Library of RSA for ExtendScript?

Similar Questions

• C error: ld: library not found for - introduction collect2: error: ld returned 1 exit status

  I'm trying to compile the "Hello World" code C base with gcc, but the following error message:

  LD: library not found for - introduction

  collect2: error: ld returned 1 exit status

  The code itself is nice, he ran into another computer with no problems.

  First gcc had manually, the problem, installed and then uninstalled and installed with homebrew and still have the problem. How can I fix?

  (Have the 5.1.0 version of gcc)

  Okay, so nobody has responded, but I found a solution. This is the version of gcc, apparently more recent versions have this bug, one that works and compiles the codes is the 4.9 version, in case it would be useful to someone.

• Why is my music library still looking for missing unknown album everyday now never stops

  Why is my music library still looking for missing unknown album everyday now never stops

  Hello

  ·         You did changes to the computer before the show?

  ·         What Media Player do you use to play music files?

  ·         What is the file type of the music files you want to play?

  If you are using Windows media player, I suggest you to re - index the WMP library by following the steps below and check it, if it helps:

  (a) output Windows Media Player.

  (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.
   
  Note: Windows Media Player automatically rebuilds the database

• 4.6 AIR 19 iOS Flex 9 ADT package fail: library not found for - ISystem.B

  Immediately after the upgrade to Xcode 7 and try to debug my Flex AIR project, it does not package for iOS. This occurs when you try to debug on the device (iPad 2 iOS 9). Attention of:

  
  

  ---------------------------------------

  Create iOS package

  ID: library not found for - ISystem.B

  ID: library not found for - Igcc_s.1

  Compilation failed during execution: Id64

  …

  ---------------------------------------

  The two Adobe Flex superimposed 4.6.0 with AIR 18.0.0.199 and Adobe Flex superimposed 4.6.0 with AIR 19.0.0.193 fail with the same error.

  In addition, debugging in the Simulator, we get another warning at startup:

  ---------------------------------------

  Launch of iOS app

  [MT] DVTAssertions: Warning in /Library/Caches/com.apple.xbs/Sources/DVTFrameworks/DVTFrameworks-8201/DVTFoundation/Plug InArchitecture/PlugInManager/DVTPlugInManager.m:257

  Details: Asked but can't find extension point with the identifier Xcode.DVTFoundation.DevicePlatformMapping

  Object:

  Method:-extensionPointWithIdentifier:

  Discussion: {number = 1, name = hand}

  Please fill a bug report at http://bugreport.Apple.com with this warning message, any useful information you can provide.

  ---------------------------------------

  
  

  The first defect is really the block. I can't usefully working on the project until this is addressed. No difficulty in suggestions welcomed, TIA.

  Please follow the following to workaround [Applicable only for MAC]

  1. download and install Xcode last version 7 (we tried on beta xcode7.2)

  2. create a symbolic link or copy of Xcode way ld: /Applications/Xcode-beta.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bi n/ld to /lib/aot/bin/ld64/ld64

  I hope it solves the problem.

• Library not found for - lstdc ++

  My application was running and building quite happily, but I wanted to use the IOS Simulator to take pictures of a few screen.  This used to work, now, since the upgrade to Yosemite, I get this error:

  Error occurred during the application of packaging:

  LD: library not found for - lstdc ++

  Compilation failed during execution: ld64

  How to fix? Anyone?

  Sue

  In fact he just had the path to the iPhone SDK Simulator stated incorrectly.  Fortunately, the laptop if it was right and was able to copy the path. Instead of stating: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs, it's just a Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs - all good now.

• Discover Setup RSA for Internet users is NOT only internal users

  Discover Setup RSA for Internet users is NOT only internal users

  Yes, that might work very well.   No, the software of RSA information would not be repeated between brokers.

• Where is it save to save a photo library? Requirements for the external hard drive

  Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

  It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

  By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

  But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

  Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

  If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

  To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

  I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

  Does anyone found a similar document for the Photos?

  Is it possible to store original files referenced on iCloud by car or in a box?

