Lightroom and PS

Similar Questions

• Hi, I want to migrate Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a hard drive that is separate so I can get to o

  Hi, I want to migrate thousands of images of Aperture library 3.6 to Lightroom and when I double click on Aperture App it won't open. I'm on OSX Yosemite 10.10.5 and I keep the nearly 200 gigabytes of photos on a separate hard drive so I can get more old photos looking at the content of the package and by copying and pasting in a recovery file, but it will be painful and very long. What do you suggest me? I thought that Aperture 3.6 was supposed to open at Yosemite or El Capitan? Thank you bripoppamac44

  and when I double click on the App opening, it does not open.

  What happens, when you try that? You get an error message? If so, what error?

  Opening 3.6 works well with Yosemite 10.10.5.

  d I keep the nearly 200 gigabytes of photos on a disc hard separated so I can get more old photos looking for the content of the package and by copying and pasting in a recovery file

  What is the file system on this disk? And how the player is connected?

• Lightroom and Canon DPP 4.5

  Perfecting a new workflow for my images. I would like to import my. Raw CR2 files in lightroom unaltered, scroll and cull those I don't want to use the features of bright rooms. I find Lightroom excellent functionality and I am used to it.

  So, ideally, I would like to deal with, or have the option of treatment, in DPP rather than Lightroom raw files. I can use lightroom development module rather (will do my own experiences), but as the ability to use both Canon. I would like to make the same way I use photoshop, i.e. "change in" and have put in place for that DPP. Unfortunately, when I try to put in place, I don't get the option to send the raw (.cr2) PPD files. The only options are .jpg, .tiff, etc.. Of course DPP deals only raw files, so I'm stuck.

  Once the raw files are processed, I can refine it into Photoshop as you wish.

  If I understand now, I can shoot files in lightroom and then must open DPP separately to make my raw editing, then translate the in lightroom to backup the database and end in photoshop, if necessary. I do a lot of panos pictures of sew and this workflow seems to be a pain / redundant.

  Someone there suggestions in how to do?

  That you have discovered, a workflow using Lightroom and Canon DPP on RAW images won't be good at all. These software are not designed to work with one another (the opposite of LR and Photoshop, which are designed to work together).

  So, since you asked for suggestions, my suggestion is not what you want to hear, but nevertheless it is my suggestion: don't do this. Do all the work in LR, or all the work in the DPP, but not a combination of both. You will save a huge amount of time and frustration.

• Uninstalling Lightroom and Bridge

  Having had to do a restore of the computer system on my Windows 10 Lightroom and Bridge no longer work. I tried to uninstall, but all I get is "Uninstall failed". Through the clouds, he said that no apps are installed. I would like to know how to get UN-installed apps so I can reinstall them.

  If you get in the CC No. Apps installed app, then click install.

  If fails then use the CC Cleaner tool to remove all traces of Adobe CC applications. Please save all your files the user created, the presets and the like for each of them before you run the cleanup tool.

  Use the cleaning of creative cloud tool to resolve installation problems

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Uninstall lightroom and photoshop

  Hello

  I installed 6.61 Lightroom and photoshop elements 13.

  Now, I bought a new processor, ram, graphics card and monitor, all installed and now adobe applications will have a new activation and code.

  I can't uninstall photoshop elements and lightroom, because applications are not listed in the list of installed applications.

  (Windows 10, 64-Bit, German)

  What can I do?

  If download you again re-installed all a test of backup and running the installer. Then the license with your serial numbers.

  Install Photoshop Lightroom

  Download Photoshop Elements | 10, 12, 14, 11, 13

• I paid every month on my PC of lightroom and Adobe Photoshop, this will cover my lightroom and photoshop on my MAC?

  I paid my month fee on my PC of lightroom and photoshop, this will cover my lightroom and photoshop on MAC?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• C.C. of LIGHTROOM and olympus camera

  Hi, I recently bought a digital camera Olympus EM5 brand 1.  There is no installation to activate the correction of lens on Lightroom cc. Can someone help please?

