Limit distortion in Photoshop?
I'm trying to stitch a panorama composed of about 60 images. I expect to try the new Adobe's Warp limit feature, but unfortunately the pano size is too big for Lightroom or Camera RAW to manage. I managed to get the images stitched by sending to Photoshop, but it doesn't seem to be a way to use Warp to limit at this stage.
Is it possible to stitch a panorama of the 'traditional' way in Photoshop, which gives a stitched image composed of several layers of photo - and continue to use limit Warp?
Thank you!
Brad
Hi HoltArts,
Now I do not think that there will be an option in Photoshop, you have this traditional updates page you can select merging images such as Auto, Perspective, cylindrical
Create a panoramic photo in Adobe Photoshop | Adobe Photoshop CC tutorials.
Kind regards
~ Mohit
Tags: Photoshop
Similar Questions
-
A proposal for the improvement of "Correct camera distortion."
The smoothing tool is very simple - you simply draw a line following the horizon and straightens the image. It would be nice if you could do the same along a vertical line, but you can always rotate the image 90 degrees first.
But when the distortion of the camera for tilt and rotation correction, it is much heavier. It takes a while to get all the verticals vertical. Now if he could just mark two lines that should be vertical, the program could easily make the adjustment automatically.
Of course, this isn't really a question to the community. I hope that Adobe people read and answer this question, but I can't find a way to communicate directly with the developers.
What version of photoshop elements and the operating system are you using?
I just installed version 13 and tried to update to 13.1 failed. I use Windows 8.1.
You can make a vertical smoothing with the tool right in the PES Editor
To align vertically, click the starting point, hold down the CTRL (command on Mac) and drag to represent the new straight vertical line.
https://helpx.Adobe.com/Photoshop-elements/using/cropping.html
Nice. I didn't know that.
Here's the undocumented keyboard shortcuts good camera distortion in photoshop elements
In the correct camera distortion dialog box, you can display a grid and move the grid by pressing the M key and dragging on the grid
I knew that.
You can get the straighten tool by pressing A and then you either draw a vertical or horizontal line to straighten
Good.
You can press the D key to obtain the remove distortion tool and drag on the image
(even by moving the slider of distortion delete)
But you have not addressed the point I was making. In most of my photos, I need to set the angle and the vertical distortion for the vertical lines to be vertical. And I want them to be precisely vertical. This involves a lot of steps in fine tuning. As I said, if I scored just two lines that need to be vertical, with a simple geometry program could perform this operation automatically.
-
I would like to help setting a photo of her look "ball".
Filter > Correction of the lens.
If you Google "how to fix the ball in photoshop" you will get more help there to.
The 'how to' words at the beginning of a Google search are like gold. Some of the success that I got:
http://www.OCModShop.com/how-to-correct-lens-distortion-in-Photoshop/
-
How distort/bow text?
Hello
I need to change the point of view of the text on my document displays to make it look like a page lying on a desk, the top of the smaller page (which gives the impresion that it's further) to match the book I already distorted in photoshop. If you could tell me how to do this with images as well that would be great, so I don't have to distort the image in photoshop before you place it in InDesign.
Many experts thank you!
Sophie
You can use the direct Selection (white arrow) tool to move each of the corners of the block of text, to get the shape you want, but it won't distort the text inside the frame which would happen with true perspective. You will have to go through line by line and manually adjust the font size and maybe even add varying amounts left and right tilt to individual characters to really get the full effect.
-
The objects are keeping their shape instead of be distorted
For some reason, my elliptical objects are keeping their shape, specifically in the glass filter in the menu of the distortion of Photoshop CS4. Same thing with any artistic or brush the filters of the race. The Interior of the shape is affected but it retains its circular/elliptical form. This only started happening this morning after the first time I started by Photoshop (as in this worked the first time, but after that he has not worked properly). Blending mode is normal, there is no selection. Any help would be very appreciated it's biting into my schedule.
glass filter does not support transparency, a layer containing a color unique ellipse (or any shape) surrounded by transparency would not change at all when you use the filter glass, you need pixels around it filled
-
How to correct lens distortions?
I remember seeing a video tutorial on fixing lens distortions, but I don't remember that video is and who made it. Can someone show me how to correct lens distortion in Photoshop CS4? I shot the photo with a Nikon widen Angel 24mm lens. The picture looks somewhat distorted. Any help is appreciated.