• After a search of the library of bookmark for some a bookmark (and believes it is research), how did you then say it's in the folder? There should be a column 'File' in the line of title like this, Tags, file name, location. Thank you.

  A search in bookmarks in the library should provide each bookmark folder and name, Tags and location.
  As it is now, a search (for example) for the string 'IESI', a company in the center of Texas garbage collection, actually concludes IESI. But what happens if you don't remember which folder you put the bookmark IESI? Ongoing research fails to provide information of record.

  See:

  • Show Parent Folder: https://addons.mozilla.org/firefox/addon/show-parent-folder/
  • Go Parent Folder: https://addons.mozilla.org/firefox/addon/go-parent-folder/

• How downloards songs in my library i-tunes for a sc map or by phone?

  How to download songs from my library i-tunes on an sd card or by phone

  Hello

  I suggest you to see link below and check if it helps.

  http://support.Apple.com/kb/ht1491

  http://support.Apple.com/kb/ht1535

  You can also view the resources specific to iTunes. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://www.Apple.com/support/iTunes/

  Hope this information is useful.

• Library of mathematics for matrices and quaternions.

  Hello

  I wonder which is the best mathematics lbrary to use with the native development kit (opengles1.1).

  I don't know where to start to code one myself and would probably too long to write a library whole math.

  He should be able to handle matrices and quaternions, so for example, I can rotate.

  His game development that is why I use the native SDK.

  Thank you

  Mike

  I haven't used this on the Playbook, but it's very portable, so it should work, but the Eigen library is good (http://eigen.tuxfamily.org).  It will support your needs of gamedev and more, and I think that it is much easier to use than other math libraries.

• Cod app and library can be for different platform versions?

  I am writing an application that must run on a wide range of versions of the device. Some of the application contains code depending on the version, but a little is independent of the version. Are there problems or special considerations for structuring an application as a main .cod file compiled for a specific platform version and a .cod of library which contains functions of "lowest common denominator" compiled for, say, 4.2.1?

  What you propose works OK for us.

  The library is developed in a different project and workspace, the "interface" between the use of the application and the library is the jar file, which is imported into dependent projects.  This means that the two become completely independent, and it is possible to exchange the library for a later version on the device, without changing the main cod.

  The biggest problem is multiple applications with the same shared library requiring different versions of this library.  This section of the shared library has been discussed widely in the DevCon, so I hope that Rim will contribute to this requirement in some way in the future.

• ASA public 8.4 + key RSA for the SSH user authentication

  I saw in another post and the configuration guide in the community of support this key public RSA authentication is in favor of the SSH sessions at 8.4 and after.  I tried this implementation on an ASA 8.4 and a 9.1 ASA and I get the same error on both.  I tried specifying SSH version 2 to see if that is the question, but I still get the error.  Y at - there a step I'm missing?

  Here is the result of the configuration commands:

  ciscoasa (config) #username test nopassword privilege 15

  attributes of test #username ciscoasa (config)

  ciscoasa(config-username) # ssh publickey authentication

  ^

  ERROR: % name host not valid

  The above links:

  https://supportforums.Cisco.com/thread/2150480

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/access_aaa.html#wp1053558

  http://www.Cisco.com/en/us/docs/security/ASA/asa91/configuration/General/aaa_servers.html#wp1176050

  Thank you!

  My version is 8.4 (4).

  Tried to do it on another vith asa 9.1 and no luck.

  Fact a little research, and it turns out that this feature was launched in 8.4 (4) and not available for later versions.

  So, probably, your 8.4 is meadow (4) output and it was not available at the time and in your 9.1 is not available either)))

  Here is the document:

  http://www.Cisco.com/en/us/docs/security/ASA/roadmap/asa_new_features.html

  Take a look at the table 10.

• Key RSA for EMV

  Hi all

  According to the EMV standard, we demand that two RSA keys.

