LifeCam Cinema is not recognized at all

Similar Questions

• Webcam LifeCam Cinema is not in the LifeCam software, but works (in low def) with other programs.

  Just installed my LifeCam Cinema in the correct order (CD of the software first, then plug the webcam into a USB socket). The usual pop-ups in the status bar is displayed (new hardware found, the webcam is properly identified, "ready to use" and shows in Device Manager) and the installation tells me the installation of the drivers and software is made. Installation normally ends when I click done at the end, but never start step 3 (the camera configuration).
   
  The camera works (not in HD) in Windows Explorer, the last Live Messenger and Skype, but NOT in the LifeCam 3.0 program. "There is no camera connected to this computer," he says, and the only option I have is to click on the help icon. There is no other error message.
   
  I have tried to uninstall, reinstall with the LifeCam 3.0 package downloaded, restart, all the try again all other USB 2.0 ports, disconnect all other USB devices, but the LifeCam software will not find my camera. That way I don't get access to the advanced settings like the resolution and these stupid effects, I was eager to try :) :(

  I have .NET installed 3.5, but only Live Messenger than essentials package. Do I need anything else to make LifeCam 3.0 find my camera?

  In your case geojayhawk, I would be re - install the drivers for the LifeCam. For some reason, he must have a difficult time reading the driver INF file.

  Try the link above and let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some tags are not recognized at all (mp3/ogg, always full albums)

  Hello!

  I encountered a strange problem. My rocket recognizes not all my files tags. — about 1/3 of my songs appear as 'unknown' as 'unknown '. My question is, someone bumped into what whether similar? I tried searching this forum but can't find anything similar.

  It's a little weird, like:

  • They are always full albums that are not recognized (i.e. newer than a part of an album).
  • I have not found a common application for the albums, tags are not recognized;
  • Some of them are MP3 (id3v2.4 I presume), some are OGG,.
  • some (most) is torn apart by myself CD, some are not.
  • I have them checked (of course) on the computer and all my software recognizes the tags.

  For example, 4 8 Weather Report albums are "unknown" - and one of them is OGG, MP3 3 and 4 which ARE recognized, 3 are OGG and 1 is MP3. I have my albums organized in the manner of MUSIC/artist/Album folders / *. [mp3/ogg] on the "rocket".

  All have been (re) marked with easytag, in fact, that I have recently relabelled/checked the tags of my entire collection with easytag (to ensure that it is usable on the "rocket"). There must be something wrong with my tags. I tried to format the device (in the menu), reset the database by deleting the device, but it does not... help on the updating of the database that is the same files that do not have recognized, however.

  Any suggestions or ideas?

  Thanks for your help!

  Hi again!

  And, thanks to the advice of sansafix, this problem is now solved!

  It seems that id3v2.4 was the culprit - my files under 2.3 relabeling them does the job. In addition, my OGG files were (and still are) the ID3 tag, unlike what I thought. But now they are 2.3 work also.

  Don't know why some of the tags did work, however, even though they were all 2.4 - but their relabelling as 2.3 made it all work in any case. Also, in easytag, I can't seem to be able to prevent OGG files of the ID3 tag, I can only it stop him marking with ID3 alltogether (which is not nice, because I have MP3 and OGG). There is an option to avoid tagging FLAC with ID, however. Maybe I should post a feature request for the guys of easytag, this should be easy to implement...

  I have my tags to format UTF-16 also and did not encounter any problems (yet - my rocket is still so new I don't have time to see all the songs with characters & foreign languages).

  But, in any case, thanks again! Very useful forum, it is indeed.

• USB device not recognized - F2180 all-in-One

  Hello

  I'm having a hard time getting anything out of my F2180 all-in-One printer.

  It worked well for awhile, but now I get a message from Windows Vista saying that the USB device is not recognized and the State showing as disconnected. I tried a number of things that resulted in no results:

  1 installed Driver Detective and updated all my drivers.

  2 disconnected the printer from the mains and the USB cable from the computer. Connected, rebooted and still nothing.

  3 entretienavec the computer on the network. Trendy, rebooted and still not recognized.

  4. run the Diagnostics of the HP. Watch there are connection issues and documents stuck in print, but not able to set.

  I had a glance on the forum to see if others have similar problems, and although some have, no solution seems to come. Don't know what to do now. If anyone can offer help, it would be most appreciated.

  Thank you.

  Just a suggestion, try to change the usb cable...

  or connect any other USB flash drive device and check if it still not encourage recognize...

  some cases, maybe it would chipset issues on your computer if it does the same thing with your other USB devices except the keyboard and mouse.

