WRT610N + Drobo USB storage link not recognized at all?

Similar Questions

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• The mistake that the USB device is not recognized... Help, please...

  I am trying to connect to Simple external storage drive and once I followed all the steps (only 2) Windows XP gave me a message that the USB device is not recognized or it malfunctioned. I disconnected everything and tried again in another USB port and still had the same error. I know that is not the usb port of my computer because I have it plugged into a port that just worked. I have Windowx XP SP2. Any help on this would be appreciated.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• mass storage device not recognized

  my computer does not recognize a storage device. How can I solve the problem.

  I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.

• K135 move v0.35 on v0.37 is not possible because USB or MicroSD not recognized

  My problem is described in the topic:

  K135 move v0.35 on v0.37 is not possible because USB or MicroSD not recognized?

  I read the instructions in the PDF and the user manual.

  Can someone help me?

  I solved my problem, I change the k135 by another k135, mass memory connectors are damaged.

• USB device not recognized - F2180 all-in-One

  Hello

  I'm having a hard time getting anything out of my F2180 all-in-One printer.

  It worked well for awhile, but now I get a message from Windows Vista saying that the USB device is not recognized and the State showing as disconnected. I tried a number of things that resulted in no results:

  1 installed Driver Detective and updated all my drivers.

  2 disconnected the printer from the mains and the USB cable from the computer. Connected, rebooted and still nothing.

  3 entretienavec the computer on the network. Trendy, rebooted and still not recognized.

  4. run the Diagnostics of the HP. Watch there are connection issues and documents stuck in print, but not able to set.

  I had a glance on the forum to see if others have similar problems, and although some have, no solution seems to come. Don't know what to do now. If anyone can offer help, it would be most appreciated.

  Thank you.

  Just a suggestion, try to change the usb cable...

  or connect any other USB flash drive device and check if it still not encourage recognize...

  some cases, maybe it would chipset issues on your computer if it does the same thing with your other USB devices except the keyboard and mouse.

• WD My Passport Essential 500 GB USB 3.0 - not recognized on XP family 32-bit PC

  Desktop desktop PC computers, vista 64-bit bus + XP Pro 32 bit, both recognized as the USB HD Western Digital has tried everything they can and notify refers to Microsoft. Help, please!

  Hi maryeo1,

  • When was the last time that the external drive is recognized by the computer?
  • Did you the latest changes on the computer?
  • What happens when you connect the external hard drive to the computer?
  • You are able to access the other USB devices on the computer?

  Method 1

  See the Microsoft article below and run the fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2

  If the above step failure then check out the link below and try the steps mentioned, check if it helps.

  External drive WD, a drive letter is not assigned by Windows or Mac OS x and the data on the disk are inaccessible

  Hi, Halima, tried the two 1 + 2 method. No joy.  To answer your questions:

  • When was the last time that the external drive is recognized by the computer?  Not recognized for the first time.
  • Did you the latest changes on the computer? No.
  • What happens when you connect the external hard drive to the computer?  "Unrecognized USB device. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. "
  • You are able to access the other USB devices on the computer? Yes, OK on USB PC camera and three other player flash of 4 & 8 GB.

  Hi Halima, problem solved. Got a confirmation of my small voice try a USB port at the back of the PC, from the front two, it didn't work.  And, Viola! Nice day. Namaste.

• USB drives suddenly not recognized by Vista 64 SP2

  2 USB drives that work on another machine to Vista (32-bit) are not recognized and do not appear in my computer, but appear in 'remove hardware safely '. These USB drives has worked in my computer up to a week or 2 ago.
  When the disks are inserted a new item will appear in device ("storage volume") Manager who has a subelement ('generic volume') which has a yellow "!" which indicates a bad driver.
  The readers appear in disk management, but any attempt to change the drive letter or view properties gives an error "operation has not completed.
  Try to reinstall the drivers results in a message that the drivers are current, but the problem persists

  Hello

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Ports USB 3.0 not recognized on HP Pavilion G6-2245sq

  I recently bought a HP Pavilion 2245sq G6 and I encountered a problem with USB 3.0 ports. They are not recognized in the Device Manager. I installed some drivers (Chipset, graphic, Synaptics and so on) and it seems that it did not help with my problem. I confess that I have not tried all the solutions I found in the different posts here on the forum because I think that these specific solutions for laptop. Can someone help me please?

  Furthermore, I believe that I can't have the latest drivers because I am running Windows 7 Ultimate 64 bit and I can only find Windows 8 drivers on the official website.

  I also tried to find a driver for them using Windows Update Driver command in Device Manager and it says that it manages.