  (1) issuing RSA keys (will use little 1408)

  (2) ICC of RSA keys (will use little 1152)

  Here is the private RSA keys of the transmitter, use to calculate the ICC public key certificate. An EMV card contain various tag as 8F, 90 (issuer public key certificate) 9F46 (ICC PUBLIC KEY CERTIFICATE) etc that use in SDA/DDA.

  In fact, I want to calculate these values all (using Java) and want to perform the operation of SDA/DDA by my own understanding.

  Here I have need clear RSA keys that I'll use the computation of tag as well as the operation of SDA/DDA.

  EMV also have DGI8201-8205 that contian a RSA private key of CCI in CRT format.

  Could any body tell me how can I get the RSA keys that can solve my purpose and can be used in the calculation of the EMV. Thanks in advance.

  Hi all

  I got the right answer to StackOverflow. You can check it out here. http://StackOverflow.com/questions/31831367/test-RSA-keys-for-EMV-card/31848282?NoRedirect=1#comment51634680_31848282

• Acrobat SDK vs PDF Library SDK (especially for the AcroForms)

  Hi all

  I would like to develop an application for reading and setting the value within the AcroForm and a setting AcroForm shaped. For this purpose, I would use some of the existing API methods. I have a few questions:

  1) what are the differences of the SDK Acrobat and PDF Library SDK kit? (see the Documentation of the SDK Acrobat DC)

  Among others: kit SDK Acrobat and PDF Library SDK use the same PDF Library API? Just a different subset of it? What licensing and the pricing? Is my application above suggested a Library Application called "PDF"? What Acrobat Forms API - it is part of the extended for plug-in API but is not part of the PDF Library API?

  (2) what steps can I for the formatting and setting/read the value of an AcroForm?

  Can I use the two SDKs for this? (it seems that Yes, see Adobe PDF Library SDK |) Adobe Developer Connection) what are the advantages/disadvantages? What API methods come from? (Acrobat Forms API?)

  Thanks for all the info on these points

  The PDFLibrary SDK is a subset of the Acrobat SDK kit that can be used without the need for Acrobat.  One of the things that is not present in the SDK of PDFLibrary is the API of Acrobat forms you mention.

• How keep the anchor in the Middle during the change of height and width for extendscript model?

  When I try to change my composition height and width using extendScript, it works but with anchor point at the upper left corner. How to maintain it in the Center?

  My code:

  COMP. Width = 4000;

  COMP. Height = 4000;

  result:

  

  expected:

  

  Thank you

  OK, here is therefore the function for resizing of the model code. I tested several times with anchor points are offset on layers and centered, even with layers that are not yet within the limits of the Model Viewer. I'm sure there will be some users who eventually find something that will break it, but for now it seems to work perfectly.

  app.beginUndoGroup("CompResize");
    var myComp = app.project.activeItem;
    resizeComp(myComp, 500, 500);
  app.endUndoGroup();
  /* TESTING ABOVE */
  
  function resizeComp(compObj, newWidth, newHeight){
    if(typeof newWidth == "number" && typeof newHeight == "number"){
    if(compObj instanceof CompItem){
    var locData, allLayers, allLayersLen, curLayer, clAP, clPos, xShift, yShift, oldCW, oldCH, clH, clW, xOff, yOff;
    pData = new Array();
    cWidth = newWidth;
    cHeight = newHeight;
    allLayers = compObj.layers;
    allLayersLen = allLayers.length;
    oldCW = compObj.width;
    oldCH = compObj.height;
    compObj.width = cWidth;
    compObj.height = cHeight;
    for(var i=1; i<=allLayersLen; i++){
    curLayer = allLayers[i];
    clW = curLayer.width;
    clH = curLayer.height;
    clPos = curLayer.transform.position.value;
    clAP = curLayer.transform.anchorPoint.value;
    xShift = (oldCW - cWidth)/2;
    yShift = (oldCH - cHeight)/2;
    curLayer.transform.position.setValue([clPos[0] - xShift, clPos[1] - yShift]);
    }
    }else{
    alert("Invalid argument(1):\nComp Object required.");
    }
    }else{
    alert("Invalid argument(2/3):\nInteger required for Width and Height.");
    }
  }