• my cd is not recognized at all. I get no message of the sytem when I insert the cd in the drive

  My Cd is not recognized by the system.  I don't get any message of Windows7, asking me what I want to do.  I ' v tried to burn music to a cd in my Media Player, but the cd is just sitting there and nothing happens.  The last time that I used it with success was on 04/07/12.  When I went to burn a document on a cd a few days ago, I discovered the problem.  May we make a suggestion (in plain English, please).  I am new to all this and I don't understand all the technical terms.

  Thank you

  CD are not recognized

  This is the fourth time I've asked this question without result.  I am trying to burn a document on disk, but the system will not recognize the cd in the drive.  I tried troubleshooting offered through Windows, I've linked the diagnoses by HP and I have tried several different physical disks.  Yesterday I finally got a message through the Windows troubleshooting and diagnosis saying the disc is unreadable.  I tried two packets together new Maxell disks and I have a problem, believing that they are all bad.  Can someone help me, in English please. I; m not much of a technical person and do not include all the terms.
   
  Thank you

  Hi William,.

  What is the brand and model of your computer?

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: Run the following Microsoft Fix it

  Your CD or DVD drive cannot read or write media:
  

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  

  Method 3: Refer to the suggestions from this link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps!

• Not recognized, yet all the numbers!

  My printer HP Photosmart C4400 all-in-One Series, model HP Photosmart C4480 has a number more than talking about the page How To and the video.

  Yes, the printer is actually in production (2008?) but I've only used out-of-the-box for 4 months in 2012 and then he is back in stock.  I just he carried out of the box, about a year later and of course had to install new ink.

  I wanted to check the printer was recorded (it is) and see if there are new driver updates, etc..

  and try to find out if it is to be on the noisy side is correct.

  I also need to know why, when I choose 'Set up', I got a window saying my device is not recognized, even if it is here, in the computer.  I can see it in the dock (MacBook Pro).  I wanted to do once more the printer by default - I had been driving on a friends through his cannon.

  Sticker on the bottom of the printer, left of the connecting cable has a number of "CN946M"... "more the barcode and the words"product of China ". On the right side of this vignette even longer numbers, which reads Q8383-6... [32].
  Then, on the bottom, to the front there is ANOTHER sticker that, aside from logos miners, gives the "regulatory model number", read "SNPRB-00"... ' and another number, the number of the product warranty, also begins with Q838, BUT this is different: "Q8388A.  NOTE: the other number (above) read 8383
  Above this vignette is a barcode with "Q8388 6"... "Still has another, different number and the words"Product of Singapore"
  On my 'Start Here' literature, there is a barcode at the bottom right that reads in part Q8383-9...

  then, friends of HP, which number is which?  And this a C-4400 or a C4480 printer?  And given that the warranty has expired for a long time even if its use is only 6 months old and the fact that I'm not "with it" with all the techno jargon (I had to seek that meant :-) OCR I would also like to know where to go (the lists are so long) for easy to request assistance.

  Thank you!!!

  Hi Cloudrowdy,

  I know by looking at the stickers on the printer can sometimes feel like watch the alphabet soup.

  Your product number is Q8388A, the printer is the all-in-one HP Photosmart C4480. The c4480 belongs to the serious c4400, I call the c4400 family and thinking about the c4480 as a cousin.

  The prescribed number is just a number of marketing necessary to make you worry about. The only other number may never need to is the serial number. Because the printer was made in China, the serial number will begin with CN and you should never the first 10 digits. I say this because it can be 14 digits in the serial number. Once again, alphabet soup! For security, I do not recommend that you never post your serial number on a public forum.

  Here is a link to HP Photosmart C4480 all-in-one printer support.

  This link will give you information for:

  • Drivers
  • Solve a problem
  • Getting started
  • How
  • Product information
  • User guides

  I hope it's useful. If there is nothing else or anything more specific, you want to help do not hesitate to inform MB.

• LifeCam hd-3000 not recognized

  When it is first installed yesterday it worked, after I downloaded driver from the Web site, now my computer does not recognize it's there, tried to unplug and plug back, uninstalling and reinstalling but no joy

  Hello

  1. you get any error message?

  2. other USB devices work properly?

  3 have you tried to connect the device to other USB ports?

  4. did you try to connect to any other computer and check if it works well?

  Please follow the steps mentioned below.