  Work with lenses profiles in Adobe Photoshop, Lightroom and Camera Raw

  

• Adobe lightroom and photoshop and camera raw for ubuntu

  I need adobe lightroom and photoshop for linux ubuntu. I have try the wine but not work. Why adobe don't release lightroom AND photoshop ubuntu linux?

  Adobe is not writing programs for Linux Creative Cloud for Linux (Ubuntu)

• How to get rid of the offer to try CC with Lightroom and start my Lightroom 6 as usual?

  How to get rid of the offer to try CC with Lightroom and start my Lightroom 6 as usual?

  I installed Lightroom 6. There are now worked fine.

  Now when I try to open the program, it does not open.

  Instead, a window appears with an offer to try Lightroom CC.

  I don't want to try Lightroom CC as a monthly payment.

  I see not a way to get rid of this window a start my 6 Lightroom as before.

  Open as a test and check your sign in Adobe. Once you Sign In it ask for a serial number. Enter the serial number, you have to V6.

  Only then disconnect.

• Variance between Lightroom and Photoshop image

  I often export my work from Lightroom for retouching in Photoshop.  When the image opens in Photoshop, it is not as bright and vibrant as the image view in Lightroom.  I have nothing in Photoshop can restore the image to its counterpart in Lightroom.

  I am running Windows 10 and Adobe CC 2015.5.  My screen is a 24 "LED-backlit Dell U2413, calibrated with Spyder5pro. I export images from Lightroom to matte printing paper as sRGB as JPEG with a quality set at 100 and the resolution to 300.

  If I find the image exported to any other viewing application, Lightroom Jpeg seems well.  It doesn't seem bad until it hits Photoshop.  I have not even to save in Photoshop. It looks like offshore as soon as it opens.  Is there a setting in Photoshop I'm wrong I don't understand or know?

  I'll try to include a screenshot of the two for a side-by-side comparison.

  

  When Lightroom and Photoshop the colors do not match, it is usually caused by a defective monitor profile.

  Did you upgrade to Windows 10? If so, have you done a calibration since the upgrade?

  Windows 10 is known to install the manufacturer monitor profiles, which tend to be of poor quality and will replace all current profile.

  It is also possible that a profile you created by calibration can be damaged.

  As your monitor seems to be a wide range (which means about Adobe RGB), try to set the monitor in Adobe RGB profile.

  Press the Windows key + R, type colorcpl in the box and press ENTER.

  This will open the color management dialog box, and you can now see what profile is set as the default, which will tell you if Windows has replaced the original profile, or if your calibrated profile is always default.

  Now follow the instructions in the screenshots below, and make sure you check out use my settings for this device.

  If this solves the problem. re - calibrate with your Spyder.

  

• Pixelated photos in Lightroom and after export

  Hi, I'm new to Lightroom and photo in general editing. I also recently got a Macbook Pro of the retina. When I Zoom on the RAW files before import into Lightroom, they do not appear pixelated (see the picture on the left). Once I have import to Lightroom, they are pixelated when you zoom in. I read somewhere that it is so that you can see how your editing affects each pixel. However, once the photo into LR converting to jpeg and export, they are always very pixelated when zoom you (see the attached picture to the right, in particular the diagonal line on the left of the photo). My questions are: why are jpeg images very pixelated when RAW files are not at all? Is this normal or is at - it a setting I would have changed? I also understand that jpegs will reduce the quality of the photo, but it seems like a significant difference. I have also attached my export in Lightroom settings, even if the exported photo is the same quality that I see in LR. Any help would be greatly appreciated!

  

  

  When you look at the raw file before importing, you don't see the actual raw file, but an overview of the embedded jpg.

  I'm guessing that the Mac preview (or whatever application you use) requires a lot of smoothing when the zoom, which gives you a false impression of what the image actually looks like.

  Other that that, there is no point in an image is displayed at greater than 100% magnification to judge the quality.

  Indeed, 100% is the magnification is valid, because a single pixel of the image is represented by a pixel screen - and gives you a true representation of the image.

  So forget the built-in preview and view the image at 100% in Lightroom to judge the quality.

