Lightroom in very unstable CC

Similar Questions

• WIFI connection is very unstable

  OK, I recently started having problems with my wireless network. Before we continue, I want to clarify that the laptop fell off my table of landing itself directly on the wireless network card and of course, it's while my question has been raised. But, I hope this isn't the case and that no internal damage was done because it fell away and he doesn't seem to be serious damage.

  My connection is very unstable. At that time I will have spent typing this I will have lost once. Once every 2-5 minutes. When I lose my connection I just remove and reinsert the card. It usually works. Sometimes, I get a message asking me to install new hardware, the PCMCIA MTD-0002. And other times it just re - acquired my IP address and run a little longer.

  I looked around the internet a little and found many with the same question. Zero with an answer that worked for me, then again with a Toshiba laptop. I hope that you the pros here can help me out. The first thing I tried was to get a new driver. But in my device manager it says that they are all up to date and I have not had any other experience download from sites, and I don't want to get hurt.

  I'm running on a Toshiba Satellite, I believe that it is a type R, further I don't really know. He's OLD. If there is more you need to know that I will answer quickly.

  Thanks in advance.

  Hello

  Like you said that the issue was raised after the laptop is dropped.
  In my opinion it's a reason from time to time interrupts him. Maybe some connections are loose.

  The external PCMCIA card is recognized and don t think that this could be a software or driver problem.
  But to be sure, you can contact the support of the manufacturing of PCMCIA card.

  In any case, I think the problem is related to the fall and the technician must check the slot.

• Satellite L555-10R - wireless connection is very "unstable".

  Hello to you all!

  Something went wrong, and my last point of backup recovery does not resolve the issue.
  I miss the "Service of auto-configuration" in Windows 7 / 32 b for Wireless Card (i.e. SE TL8191 Realtek)

  Simple example: I have Lan connections and working together for example, wireless and wireless is very "unstable".

  Just one request: technically possible to correct or better to buy the original Windows 32/64 on Toshiba media? (which has not been delivered with my laptop purchase).

  Thousand thanks
  Thank you!
  Thomas

  Ooooops... by the way Happy New Year 2011 from Paris!

  Post edited by: Thomas

  Hello

  The laptop supports the 802.11bgn of Realtek RTL8191SE minicards.
  I've read here in this forum that the WLan driver from Realtek page should contribute to improve the performance of WLan.

  In addition, you must check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=58638

  User AndreaEoF posted the Nice details how improve the WLan conectivity... you need to disable the economy for WLan in the management of power supply...

• Very unstable WIFI connection on Satellite A200 PSAE4E

  Just had my Equium A100 replaced with a satellite pro A200 and for some reason that I am fighting to get it connected to my wireless network. I had the old laptop connected properly and used channel 11 on my WAP.

  Now, after trying to connect my new laptop I find the connection very unstable. I tried different channel numbers, and these worked mainly the lower numbers, but are proved to be slow and unreliable. I have other laptops that are very well using my WAP to channel 11.

  Anyone who has experienced this trouble and what is the solution.

  WAP Netgear wg602. No firmware update available

  See #.

  Macca

  Hello

  Just a question: do you use pre-installed Vista or maybe WXP on your new laptop computer?

• 13 elements Organizer very unstable and high RAM request, items 13.1 Organizer very unstable and high RAM.

  After the upgrade of Windows 8.1 for windows 10 program was very unstable, renewing the driver for the card of 2 GB Nvidia Geforce GT 630 m of 355.62 to 355.82 Organizer is always very unstable during optimization of the catalog. Further wonders RAM WINS 137 MB a few minutes after the start to the top of the program up to 11 000 MB just by doing nothing! Sometimes it becomes even higher, but sometimes both demand falls to 1 400 MB. Still 10 times higher after commissioning. Remember that the program is not used, just slowed down.

  After the update of the elements of 13.0 13.1 this was only possible by cancelling the update file.

  machine: dv7 HP Envy with 16 GB of RAM and core i7 processor

  OS: Windows 10

  We have about 100 000 images in the Organizer

  How to solve this problem?

  You mention optimizing the catalog: This means that the background task is underway. There are also other tasks in the background that can run even if you think that software is inactive:

  -the search for missing files

  -recognition of persons

  -service of records watchted

  ...

  There is nothing wrong with the apparently erratic use of RAM.

  Please give more details on the "failover": made the computer crash, freeze?

  Operations are in this case?

  Your catalog is big enough, but that does not account for "failover".

  You use the recognition of people? A few similar posts, it seems this may explain the failover for the very large catalogs (many small files. XML are stored in the catalog and the database file).

  Optimization means a reduction in fast enough the followed the check of database file size and the re-creation of thumbnails for your 100,000 files photo: who may require more than one hour. If the process responds to a problem or a corrupt file, the program freezes to a percentage of the task...