  Method 1:

  Run the fixit from Microsoft mentioned in the link below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the steps mentioned in the link below.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Method 3:

  Follow the steps mentioned in the link below.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• Scan to computer. Computer is not recognized Officejet6500APlus all-in-one

  Previously, when starting a scan session I hit on my desktop printer icon, click on 'functions of the scanner', then click on "connect the scanner to the computer. He worked all the time.  However, I just had to replace the printhead and now I see no way to connect the scanner to the computer when the icon is selected.  In fact, nothing about the function scan at all.  The printer display indicates that no computer is detected.   I checked in the manual of the user without success.  The printer is connected wireless and I was able to print documents from the computer.  My operating system is Windows 7.  Any help out there?

  Hi DianeNP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you encounter some problems when trying to scan to your computer.  To see if the HP scanning option is available, click Start and then go to all programs, and then click the yellow folder HP. In the HP folder, you should see your printer quoted as well as a scanner HP.  Try to scan from here.  If it solves your problem, you can place a shortcut on your desktop by analysis of HP right click and select Create shortcut on the desktop

  If this does NOT resolve your problem, please do not hesitate to write back and I'll be happy to help you.

  Thank you.

• WRT610N + Drobo USB storage link not recognized at all?

  I recently updated the firmware on my 610N to things that came out in January because I saw that they have improved the UPnP support (I expect codecs etc.). I had tried my Drobo on storage link when I got the router last fall. OK acknowledged, he did not support Divx or many other codecs I want to broadcast from it. I had not really tried in a long time. After you Flash the firmware, I tried a 200 GB Western Digital and it worked very well. Streaming Divx without problem. Then I "ejected" which and hung the Drobo. No joy. He does not or something, because I have not the button 'create the share. Is this a known issue? Is there any other configuration I need to do? This is a Gen 1 drobo via a USB port. Thank you.

  
  

• 4GB SD card not recognized

  Hello

  I ordered the Intex Cloud FX phone which is only available in India powered Firefox smartphone.
  I inserted a micro SD 8 GB card which works perfectly on other phones, but not on the Intex Cloud FX phone.

  The memory card is not recognized at all. Here are the specs:
  Phone:
  Brand - Intex
  FX Cloud - model
  Made in people's Republic of CHINA

  Memory card:
  Brand - SanDisk
  Capacity - 4GB
  Speed class - 2
  Another - large capacity (GC)

  Please suggest a solution.

  What file system is formatted SD card in?

• SD not recognized on the Satellite A100-787

  Although the card slot recognizes the memory stick from Sony, the SD card is not recognized at all. I tried the card on the other computer and it worked fine. The driver for the card slot works well.

  Any ideas?

  Sorry, but it is not easy to tell what can be the problem. What is the capacity of this SD card? You have produced high quality or some unknown manufacturer SD card?

  If possible, try to get the second SD card and test how it works with your laptop Satellite A100.

• 1.5 TB external DRIVE not recognized on various laptops disk

  Hello

  I was wondering if someone could help me.

  I bought my 1.5 terrabyte toshiba external hard drive just for more than a year. It works fine on my other computer, laptop and cell phone from my boyfriend, but when I joined four other new laptops (all different brands) recently it was not recognized at all on these laptops.

  Is there something wrong with my outside or something on these computers it prevents to be recognized? Do you know how I can fix this problem?

  Thank you very much!

  Hello

  And if you connect the external HARD drive to your boyfriend s computer laptop, everything is always ok? Only problems with new laptops?

  Well that s really strange have you tried another USB cable and different USB ports?

  Maybe on the new laptops the antivirus or firewall blocks access to the external hard drive. Check your security software and to allow external devices.

• Re: Qosmio x 770-107 - recovery disk not recognized

  I gave up my old 3 months Qosmio x 770-107 last week and killed my HARD drive. A new HARD disk, exact replacement to order it. Ordered a DVD of recovery of this backup media site that is posted here. I entered number etc.

  Rolled up today but at the start it is not recognize at all. He sees my drive in the BIOS, and I changed the startup as well as preferences to try waiting usual f12 or whatever.

  All I get is:
  "Reboot and select proper boot device."
  Or insert boot media in selected boot device and press a key. »

  It doesn't matter what I do.

  I tried another windows 7 boot cd and it started to load files perfectly. It's infuriating after 8 days of waiting, I thought I was back in business.

  Any help?

  Thank you

  Chelm.

  Post edited by: chelmdog

  > I tried another windows 7 boot cd and it started to load files perfectly.

  This means that you can install Win7 using the original installation disc from Microsoft but Toshiba recovery disc is not recognized at all?

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.