No zoom control with Lifecam Studio on Win7 64 bit

Similar Questions

• C# 2008 - unregistered control error TestStand2012 ActiveX on Win7 64 bit OS

  Hi all

  I hope someone can help with pointing me in the right direction.

  I have a c# 2008 TestStand2010 ActiveX control (on the form) application. It is originally created in Windows XP, 32 bit and it works fine.

  Now, I try to take the program to another PC with Win7 64 bit and TestStand2012.

  I recompiled already successfully the solution with TS2012 on Win7 64 bit OS and I put "Any CPU" configuration manager "x 86". But when I'm debugging or running the program, I always have an exception ' class not registered (Exception from HRESULT: 0 x 80040154 (REGDB_E_CLASSNOTREG)).

  When I remove the TestStand ActiveX control on the form, the program works very well. So I was wondering, if TestStand2012 is available for 64-bit? I have install TS2012 directly from the CD. Is there another TS 2012 special package for 64-bit? or the CD version is 32-bit and 64-bit?

  If nothing wrong with the software, I missed something in the settings of c# language? Any suggestion is appreciated.

  Thank you and have a nice day.

  0049 wrote:

  Thank you.

  I already have.

  He now works then? This should work if you have set to x 86 platform. There must be a problem with the way you set the platform. Look at the example of c# UI project. It already does. Maybe you do not run the executable right. The exe file is built in a different directory for each default platform.

  -Doug

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• LifeCam Studio works with laptop, not the Office? (Pilot questions)

  I have a LifeCam Studio that works with my Acer laptop but does not work with my desktop computer.

  Skype and ManyCam on the desktop, suffice to say that the unit is used with another program. I uninstalled and reinstalled the program and the driver manager devices, as well as the uninstall and reinstall the LifeCam software.

  In my laptop Device Manager, the camera returns as LifeCam and a composite device, but on the desktop, it only installs under imagery as "webcam."

  Any ideas?

  Hello

  If another application has control of the camera it is not available for use by others
  programs up to what he was released by the control program. Usually, the camera will
  be released when you close a program. Check in the Task Manager and close the program
  If shown, or restart. Some messengers has control of the camera, so you would need
  to ensure that the program has closed before the unit would be available for use
  in other programs.

  See the section "" I see the following error message: the camera is in use by another program "article."

  Troubleshooting: Webcams
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  You can also run the troubleshooting of devices & integrated utility and check the issue.

  Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Let us know if it helps. If the problem persists, we will be happy to help you.

• I want to record 1080 p with my Lifecam Studio, this software is available?

  Hello

  I recently purchased a Microsoft LifeCam Studio 1080 p. I understand that the software provided record in up to 720 p.

  I'm looking for a software that will allow recording 1080. I am currently trying to connected to my Macbook Pro right now.

  My office is an Intel Core i7 920 @ 3.33 ghz with 12 GB of memory and a 2 GB XFX Black Edition 5970. So more than powerful enough to handle the hard power draw record 1080.

  In advance, I appreciate a lot of help.

  Kind regards

  John

  Hello

  See this link-

  http://Techland.time.com/2010/09/17/quick-look-at-Microsofts-LifeCam-Studio-1080p-webcam/

• VB6 with DAQmx compatibility with Microsoft Vista and Win7?

  Hello

  I'm trying to figure out how what are my options for running my VB6 applications that use the API C of NOR-DAQmx with Vista or Win7.

  I have certain applications that we have maintained in VB6 (with Measurement Studio 6).  I programmed the software for traditional OR-DAQ hardware originally.  I suppose that I used for about 10 years or more.  About 2 years ago or if we needed to use our software with hardware recent DaqMX I've been able to use the API C OR-DAQmx for Visual Basic 6.0.  My application really support two hardware platforms simultaneously.  The person responsible for the project wanted to have 1 single application managed the two platforms (daqmx and inheritance).  So far, it's all great.

  If anyone knows what are my options if I want to use Windows Vista or Windows 7.  We are currently running this app on Windows XP.  I'm ready to upgrade my software if necessary although I have to spend to VB.net and Measurement Studio 7.1 (I currently have).  But if we were to happen tomorrow is there any compatilibility. I read that the traditional / legacy NOR-DAQ is not supported in Vista (Win7).  I googled and found there was a beta version which seemed to weakly in support of the legacy but did not support USB devices which is what I have (6020e (inheritance), SCXI (daqmx), 6259 (daqmx).)  I've heard that Windows 7 will have a virtualization system for XP applications that do not work natively under Win7, but for some reason, I doubt that the drivers and hardware will be run this way.

  Also, should there be differences between Vista and 7? I'm an XP user and computers I support many XP so I really have no experience with Vista.  I plan to install the Windows 7 RC to try some of this stuff.

  Thank you, David

  Use of our released traditional DAQ drivers is not supported on Vista systems, even running in virtual Windows XP mode. The driver works at a lower level which can emulate a virtual mode.

  However, we have a public beta version for a traditional DAQ driver that works for Vista. You can read about this version beta here

  -Abram

• Install LifeCam Studio offline

  I have recently loaded several LifeCam Studio webcam on XP SP3 machines installation.

  However, the only problem that occurs is that the installation wants to an available internet connection to install the necessary drivers, even if I download the executable file of the product support page.
  There is workaround to allow offline installation? The customer that I install these cannot allow an available internet connection on these machines, for security reasons.

  Hello

  Installation requires Internet access to connect to a specific server from Microsoft.

  See the link.

  http://support.Microsoft.com/kb/973297

  See also the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/LifeCam-cinema-installation-with-no-Internet/2383270b-5080-4ace-AAE8-972007fd0f07

• LifeCam studio won't launch

  Hello

  My lifecam studio worked pretty well, but I kept getting a message saying something about the requirements is not enough
  but it was the path in front of the requirements. but I was going to upgrade my CPU when even if I upgraded from AMD Phenom II x 4 965 140 Watt 3.5 Ghz
  to a Phenom II x 6 1100T 125 watt 3.4 Ghz after this update the lifecam studio software will not launch if it dose it stops a few seconds
  and said he met an error inform Microsoft of this error. I can use the webcam with other programs like adobe flash media live encoder
  and other streaming broadcasters. but I can't use it by its self like to take a photo or video to upload to youtube, things like that.
  It does not work with Skype, yahoo messenger, Microsoft, live video chat sites or programs. I was told that I had to update the bios I did
  but which has not helped with the lifecam studio, but with other hardware and software. I have the AMD Phenon II x 6 1100t clocked at 4.4 GHz
  and that did not help ether are my Nivida GeForce 260 SLI graphics card OC HD 3D ready I have 8 GB memory 1000GO drive hard windows XP
  SP3 gigabyte mother board everything is new, less than a year less than 6 months old... I put the AMD Phenom II x 4 965 at the back of the computer
  and the software worked as he did before. but I need the AMD Phenom II x 6 1100t I play a lot of games on my PC and I also live stream
  at the same time and the AMD Phenom II x 4 956 clocked to 5.2 GHz could not keep up.
  I hope I have not confused anyone, but I wanted to give as much info as I could to help him.

  Thank you!

  I discovered what the problem was.

  It is the combination of XP a 6 core CPU and the Lifecam software, they do not work together.

  To get the lifecam to launch, I have to go into the Task Manager and click on process and then right-click on the exe lifecam, then click set affinity, and then unslect 2 carrots to make lifecam think that there are only 4 hearts, then it works fine. The only downside is: you must do this every time you want to use the lifecam.

• Microsoft Lifecam Studio freezes frequently

  Can someone tell me why this is happening?

  I didn't start playing the drums with the students, but this CAM keeps freezing upwards.

  I have 5 m USB extension, enter a laptop Dell Inspiron 32-bit software.

  Kind regards

  Marco

  Hello

  1. what program do you use to access the Internet through Microsoft Life Cam ?

  2. the program-specific problem or is it random?

  Method 1:

  You can read the following article. It States on the possible troubleshooting steps that we can try to fox to the question:

  Microsoft Life Cam Readme and troubleshooting information

  http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx

  Method 2:

  Downloaded the last life Cam Studio updated Firmware and check if it can help solve the problem:

  Life Cam Studio: http://www.microsoft.com/hardware/en-us/p/lifecam-studio#support

  Also check out the following link:

  Support for Microsoft mouse, keyboards, cat life, life Cam & more

  http://support.Microsoft.com/GP/LifeCam

  Let us know if it helps!

• green tinted receiver lifecam Studio

  Now just bought the LifeCam Studio (HD 1080 p) so I'm not very intimate with her.  When at last be able to communicate with a family member of the small image that is displayed in the lower left corner of what they received as well as what they received was largely tinted green color not true.  What we received was.  Is there something I need to do?

  Hi RichardBrakenbury,

  You can read the following article and try the suggested steps and check if that helps:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Hope this information is useful.

• LifeCam Studio has stopped working after the firmware update?

  Hi all.

  I bought one of the new LifecamStudio 2 days ago. I installed the camera, following the instructions of course. At the end of installation, I was able to get my self in the window of the Lifecam software, up to now, no problem, the device worked. Suddenly, a pop-up message will appear, telling me that the firmware of the device should be upgraded, then I pressed OK. The update of the firmware started but was abandoned shortly with an errormessage, saying the upgrade was not successful. I tried to reinstall the firmware, but now he tells me Hat I have the latest firmware installed. The nproblem is therefore now that, when I instert my camera in USB port windows find the camera, but as soon as I start any program it uses the camera he's leaving a Lifecam icon (in the hardware Manager that is) to an unknown unit. Software Lifecam studio told me that there is no camera installed. I installed the camera on other computers without a bit of luck.

  / Stefan

  Fixed it :)
  In the Device Manager under imaging devices I've seen "Webcam" - before the botched fw update, it said 'Microsoft LifeCam Studio' and was a diff driver.  I rolled back the driver (or if it does not work you can force it to use one of the program files \ lifecam) then reinstalled lifecam - my cam works now.  Now - what's the problem with this update utility and why it changes what is driving the camera uses?

• LifeCam Studio must adjust settings to each Windows session

  Each time before use twinkle 'Lifecam Studio' I have to adjust all the settings like Zoom, 50/60 Hz and others...

  Savings by apply and OK is effective only during the Windows session...

  Is there a way to save these settings to a new desired adjustment? ...

  Thank you Jaime

  Hi Jaime,

  Thanks for the reply.

  We are happy to know that your problem has been resolved.

  You are always welcome in our community for other issues related to Windows.

• Export as... dialogue - which is the icon next the Zoom controls?

  Hello

  I tried to find out what that icon to export as... dialog box is to the left of the Zoom controls. Any ideas?

  Thank you!

  Andrew

  

  If your document contains transparency and you select say PNG with transparency checked in the settings of the file, by pressing this button changes the preview of the transparency of the white and gray to light gray and gray.

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Creating controls in Documaker Studio

  Hi all, we seek to create controls using Documaker Studio.  I see that the MICR font used to print on the check account routing numbers is included in Documaker.  My question is about the special characters printed with these numbers.  Is there some set upward we do that automatically generates these?  I don't see anyway to insert them ourselves.

  Thanks in advance for your help.

  Hi Matt,

  Thanks for the info about the placement.  My question was specifically about special characters/symbols that delimit parts of the MICR-line that you mentioned above.  With some additional research, I discovered that these are represented in the Documaker Studio using the characters A, B, C, and D in their place.  Thanks again for your reply - will be useful when you install these.