  Here is the USB 3.0 for Windows 7 64-bit driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• PX1394E - 3 50 (500 GB HDD USB 2.0) not recognized by Win XP SP2

  Hello. I just bought and traded because I thought the first was faulty, a PX1394E - 3 50 500 GB HDD USB 2.0 external hard drive that uses Fire Wire, USB. Now I ve tried all USB devices, to begin with it uninstailling everything on we / off on to just pluging it when we / off and it keeps saying be the devide was not recognized and it doesn't propperly (small box pop up bottem left of the screen)

  Now Issve exchanged it once already, and he said that the unit was defective, but having exactly the same problem with two different cameras? This seems a little more bad luck for me.

  If anyone can help, that´d be great.

  -Dan

  Hello

  You have software of Regen with your HARD drive? I don't know if this can help, but check the Toshiba download page and you'll find a version for Windows XP Home edition. Maybe this will help.

• WNR2200 Netgear ReadyShare USB storage does not

  I have trouble getting the USB ReadyShare working on my router Netgear WNR2200 storage. If I reset the router to factory by using a paper clip and now the reset button in and then just connect a computer to Ethernet, 1 Port, it works fine and I can access by typing just "\\readyshare" in windows Explorer. Unfortunately I can not leave the router with its factory settings as it is not good for my network, I disable DHCP, because it's the 3rd router on my network. The router itself works great when I do that, all the computers connected to have a connection to the internet and can also connect to each other etc... purpose storage readyshare file sharing no longer works. It's just as if she is not there.

  While I was trying to experiment when he actually stopped working, so I reset the router to factory settings and started again. Connected to the computer first to 1 Port Ethernet and it worked fine as before. Went in the router settings and turned off DHCP and it has always worked well. It is only when I actually connect the router to other routers which ReadyShare USB storage stops working. When it is assigned an IP address from my main router which is the DHCP I guess? I don't know why that's upsetting it well? I checked on the same workgroup (a setting that I didn't notice initially) but also makes no difference.

  Does anyone have an idea what I am doing wrong? I guess it is just configured wrong and it's probably something really simple, but I can't see it. Any help would be much appreciated, thanks!

  Simon

  Change the LAN IP is affecting an IP address on the WNR2200 to be in the same range of main router.

  You will be able to change this in the LAN Setup.

  The steps would be:

  1. do you have a computer just be directly to the WNR2200 and nothing else.

  2. navigate to the router admin page.

  3. change the LAN IP to a unique IP address, such as 10.0.0.200 or one IP address that is not used in the network.

  4 disable DHCP.

  5. once the settings are saved, connect the main router to one of the WNR2200 LAN ports.

  From there, you should be able to access the USB key.

  Let me know what happens.

• Canon LBP 2900 B: USB cable is not recognized by Setup on Windows 7

  The USB is not recognized by the Installer before once. I was in windows 7 and downloaded the drivers from the official Canon Web site, so I've upgraded to windows 10 but a few reasons that I rolled back to windows 7 but now the printer driver is lost so I decided to reinstall. I've seen a lot of discussions on this and in this respect Canon website but nothing works at all. Here we are with an image where the device and printers can detect the Cannon printer but the installation program can detect it at all.

  

  Also, I tried these things:

  • Reinstall the software.
  • Tried to update the existing drivers, and then restart the computer.
  • Changed the serial port.
  • Download the software again.
  • Print management > delete data...

  Help me in this please.

  Kind regards

  Siddharth.

  Hello Siddharth,

  Thanks for posting your query in Microsoft Community and appreciate your efforts to solve this issue.

  Have you tried to connect to any other USB device? Has been the result even?

  I understand that the USB device is detected by your computer, but could not install the driver and get the message "cannot recognize the USB connection. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• External USB devices are not recognized

  * Original title: Ext usb devices appearing is not in my computer

  ACer laptop WIn 7 amd a8 quadruple-heart: when I log about 1 T external usb 2.0 or 3.0 hardrives or key USB 64 G,.
  Device Manager displays the devices, but they do not appear in the list of computers. I have other ext hardrives and the keys that operate without problem.
  I have to go to disk management and see that they appear but they do not have a drive label assigned.
  Then I have to give it a label letter manually it will appear under my computer.

  I tried the same features on a laptop HP with Windows 7 without all these questions.

  Thanks RTierra

  I have found a more permanent solution. At the command prompt, type Diskpart

  type

  automount

  If the answer says disabled, type

  automount enable

  Once I did, my USB keys have been recognized automatically when it is plugged.

  Why the setting has been disabled? who knows.

  I hope this helps others.