LifeCam Cinema: After installing LifeCam 3.0 (many files), no "Microsoft LifeCam" program appears in START / all programs. Looking for a "LifeCam help" on the C drive, no results
"New hardware found", and "your new hardware is ready to use" I don't know how
The minimum requirements are met. If by chance, anything to cause a problem, Setup wouldn't let you continue when you went first to install the software.
Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
How can I disable the Preview on my desktop icon, I have many files on my desktop, it's easier when all of the PDF files have the same icon instead of a preview icon. so, I immediately see who is PDF and DWG. at the moment they all look different because the icon shows a preview of the contents of the file.
Hi Khody,
To change your windows 7 application icon you can use following the procedure-
a. Right click on the desktop icon and then click Properties.
b. now Select the shortcut tab and see button below to change the icon. Click the button change icon now all the icons.
c. you can choose a of the icons that you want for the shortcut.I hope this helps.
-
Hello
I downloaded Flash Player 11 (latest) and installed.
Installation progress bar reaches end that seemed to fill.
But FlashPlayer does not appear under windows ' start > all programs.
There is no "FlashPlayer" folder under "Program files > Adobe" as well.
Anyone help?
What is missing or wrong on my installation?
Thank you
togayan
OK, now I understand: you need a Flash Player to play the local .swf files.
You can't do that with add-on browser, you will need the standalone Flash Player (projector) for this. You can download it from http://www.adobe.com/support/flashplayer/downloads.html
Note that downloading is the player, not an installer, so you'll need to make the association of file manually.
I suggest you place the player downloaded as well as other Flash files
on 32 - bit systems: C:\Windows\system32\Macromed\Flash
on 64 - bit systems: C:\Windows\syswow64\Macromed\Flash
-
BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
At the moment I have problems connection BlackBerry device and other devices via Btooth
messages 1: 'softwarfe device driver was not successfully installed ".
message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
In short, the list obtained messages:
1 device driver software was not compatible
2. incompatible software Bluetooth
3. the drivers are not installed: lists of codes (31) (28) (10)Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
I tried all the options you will find in google without success.I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.
Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I've been with paltalk.com 12 years earlier I had to refromat but I can't download paltalk he tells me there is a fault whaen I click run so he can download another box is to say send the whebn of problems, you click on a blue line, it is supposed to go to microsoft I think they deal with it, but I got no joy in 4 days grrrrrrr I disable my anti virus to see if there is a conflict that is killing it but not help there hope someone can put me right thanks bob Sanders
Hello
Did you try to download and save to your desktop, instead of running it > then install from your desktop?
And Paltalk has a Section of their Web site support:
http://www.Paltalk.com/support/
See you soon.
-
Looking for Admin settings and preferably the user to install new 8.3 Primavera
Hi all
This is my first foray in MOSC (unless I forgot a precedent... )
Our current P6 8.3 was born of several years of updates/upgrades since the time of P3. We found the opportunity to meet our preferences user and admin and it made us want to compare our user preference settings and current Admin what would a stock "out of the box" installation It is my understanding that industry in the Administrator's preferences is the only setting of Admin preference must be entered by an Admin after an upgrade or new installation, so that seems to say that all other parameters some determined in advance by default. The user guide tells me how to set all the preferences, but does not say what they would be if you did not specify your own settings.
I searched the Primavera ORACLE support stuff and found a user guide for an earlier version (6.something maybe?) that showed a few pictures of some of the tabs preferences screen, but the current version of the user guide only includes the steps to change the settings.
Suggestions?
Thank you
Doug Bunch
Well that this article was written as a solution to the different types of corruption in P6, the result will be 'default' for the user, the user preference settings you specify here
: Update userdata set user_data = null where Field_Name = "pm_settings" and user_id in (select user_id from user where user_name = '
'); How to remove Application Settings preferences user one user (Edit, user preferences), if the account has been corrupted in project management or Web Access (Doc ID 894279.1)
-
My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to. Now, I can not connect to the internet. He is looking for an IP address, and he also says that the RPC server is unavailable. Any ideas? Help
Hello
Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
a. Click Start, type services.msc and press to enter.
b. in the list of services, double-click Remote Procedure Call services.
c. change the startup type to automatic, and then click Start.
d. click ok to apply the changes.Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode
-
Hello?
Hello
Please check the help below document:
Quickly find your serial number
In the case of the volume license product, please visit: site Web of Adobe License | Serial numbers | Orders | Accounts
Kind regards
Sheena
-
I'm unable to watch videos on youtube or even see the image at this site http://www.adobe.com/software/flash/about/
All sites tell me that I have to upgrade to Adobe Flash Player which I did successfully several times, I uninstalled and reinstalled and rebooted tried plsu some other tips such as using software rendering for accelerated graphics, but still the same upgrade error can someone help here?
Hi again Jay,
Flash files that are in the SysWOW64 location, these files should be there, but more comprehensive information should be listed.
Could you post back the full info on the file Flash .ocx, .dll & the .exe? Otherwise, I don't know what version you have.
Also, go to tools, manage addons and look for Shockwave Flash Object. What version is it and turned on?
This is important because they consist of Flash Player. I didn't need any Setup log info, so please do not post that.
Thank you
eidnolb
-
Problems after installing updates in Windows 7
After you install the updates that have been downloaded automatically, I was commissioned to do a reboot. Yes, I did. Now I have all the icons on my desktop, just the words. Even on Windows Explorer and my computer seems to run slower. I tried to restore to an earlier date (yesterday), but he said that he did not. I use a laptop HP9420US with windows 7 Ultimate and office 2007.
Thank you for your help.
JoeUpdated - I reinstalled Windows 7 for the 7th time. Just look at thise MS Updates.
Arona,
Thank you for your suggestions.
