of a CPU to full potential. a new processor intel i7 5930 KB, 32 Ram DDR4 2.4 Ghz
  

  
  

  Advice and options would be very appreciated.

  
  

  Thank you

  Vonzar.
  

  
  

  
  

  
  

  
  

  Installation program:

  8.1 Windows Pro 64-bit

  CPU: Intel Core i7 5930 K 3.5 GHz Six Core Socket 2011 - 140W box 3

  GPU: nVidia GeForce GTX 970 4 GB DDR5 PCI - E

  RAM: 32GB DDR4 Non ECC CL16 2400 MHz Crucial Ballistix Sport

  Motherboard: Asrock x 99 extreme 6

  Using all 12 hearts ever sense. It is slow because the images I/O and disk cache kill all the bandwidth, and of course there may be effects and used features that simply don't work well with the MP.

  Mylenium

• 3.1.1 library deleted shows and not new machines

  Whenever I launch Fusion, he asks if I want to "helps to improve the fusion...". ». If I answer Yes or no, he will ask next time.  In addition, when it opened at the library, it shows two virtual machines that I previously deleted in the library and complains that the files are not. New virtual machines I created does not appear, so I have to file-> open... and go to the virtual computer each time.

  It seems that's not save the config or preferences or something at the exit. I tried following the instructions to completely remove and reinstall, but he is always picking up the old configuration from somewhere. This isn't a huge problem, but a disadvantage.

  Any help would be appreciated.

  Thank you

  Steve

  With VMware Fusion closed, I would delete the "/Users/$ the specified item was not found./Library/Preferences/com.vmware.fusion.plist ' file and then open VMware Fusion.  It will act like it is open for the first time and you can add your Virtual Machine (s) by drag-and-drop/them on the Virtual Machine library or go to file > open... road.  Then open and close VMware Fusion a few times and see in her she holds in your configuration.  Note that if you do not want to register, you need open and close of VMware Fusion at least 3 times to keep the guest.

• Start up problem when having multiple databases on the machine

  Start up problem when having multiple databases on the machine:
  
  I installed two databases.
  
  When I stop the database and try to start using
  
  Startup pfile ='... location... " ;
  
  I get ora-12514: TNS: listener is not currently know of service rquirest in connect descriptor
  
  When I try again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn't exist
  
  Stop and start gave no problems when I had a database. Why I get problems when I have two databases?
  
  I use: show the pfile parameter. SPFile; to make sure that I have the right parameter locations, the error should not be the location.
  
  I never installed two databases on a single machine, then perhaps that I make mistake of a first - timer.
  
  Anyone know how to get this working, i.e. start and stop DB without problems?
  
  The oracle 11 GR 2 on Windows 7 64 bit, everything works normally.
  
  Thank you
  Ayman
  
  Published by: aymanzone on June 15, 2011 09:27

  aymanzone wrote:
  My oracle_sid is set to the name of one of my databases

  echo % oracle_sid %

  shows me the name of my first database.

  Still does not.

  When I start the services of two databases by using Services, I can connect and run queries both the database.

  Published by: aymanzone on June 15, 2011 11:47

  First of all... the Oracle Service for the instance must be started for the DB that you try to connect or start.
  Next... from the command prompt:

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Now, if you want to start or connect to another DB, which is on the same server (again assuming that the Service is STARTED)...
  From the same command prompt or other session...

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Published by: Srikanth on June 16, 2011 12:27 AM

• Adding additional disk space to Perc 6 / i server R710

  I have currently 3 250 GB installation as a raid 5 (original configuration) disks on a server R710 with a Perc 6 / i controller.  I ordered 3 discs (same readers) that we are running out of disk space. There is a set up disk C: and D:.  Can someone point me to instructions for adding these additional disks for the raid existing (drive D) without having dataloss?

  Thank you

  Gary

  If you don't have that one 'disk' listed in disk management, then you have only a single VD configured, which is good.

  You must install OMSA to broaden your VD. You then insert your new drives, make sure that they show as ready under physical disks, then go to virtual disks and select Reconfigure to your RAID 5. Adding two drives in your RAID 5 will add about 500GB (bit math makes it a little less) to your current Windows 'disk '. After the reconfigure statement, you will have something similar to below. Then, assuming that you do not run 2003, you click on the D: drive and choose Extend to finish with the second photo: