light mouse pad

the blue light around the mouse pad does not work when the buffer is unlocked hurt when is locked red light works. What will happen to the blue light? y at - it a setting that I can check?

Hello

Try to press and hold the fn key and press the space bar.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Equium A300D - question about light mouse pad

    Hello

    If someone could help, it is not so much a problem, but I recently bought the Equium A300D and there is a band of light above the mouse pad that are turned over.
    I don't know if I turned it off in some way or how to turn it on, just kind of hoping that someone might be able to help.

    Hello

    Thanks for the comments.

  • Synaptics mouse pad

    Why doesent light blue around my mouse pad work

    Hello

    Try pressing the fn key and the space bar.

    Kind regards

    DP - K

  • Mouse pad does not work

    A few months ago my mousepad stopped working for no. (obviously there must be one) reason. I noticed it after that I started to share music with other computers on our network. At first, I thought that the red light was something to do with it, then I discovered that the little symbol underneath was a mouse pad.

    My laptop no button on it that turn the pad on and apart, and properties of the Synaptics said that it works well and is connected to the right channel.

    Hello

    Check with support of their documentaton online and drivers, system manufacturer and ask in their forum
    (if there is one) that several will have keyboard shortcuts that will turn the Touchpad on or off.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
    and some come with a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    I hope this helps.
    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Mouse pad works only in Mode safe

    The mouse on my computer stopped working. When I log in an image comes from this mousepad with a circle and a line through it, and then a small yellow light appears on the mouse pad. The mouse pad works in safe mode.

    Visit your PC manufacturers support site and reinstall the drivers mouse pad and the drivers from the chipset possible.

    Then in windows update settings, disable the recommended, leaving only important updates to install updates for auto

  • Mouse pad HP Pavilion A6 - 3400M

    Hello, I just got a laptop for school and I recently had some problems with it. I play a few games when I have time, but usually I use my cell phone for anything else then the school work.

    First when I exit or open Skype the sound that passes through my headphones sundenlly out from the speakers. A little weird and I have to plug my headphones, otherwise it will continue to do that. I also had an execution only one error.

    Second blue light of my mouse pad does not work when I turn on my mousepad. When I turn it off the red light is there and when I turn the mouse pad works perfectly. The only problem is the light around him does, as I said.

    Thank you for taking the time to read this thread and I hope you can help me solve my problems.

    the mouse pad can be enabled/disabled using fn + space

  • Satellite NB10T-A-101 - mouse pad does not work

    I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

    But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

    I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
    Any suggestions would be greatly appreciated
    Thank you

    Hello

    Have Hmm you also checked the FN + F5 key combination?
    This would enable and disable the touchpad as well.

    But from my point of view, it would be possible that the touchpad module is malfunctioning.
    I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

    Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

  • Qosmio X 870 - mouse pad does not work properly

    Hello

    My mouse pad is facing upward and I don't know why. It works when I restart the laptop, then after a few minutes, it does not at all. I checked the properties in Device Manager and it says it works properly... which is not the case. I uninstalled the driver and reinstalled. He always does.

    Not sure if this is related to some of my key of F does not not to my other thread - https://forum.toshiba.eu/showthread...ns-not-working

    A question I've had for a while (which may or may not be related) is my TOSHIBA x 64 compatible ACPI logical value and general-purpose device has a problem. On the device manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I uninstalled and reinstalled this with driver Toshiba utility pack and it always happens with this error. I cleaned the registry several times using tuneup utilities 2013. It is probably not bound as it has been like this for a long time with no obvious side effects. But it's annoying nevertheless.

    Maybe windows 10 could save the day (I'm on the 8.1). I hope. In the meantime if anyone has any suggestions I would be very happy.

    Good, someone else who might find this is useful - it turns out that it was a hardware failure. My laptop hinge was loose, and therefore the case had to be replaced. He also replaced the mouse pad - now it works fine.

  • Mouse pad does not work properly

    I bought my laptop toshiba 2 moths ago, but yesterday, my mouse pad no longer works correctly.

    I can still use it to move the arrow on the screen but cannot use it to doubleclick on something else.
    I need to use it in conjunction with my left hand button which is very frustrating.

    I was wondering if anyone had any ideas how to solve this problem, thanks

    On this virtual path, it is not easy to understand what is the problem there. It is not easy to tell if problem described is related to the touchpad software.

    Try to do system restore and roll back the OS a few days back and check if the same problem persists.

    By the way: which laptop model you have and what operating system are you using?

  • Satellite L775 - mouse pad does not work properly

    I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

    What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

    What's past and how to fix this?

    Thank you very much.

    > What's past and how to fix this?
    After reading your ad, I still don t know what is your problem.
    > My mouse pad is not working properly
    How to understand this? What does not work properly? What happen exactly when you start your laptop?

  • Satellite C70D - impossible to unlock the mouse pad

    Hello

    My mousepad doesn' works as it should. I tried to unlock with FN + F5, only F5, FN + F9,... but nothing helps.
    All I can do is move the cursor and use the mouse pad when it keeps the left mouse button at the same time.
    Someone at - it a solution?

    To be honest I don't never heard such behavior touchpad.
    Did you test all parameters of the touchpad?
    If there is possibility to set all settings as default please do and test the functionality again.

    In any case, best test material is to reinstall the operating system and check the functionality of the touchpad with "presets".

  • The mouse pads, the Satellite Pro C660, do weird things

    Hi guys, I have a Satellite C660 Pro who has developed a weird problem

    When the laptop has been for some time, the mouse pad will start scrolling and horizontal scrolling when I do not want to control the cursor of the mouse almost impossible until I restart, then it works very well for anywhere between 20 minutes and a few hours before it goes nuts new

    I tried to update the drivers, I also tried to disable the ability of mouse pad to scroll or do anything other than to be a mouse pad, but this does not seem to have changed anything

    any ideas out there?

    Have you also tried updating the BIOS?

  • Mouse/mouse pad does not work on my Satellite M30X

    Hello

    I started having problems with mouse pad & mouse on a Satellite M30X. By clicking on the icons on the Desktop gives erratic results as evil etc start application and does not. The operating system has been reinstalled with a new hard drive and put BIOS up to date without success.

    Looks like maybe the motherboard has everyone seen elsewhere... and have the solution.

    At soon Scottie

    Hello

    tried with a few external mouse/keyboard? If it is not already then try and check the what happening. In both cases I suggest to contact a local for a hardwarecheckup servicepartner, because your question seems serious and cannot be resolved with software, DO-IT-YOURSELF tips or things.

    Here´s a link to find the nearest servicepartner in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Would be better to let a few technicians do their work ;)
    Welcome them

  • HP ENVY 17: Mouse Pad restore default settings on reboot

    Since the upgrade to Windows 10, my settings click pad mouse pad restore settings by default whenever I restart my laptop. It's incredibly annoying. Please can someone HP actually solve the problem? I've tried everything. I even contacted Microsoft who said that HP should provide a fix for this or work with their supplier of cushion click to do.

    Ahhhh!

    Hello

    Try the following.

    Hold down the Windows key and press R

    In the run box, type regedit and press enter

    In the registry editor, navigate to the following

    HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

    Inside, look for a key named DeleteUserSettingsOnUpgrade

    If it is present, right click on the key and select Edit

    Set the field data of the value 0 (zero) , and then click Ok.

    Close the registry editor.

    Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

    Kind regards

    DP - K

  • Satellite C660 - constant click of mouse pad

    Hello

    The mouse pad on one of our laptops C660 is almost like the mouse pad is constantly exploited.
    If you place the cursor on an icon, it will open this file several times.
    If I turn it off and plug in a key USB mouse stops the issue.

    I tried:
    malware research
    deactivation/reactivation
    Uninstall/install
    system restore
    Update driver

    Nothing helps.
    I don't know if it of related or not, but I do not no network connectivity.
    SE connects with happiness wireless, but that's where it ends...

    all of the tips!

    Hello

    I think that its touchpad associated setting.
    Go to control panel-> mouse control-> last (Advanced) tab-> advanced setting button

    Here you can see the area: period of time after the last key is hit. Try to solve this long

    In addition in the pointer speed and tapping settings click on setting button.
    Here I recommend that you change the level of tactile sensitivity to LOW

    Last but not lease you can also turn off the tapping. In this case, you can use the left touchpad button click in the icons...

Maybe you are looking for

  • Music Apple IOS 10 on 4G does not work

    Hello given that I have upgraded to IOS 10 my Apple music works in WiFi and not on 4G more. When I click 'for you', 'Browse' and 'Radio' I get only an endless LOADING. Restart, reinstall, etc. does not solve the problem. In the settings of data using

  • Game Center, not signing in

    Hello I use iOS 10.0.1 on an iPhone 6 and Game Center will not sign with a newly created ID.  Looks like it will sign, I provide with a four-digit security code, accept the license agreement, add a user name and then a loop is executed at the beginni

  • How can I add the CSS styles used by Firefox player mode?

    When loading from the view of the reader, the text is aligned to the left by default. I would like to be well to the left and right justified. At present, I can arrange this by editing the css style in the view "Inspect element", but it's not permane

  • HPE-400f: my newly installed SSD storage does not add to the top.

    It shows 176 GB free of 232 GB which is 56 GB used. When I open the player and select the file and click with the right button on properties, it appears than 43.8 GB. Where do I use the extra 12 GB for? I have hidden files and folders showing. Also,

  • text file as config

    Hello world Once again I have some difficulty. I'm trying to control Goepel Cascon with my labview. What I basically want to achieve is: I want a configuration file that contains a part of the serial number of my share a name. The serial number is pa