• OLA! Quero comprar a licença do Lightroom. Very NÃO QUERO o PHOTOSHOP. Quero o Lightroom so. Como FACO para comprar esta licença?

  Quero comprar o sem o Photoshop.nao USO O PHOTOSHOP Lightroom! Very I can not fazer isso no Site da Adobe. Como FACO pra comprar ONLY O LIGHTROOM= SEM O PHOTOSHOP?

  Software & services

  Seleccionar LR, e buy, seguida, em "Quero comprar" glew Actualizacao OU Completo.

• First Pro CC very unstable 2014

  My CC2014 is very unstable, because I updated my Adobe software of creative cloud from CC to CC 2014 and I have been an adobe user since 1999 and I went from FCP to Premiere in 2012. Everything was great, until the latest two updates. What is going on???

  My Premiere Pro was very unstable. I can't make it work for more than an hour to receive the Premiere Pro has experienced a serious error and has to close. I just can't get anything done. I went to work 40 hours a week of 60 hours a week since I upgraded. It is very counterproductive. Help, please!

  I'm having trouble with Illustrator a lot too, but not as important I was wondering if somehow related.

  System information:

  Creative Cloud 2014 Update September 2nd, 2014 - every day I use; PP, AE, ILLINOIS, PS, ID.

  Mac Pro mid-2010

  32 GB of Ram

  OS: 10.7.5

  Processor: 2 x 2.4 GHz Quad - Core Intel Xeon

  Please be aware that the OS X upgrade may lead to permissions issues that have an impact of Premiere Pro and other Adobe applications, especially after opting for OSX preserve your profile. So if you have problems after the upgrade, please see this page: fixing permissions problem which prevents the start of Adobe applications. After the effects of interest area

• Problem connecting, Win 7, WPA - PSK (computer think it's WEP). Managed to substitute, but now very unstable connection.

  Hello, I use Windows 7 to my computer. Here wireless signal is encrypted with WPA - PSK TKIP, but my computer could not register as such (he believes that its WEP). I managed to force it to connect, by manually adjusting for WPA - PSK with TKIP (and the correct password) in the control panel.

  However, the connection is extremely unstable. Often, he simply stops working, although the icon says that there is a link. (Note that this window of available connection has a large red cross next to the signal, because he claims that the settings do not match. He just logs occasionally when I start).

  I wonder if there is a way to solve this annoying problem. I don't know what is causing the computer to see the signal as WEP, when it clearly is WPA - PSK.

  Oh, I found what I think, it is the router in the basement: that said on it: Motorola SBS101E.

  PS: I'm not good on the technical stuff (although I understand basic concepts such as network card drivers, etc., don't ask me not to disable or install a protocol without walking me through the steps).

  Thank you!

  As I wrote, your problem is probably related to the adapter wireless in your office. Maybe it's as simple as that requires an updated driver, but it remains to be seen.

  Result of your ipconfig is quite surprising.  Because you are in a university environment, if we cannot identify a problem with your wireless adapter, you may be able to request assistance from the University of the it Department.  See also comments below on the VPN.

  Here - is more as a matter of interest than anything else - what some of your settings mean:

  Wireless network adapter

  • Your card is a Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC (Realtek RTL8188CE 1 x 1 11 b/g/n Wireless LAN PCI Express Half Mini Card Adapter, which seems to be installed on Lenovo ThinkPads).
  • Your card is automatically assigned (usually by the wireless router, but see below) an IP address of 10.92.129.20.  This address is part of what is called a 'Class A' network, which is generally only used by very large organizations (for example, a University).  This suggests that this wireless network is from University wireless access point rather than a router connected to the modem cable into your basement.

    So it is possible that the antenna on your desktop computer wireless card is not in as good a place as your laptop computer to receive the signal. It's especially if your office uses a built-in wireless adapter, with the antenna at the back of the computer under a desk and near a wall. If you try USB wireless adapter for your desktop computer (or an antenna on an extension cord) move the antenna near a window, if possible.

  • The 'default gateway' for this connection (the address of the wireless router) is 10.92.128.1, which is in the same class A network.
  • The DHCP server (which is what affects your IP address card) is 195.130.132.102.  It is a public IP address belonging to Telenet/Pandora, a Belgian Internet service provider.  In almost all wireless home networks, the DHCP server is part of the router, so your situation is very different.

  Virtual private network (VPN)
  What complicates your Internet connection is the fact that you seem to be using a VPN. This is identified as the 'card Ethernet Hamachi.' I saw many posts complaining that the Hamachi software interferes with various other network connections.  For example:

  After the installation of LogMeIn Hamachi, my continuous wireless network connection disconnected from the internet every few minutes. The wireless connection is ok, but trying to access the internet, I get a message to reset the connection.