I tried method 1 the first time I recognized that there was a problem. Nothing has changed.
I just tried method 2 with the same result. I have now many files with IconCache.db.old and
No new (rebuilt) IconCache.db.
I don't have the operation of the start menu. I clicked and nothing happens. I can right click
on it and see properties and open Windows Explorer. I have to use Ctrl Alt Del to
to stop.
I ran the program Malwarebytes' Anti-Malware and it found nothing.
Now my individual windows seem to be transparent at the edges.
I really want to re - install Windows 7 for the 7th time. MS downloads
He screwed up, and I'd like to return to a correct functioning.
Updated - I can't find any file IconCache.db now. What now?
Thank you for your help.
Joe -
Impossible to install the SoundMAX for Tecra M2 drivers after install own WXP
Hey,.
I need help, is the audio driver for tecra m2 laptop
+ soundMAX integrated digital audio + * Version: * + 5.12.1.5160 +
I recently wiped the computer with a clean installation of windows XP. All drivers seem to work fine after installation, except sound related. When I try to install the SoundMAX driver correct (I know it's okay, I have another computer laptop tecra m2 is exactly the same) the following error message is displayed right at the end of the installation.
+ "The driver does not exist! Restart your system and run this installer again. » +
When I reboot, the same thing. I installed the drivers from the chipset intel, rebooted and tried: same result.
When I go into Device Manager, all devices are taken into account except an unknown device, which is a yellow questionmark with a small exclamation mark on it. The device soundmax isn't here.
I also tried to reinstall windows and then the drivers with the sound result last, even.I would appreciate if someone can help me solve this problem. If you need data from the system and you know a program to obtain the data in the system, send me a link and I'll post the data.
See you soon,.
RobHello
Try please install all things following this order of installations:
Windows XP Pro SP1a Edition
Intel Q332179 mobile CPU driver
AggressiveC3
Intel Chipset Software Installation Utility
Toshiba Common modules
Display driver for nVIDIA GeForce FX go 5200 display driver
SoundMAX Integrated Digital Audio
Alps Pointing Device Driver
Toshiba dual pointing device utility
Driver modem
Intel Pro/100 VE Network Connection
Intel Pro/1000 MT Mobile connection
Wireless Lan driver
Wireless keyboard shortcut
Infrared driver
Windows SD host controller driver
SD memory boot utility
SD memory card format
Bluetooth stack
Fix for "Microsoft Bluetooth with Bluetooth" Q323183
TOSHIBA Hotkey for display devices
Toshiba display device change utility
Zoom utility
TOSHIBA Power Saver
Toshiba Mobile ext.
Toshiba Utilities
Toshiba console
Toshiba controls
TOSHIBA ConfigFree
Toshiba Audio effect
CD/DVD Drive Acoustic Silencer
DVD - RAM Driver Software can only be used with DVD-RAM support -
problems with sound after installing windows 7
My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.
The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?
Hello
A lot of Vista for Windows 7 drivers, so try the following.
Download the Audio driver from the link below and save it to your desktop.
FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation. If the driver installs successfully, restart the computer and check your audio files.
Kind regards
DP - K
-
Problem of HP Mini 110-355 after installing win xp
Hi every1!
hope someone could help me soon...
I have 110-3500 mini hp win 7 (bones included) I have a mini internet shop
I was able to install win xp (on USB) on my loptop since some of my necessary habit of the software work on win 7.
but the problems are.
(1) optical mouse usb does not work! He says: "cannot install, peripheral is dsabled" he keeps saying it, even after activation of the device said on Device Manager and the Device Manager, under HID class, there is an unknown device:
and: (2) my wifi and and bluetooth does not work (the two are also in the same switch)
I downloaded and installed any necessary drivers form net but only that both do not work.
hope to hear any response soon... thank you so mch...
Hello:
Please see if the chipset driver helps with this unknown device.
I don't know why your network cards do not work if you have the drivers installed for them.
Try the latest driver for network card for XP...
Try this driver package and the bluetooth software...
Paul
-
DVD problem after installing Win XP Service Pack 2
After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?
WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!
See...
Help: I got hacked. Now what should I do?
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bTip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029
NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).
Norton Removal Tool
FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exeMcAfee Consumer product removal tool
http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exeSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Good luck!
================
[1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello
After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
Then a window pops up saying "Startup Repair cannot repair this computer automatically.
The details of the problem say;
Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
Signature of the 04:65537 problem
Signature of the problem 05: unknown
Signature of the 06 problem: BadDisk
Signature of the 09 problem: unknown
Signature of the 10:1168 problemSystem Restore does nothing, and all the other tools of recovery. :(
Please help, it will be much apreciated :)
DOMIf you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates. MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
I have a router Extreme Apple with Version 7.6.4 I just got internet access high speed of Brighthouse using the router/modem Arris. The Arris router turned into bridge mode. BrightHouse says that they only IPv4. Can I disable IPv6 on my Airport Ext
-
I have updated and now I can't get on the internet
I finished the new update and now I can't get on the internet? How can I fix it?
-
HP Laser Jet 4200 parallel to USB problems
Just bought laptop with windows 7 Professional and cant get the printer to work. A computer programmer working on it for an hour to try different drivers without result. Should I upgrade now printers? Did you buy a new parallel to staples usb cable t
-
Hello I want to detect the current state of Wi - Fi, turn off the Wi - Fi network if it is active as the switch again. I want to do all these Java. Is it possible to do? Thank you.
-
Upgrade your desktop Inspiron 570
Hello I have an Inspiron 570 desktop computer and instead to buy a newer version, I want to just update some of the pieces. I want to do the following -replace broken USB 2.0 ports at the front with USB 3.0 ports -install an additional hard disk: SSD