  It is even for images exported - view 100%.

• Keep the dng or CR2 files when switching from Lightroom and Photoshop.

  From Lightroom and Photoshop, how can I keep the dng or CR2 files. Now it changes the psd and when I return to Lightroom it removes options in the section of Calibration of the camera, so that while I have a choice (Adobe Standard/camera faithful), after returning from Photoshop file I have "Embedded." How can I keep the dng or CR2 files

  Adding to the good advice of Alfred - a raw file cannot be registered as the other files.

  Its only use is the basis for the creation of new files, which must be regular files, such as tiff, psd or jpg.

  When you edit a raw file in Lightroom, it does not change the file, the changes are written to the catalog.

  Optionally, save the changes in the form of metadata (xmp) sidecar files, or in the case of DNG in the file itself.

• Lightroom and Photoshop CC CC

  Hello

  I would get CC with Lightroom and Photoshop CC and I would add to all 3 of my computers, iMac, Macbook and my Dell PC.

  Can I do this with a license?

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Sign in your account of cloud on computer A or B to be able to use on computer C

  -via https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Interface CC with Lightroom and Photoshop CC problems

  I downloaded the trial versions of CC of Lightroom and Photoshop CC (5 days left!). I have disabled the CS6 and LR4, I already installed it on my Mac. When I try to edit in Photoshop Lightroom CC CC, it does not work. After a long while (a few minutes), I get a format error message or a message "failed to open photoshop cc." I checked the preferences of many users and tutorials Adobe blogs. He has always worked with CS6 and LR4. The Photoshop CC and LR CC function as separate applications. Can anyone help please?

  Reinstall LR and PS from the CC app.

  First LR and Ps

• Lightroom and Photoshop Installation troubleshooting

  Hello!

  I tried to install Adobe Photoshop CC and CC with Lightroom and the Setup program is completed with errors below

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF024...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF024: impossible not to move the file in "C:\Program Files (x 86) \Common {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D} \_278_61718131ff8a 0f34364b00be4890da83" to 'C:\Program Files\Adobe\Adobe Lightroom\Helpers\DynamicLinkMediaServer\dynamiclinkmediaserver\1.0\MXF_SDK_4.4.33_vs10.d he 's' error 32 El proceso no tiene acceso al archivo porque esta is used por otro proceso... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (271 Seq)

  -------------------------------------------------------------------------------------

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF024...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: Adobe Preview CC 1.0.0.0 {A3B6E381-F2E8-47CD-87B4-96B1E3FF61D3}.

  ERROR: DF024: impossible not to move the file in "C:\Program Files (x 86) \Common {A3B6E381-F2E8-47CD-87B4-96B1E3FF61D3} \_2052_3ee4c568d00 54f5b21d63d4fe818c79c ' to 'C:\Program Files\Common Files\Adobe\Plug-Ins\CC\Generator\preview.generate\node_modules\ws\build\Release\bufferut il.node' error 32 El proceso no tiene acceso al archivo porque esta is used por otro proceso... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. SEQ (2053)

  -Payload: Adobe Photoshop CC 2015 Core 16.0.0.0 {793C2BF7-A4FE-4608-91C9-9282C5801C21}.

  ERROR: DF024: impossible not to move the file in "C:\Program Files (x 86) \Common {793C2BF7-A4FE-4608-91C9-9282C5801C21} \_1283_f152ce0fcb7 c41fd8de4f0fd86d20358 ' to 'C:\Program Files\Adobe\Adobe Photoshop CC 2015\Required\CEP\CEPHtmlEngine\icudt.dll' error 32 El proceso no tiene acceso al archivo porque esta is used por otro proceso... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (292 Seq)

  -------------------------------------------------------------------------------------

  Installation environment:

  Windows O.S. 10 Pro

  I have rights admininistrator

  But I don't know how I can run these programs as administrator of the creative cloud.

  Please can someone help me?

  I thank very you much in advance!

  Have you tried each of the troubleshooting steps in this help document? Error code output, output 6 7 install Adobe Creative Cloud code.