Lightroom zoom when you work in the print window

Similar Questions

• disable the words to guess when you type in the search window

  How to disable words to guess when you type in the search window

  https://support.Mozilla.com/en-us/KB/search+bar

  See - search suggestions at the bottom of this support article.

• Default zoom when you click on the image

  Hello.

  I just started using LR5 on a Macbook. Before that, I used an Imac and various, computer desktops and laptops.

  I was never interested to the configuration of the zoom levels because I never needed too. Good post, and when the image has been enabled, it zoomed.

  On my Macbook, the zoom level is medium-low when I click. I don't know if it's just a feeling because of the smaller screen, but I feel like it's zoomed in much less that I'm used to. I searched a lot on the internet everything I do and responses (through the browser or the view menu) it never registers the parameter. It seems that what I want is an image made according to standart and a 2:1 zoom when I click on the image.

  How can I make LR keep this configuration? It is very annoying to have to change that, whenever I start LR5.

  Thank you.

  I re-read your original post. You want that stick through a fence of Lightroom and reopen? Lol there is not a way to do it. The zoom settings are dependent on session.  You can bop around LR everything that you want, and they will stick through the session but when you exit the program adjustment and 1:1 are restored.

• First CC crashes when you work with the finder

  Hello first community

  my CC always freezes when I want to work with the finder. It starts when you select the disk from scratch or save "save under"-(see photos)

  New installation and upgrades I did several times. I am at a loss. You have a solution? I have the problem only with the first.

  Thank you

  Robert

  

  

  I have the solution... Disable the Plugin Finder Dropbox...

  

• A blue screen when you work with the computer and not during inactivity TOP: 0x0000007A (0xFFFFFFFFC000000E, 0x000000004D393884, 0xFFFFF6FB40000108, 0xFFFFF68000021000)

  Hi, computer my mom sometimes stops during work or simple browsing the internet on youtube, Skype, etc.

  The error string is:

  STOP: 0X0000007A (0XFFFFFFFFC000000E, 0X000000004D393884, 0XFFFFF6FB40000108, 0XFFFFF68000021000)

  Physical memory dump FAILED with status 0xC0000010

  Not really sure what to do

  I went in cmd, CHKDSK came and it was planned for the next boot. However, he has taken that a few seconds for the start and has not really accomplish something. I'm used to a 3-5 minute long CHKDSK process.

  Any help is appreciated.

  Kind regards

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  
  

  If you use the blue screen view, which has crashed, or a similar application, don't.  They are wrong at least as often they are correct

• Records duplicated when you work with the file history

  I look at the file history.
  I wonder what happens if you have a folder contained in the two favourites and libraries. Things get backed up twice or is smart enough history to only backup files?

  For example: I have a user named Woody, and of course Woody has a documents folder.  For convenience in obtaining these records quickly one can be in the Favorites and the other in libraries.  Because Woody the folder called documents I wonder if the history of the files will save this directory twice?

  Thank you

  You can remove duplicates of files and documents. Perform the following steps to change the settings.

  (a) press the Windows key and the X key.
  (b) select Control Panel . Click Show all.
  (c) click file transfer. Click Settings in advance .
  (d) select the desired option in keep recorded versions in the menu drop-down.

  You can clean or remove the previous version as well. On the same page as mentioned above, click clean Versions. Select the appropriate option and delete the rest.

  If you are still unable to work with her, I suggest you try the option of recovering files of Windows 7 available in the Panel. However, steps above should solve your problem.

• 4710 HP Probook s VQ494EA cpu is at 100% and extremely slow when you work with the AC adapter / CC

  
  

  With a new a power supply, the problem has been resolved.
  
  It's amazing, but it is the adapter!

  Marco

• My queue says there 1 document sitting in it, but when you look at the queue there is nothing there

  I can not print anything because the print queue think there is something stuck in there, but there isn't. The small printer icon appears at the bottom of my screen showing the existence of an item in the print queue. When you actually open the print queue to the top, there's nothing there. I tried to stop the printer spooler and restart it but that has not worked. I use a HP Photosmart C5180 series. If anyone has any ideas how to help me I would appreciate it a lot. Thank you

  Hi Julie,.

  The operating system you have installed on the computer?

  See the articles:

  Unable to print? Print jobs are stuck in the print queue

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02205477

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: Please select the operating system in the right corner and solve the problem.

  Let us know if you have other questions about Windows in the future.

• I use windows 10 on pc. Creative cloud must update. He gets 2% and keep saying "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom will not wor

  I use windows 10 on pc. Creative cloud must update. He arrived at 2% and stops, saying: "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom do not work for me right now.

  Close applications or contradictory processes

  Solve the problems of downloading and installation of Adobe Creative Cloud

  Mylenium

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  Can be caused by an add-on to the AVG.

  When find you what is causing that, please let us know. It might help others who have this problem.

• I can't open my email on Firefox, it works on explore. When you go to the page I get this message "the requested URL /hunter/ajax_login/redirect.php was not found on this server."

  Question
  I can't open my email on Firefox, it works on explore. When you go to the page I get this e message "the requested URL /hunter/ajax_login/redirect.php is not found on this server."

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.