  Once I got disabling the network Hamachi (Control Panel-> network) connection and Internet-> network connections, everything is back to normal.

  It happens on two different routers, then the router is probably not the problem.

  This happens with the wired connection.

  I use Windows 7 Home Premium SP 1 64 Bit, Hamachi 2.0.3.89, Intel WiFi Link 5300 AGN.

  LINK

  This is beyond my area of expertise.  If you are unable to determine a driver (or hardware) problem with your adapter wireless and you have installed Hamachi VPN software on your desktop and your laptop, assuming that you really need, you need to get help from the support service of some entity required or recommended use of Hamachi VPN software.

• Photo exported from Lightroom appears very grainy in Photoshop

  A took my photo in RAW and processed in Lightroom.  It is milky and was shot at ISO 8000.  Using the Luminance slider to the title of the noise reduction reduces the noise/grain where I liked it.  When I exported to JPEG in Photoshop it will look very grainy once again, perhaps even more than the original. When I did export I kept it at its full resolution of 3648 X 5472 origin.  I set the quality to 100, it has exported to sRGB and countered the size max and these other options.  I even closed Photoshop and reopened and reopened these photos and they always look very grainy.  To test I did the same thing and it was exported in a TIFF file and got the same look. Very grainy.  HOWEVER, when I open again the JPEG file newly created in Lightroom, it seems that it should look like, with the removed noise/grain.  It seems the noisey/grainy in Photoshop.

  I hope someone can tell me what is happening and how to solve this problem.

  Thanks in advance for any help.

  To make a valid comparison, don't forget to look at the pictures from 1:1 (100%).

  Any other point of view is inaccurate and misleading, picture time putting in the scale/resampling.

  If the photos are more granular in Photoshop when seen at 100%, check that Cache levels on at least 4 in Preferences > performance.

• Lightroom works very slow all of a sudden

  I searched and read all the forums on the optimization of the performance of Lightroom (How to improve and accelerate the performance of Photoshop Lightroom) and have watched many videos with tips on improving the performance on YouTube and have not yet found a solution.

  Question: After a few months of using Lightroom, it suddenly became unusably slow. It was not a demonstration of deliberate for its slow over time. Instead, one day it was usable, and the next day he was not. Even in the library module it lags to switch between images. When I press F for full screen, where it was instantaneous and now takes about 10 seconds and is then stuck in fullscreen. This is true for the large images and old photos of iPhone even in low resolution. Can import is no longer the same wait more than a minute between clicks.

  On my computer

  • 2015 Macbook Pro (a few months)
  • OS X El Capitan 10.11.2 running
  • Intel Core i5 at 2.7 GHz
  • Memory - 8 GB 1867 MHz DDR3
  • Graphics - Intel Graphics Iris 6100 1536 MB
  • Hard total is 120 GB
  • Drive hard use 96 GB of the - 47 in photos and approximately 22 GB in "others" which I suppose is a majority of the Lightroom data
  • I almost exclusively use this machine for browsing the web and photography. Nothing else. very few other programs and file type

  On my Lightroom

  • Lightroom CC
  • 2015.2.1 release
  • 5 864 total photos on the computer and my main Lightroom Catalog
  • Only about 60 have changed considerably in the develop module
  • Majority taken on a JPEG of A6000 Sony 24MP camera

  What I tried to solve the problems, does not

  1. Read a lot on the size of the catalog. Mine is still quite small, but I've tried closing the catalog and begin a new one with about 200 shots straight out of the camera. This has not solved the problem.
  2. Optimized catalog
  3. Preferences changed to automatically reject 1:1 previews after a day.
  4. Top left says nothing about the rendering preview. This along with the fact that the issue has been sudden leads me to believe that "Preview size" are not the issue, but I could be wrong.
  5. I tried to move all my photos on an external hard drive fast - catalog file was still on my computer, but I had a lot more space on the machine. This has not solved the problem
  6. I turned off of face detection, because he had tried to distinguish faces
  7. Increased raw cache size of camera

  Lightroom isi the only app I had problems with. Everything else is zippy and smooth. Help, please!

  Hi robertr,.

  • Lightroom CC
  • 2015.2.1 release

  The first suggestion would be to upgrade your Lightroom to the latest version 2015.3. Select Help<>.

  See the maintenance of Lightroom

  Let us know if that helps.

  Kind regards

  Assani

• Lightroom became very unresponsive. How can I reinstall it if I do not buy a disc?

  I'm running it on a new yosemite air macbook, and I restarted the mac and the program several times it did not difference. It was working fine but now it's the only piece of software I have a problem with. It is very slow and unresponsive or crashes. Is the solution resettlement? I bought the software as a download rather than the disc, then how do about it?

  Thank you very much in advance for any advice

  Reinstall does not help. Try this: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/ it's a bit easier to follow than instructions for Adobe.

• Images in lightroom are VERY DARK in the library? Help, please...

  I have been using Lightroom for a while now and have had no problems.  I recently opened lightroom and all images in the library are now extremely dark and contrasty (I did not any changes).
  
  When I open the RAW files in PS or bridge etc they look very well and when I export images from lightroom as JPG they are very good, it seems like it comes from the way in which images are displayed in Lightroom.
  
  What am I I am doing wrong and how can I solve this problem?
  
  Your help is very appreciated.
  
  Thank you

  Since you're under XP: right click on the desktop and open the display settings, color management and see which profile is loaded. If you have an Nvidia card, you will only be able to load a profile for two monitors. If not calibrated manually it should list sRGB as the default profile. If this isn't the case, set the sRGB as the default until you re - calibrate manually.

  You have not to calibrate your screen, you did? You should really get a Sypder - or any other device appropriate to your choice - and calibrate your screen.

• Satellite Pro 4600 very unstable and BSOD

  Hello

  I have a Satellite Pro 4600 c750/128 with xp installed.
  It was ok, but slow, so I've updated at 500 MB of memory.

  He now became unstable under windows and throw a screen blue after awhile, which is a related, but firm and we will restart until I have a chance to read the error message.

  I tested the new memory from one day to the next with memtest and run 4 passes all tests without error, about 9 hours of operation (on the back).

  The event log indicates a discharge, but this does not mean a lot to me.
  The event log has an error during startup, what was there before the memory upgrade.
  Googling Sugest a fix to update the bios, it's always available for this laptop bios?

  The BIOS should be available for this former Satellite Pro 4600.
  The BIOS and drivers must be placed on the page of European driver of Toshiba.
  Here, you will need to search the Archives!

  But I doubt that the error is caused by the BIOS.
  Is the laptop ran stable also with the previous BIOS and it foolish to update the BIOS to fix this problem.
  I'm sure it won't change anything!

  Upgrade the RAM and BSOD appears now.
  I think that the problem is related to the RAM, even if the ram test didn't find any errors
  The RAM may be not compatible also if no error has been detected.

  I recommend that you test the laptop without the new RAM and check if the BSOD will appear again.

• 13 9350 XPS - SSD USB C 3.1 - very unstable/no usable

  A few weeks ago, I got a laptop XPS 13. And it's a great machine.

  With the exception of a problem.

  I have a PNY 128 GB SSD connected to an interface of Startech USB 3.1 with a USB type C connector.

  When I plug it in, the system maintains the recognize and then not recognized it, infinity ad. Windows fires each time. The drive is unusable. Note that we open via USB 3, this works very well.

  I installed all the drivers a BIOS (1.4.3) updates and the latest updates of Windows 10. Note that I installed the driver of e/s series of Dell, but whenever I come back to see if there are more drivers, the IO series driver needs to update again. It seems to never take.

  Notice that before the 10 windows updates, it was more stable.

  Also if I boot to the safe is seems a lot better.

  I have very little installed on the system. Only things Microsoft (office 365, OneDrive). This is a new installation.

  Derek

  I had a problem similar to this with my Dell USB - C to mini adapter HDMI/VGA/Ethernet/USB3.1. I called Dell and after 2 hours, they were able to fix. Apparently (don't ask me why) the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks. Apparently Intel is aware of this problem and institute a fix in the next update of driver for the XPS13 which is supposed to reach the end of the summer.

  I hope it works for you.

  The update of the IO series driver who seems to never stop smoking is also another question, I noticed. I don't worry about this. I have as well, and the Serial i/o driver version is the most recent driver. It's like there is a bug when it scans the computer for driver updates.

• Very unstable with ESXi 5.5u2 stock - custom iso R610 would help?

  Decided to upgrade our u2 ESXi 5.1 to 5.5 on our R610:s to get the new hotness and made it the same way I have installed along - just caught the last ISO from Vmware. It worked very well with 4.1 and 5.1; systems have been solid as a rock for years.

  U2 5.5 however has serious problems iSCSI and the stroke of a few machines, drop the iSCSI connections, or both, this is ate one of my virtual machines. Fortunately for backups.

  I didn't while grabbing ISO custom here, but these extremely boring stability problems it solves? I've tried both using iSCSI (how it should be set up initially with 4.1 to get frames) and now with built in hardware Broadcom NIC, but the moment where you put strong pressure on the iSCSI storage begins to fall and causing the catastrophic with the cluster-wide problems.

  In the process of cleaning, I applied the latest firmware patches, BIOS is now 6.4.0, I think it is.

  Kimmoj,

  The probable cause is due to the version of VMware. The Dell custom ESXi version uses specific drivers for Dell servers, where the VMware version does not. It is therefore much more likely that the version of Dell will run more smooth and more stable, the drivers being designed. You can find version 5.5 U2 here.

  Let me know if it helps.