Filter > distortion > correction of the lens
http://help.Adobe.com/en_US/Photoshop/11.0/WSF65FB40F-00F5-445A-BD9A-38B3737A9A19a.html
-
Photoshop CS4 crashes when you use shift and the move tool
Help, please!
Whenever I click on a layer with the tool move while holding the shift key (so I can limit the movement), photoshop crashes. I get a message that says: "could not use the tool to travel because of a program error." And then photoshop just stop.
Now I can use the move tool without holding SHIFT, but as soon as I hit the shift button and tried together... crash!
What is going on?
I was wondering if it has something to do with an updated video driver I installed yesterday. He was not doing this before that.
Suggestions anyone? Please please please help!
Have you tried to roll back the driver to see if the fault disappears?
Alternatively, you can try to reset your preferences as described in the FAQ.
http://forums.Adobe.com/thread/375776?TSTART=0
You must physically delete (or rename) the preference files or, if you use the Alt, Ctrl, and shift, don't forget you get a confirmation dialog box.
This resets all settings in Photoshop default.
(A complete uninstall/reinstall will not affect preferences and a corrupted file may be the cause of the problem.)
-
the selection of an element's bounding box is missing
When you select any element, text or picture no limit box appears Photoshop cc2014
There used to work then all of a sudden. I have changed some default settings or...
the oldest cc of photoshop is very well...
What do you mean exactly?
With the tool selected is "Show transform controls" Toolbar Options checked?
-
Pls! Resize and then the edges are smoothed out. Why?
Hello!
I have an image that is bright, very precise edges. But when I move to another page and resize the edges become slightly clearer, only the last row of pixels from each edge. Pen is 0. Then... Someone is now what is happening?
Thank you!
.. Above: before and after to move and resize.
The opacity diluted on the edges is a side effect of Photoshop bicubic interpolation when downscaling, but not of upscaling. The interpolation algorithm samples pixels in a radius around a point in the source image to calculate a new image pixel. When the source image is sampled near its border, virtual source pixels are replace the nonexistent pixels outside the limit. In Photoshop, the virtual pixels are given an opacity of zero, so the pixels along the edge of the new picture have diluted opacity and edges look more soft than in the original.
You can resize with bilinear or nearest neighbour interpolation to prevent dilution opacity, but you can find unacceptable quality by other means. I have an Action that makes the partially opaque pixels to become completely opaque, but it has restricted the application due to the creation of irregular contours in the curves and lines in slope.
(Previously, an Adobe engineer indicated that cannot do anything about the problem because the result is inevitable because of the math, and that other users want to the dilution of the opacity to happen, in any case.) I pointed out that users might consider options for virtual pixels, such as the use of the nearest existing pixel-to-pixel non-existent this dilution of the opacity is prevented. The response has been silence. There are other software that gives the user options virtual pixel.)
-
Reached on Photoshop CS3 activation limit
Hello
I have a serial number for a 21 phtoshop CS3 Extended, but he says "Activation limit reached".
I intalled on any other computer, so I can't "disable."
By CAT, "customer" says me:
Verified this data serial key: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx is for: Photoshop CS3 Extended and as a product of CS3, for everything you must visit the support related forums: https://forums.Adobe.com/welcom
Can someone help me?
Thank you
Finally, I found a person who helped me. (seems to me that the Spaniards support works better than the overall)
The problem is that I have an extended version of Photoshop CS3, but I downloaded the 'normal' version from here: Dotownload Adobe Creative Suite 3 products . My fault.
Thank you for all your help
-
Images in Photoshop CC 2015 is distorted when opening
So I recently renewed my subscription Photoshop CC 2015 I received more design oriented responsibilities in my job. The task I have to do is to design a banner I did research on and managed to wrap your head around the problem to roll up.
The question I have now is that whenever I try to add an image (jpeg, pdf, etc.). The image is horribly distorted to the point that it is not usable. In addition, he shifts the rest of the layout and affect the coloring of text and other forms that I inserted.
I am sure that my laptop meets the system requirements and none of the files are corrupt or whatever it is.
Can anyone offer a suggestion as to what the migration question be? So far, I still try to reinstall the program from scratch, that's my next step, but I don't think it will solve.
Thanks in advance!
You push your CPU to its limits with 3 GB of Ram running image editing products. As you can see the document that you opened is 860 + Mb and your Ram is about 3000 MB.
Photoshop system requirements , it is recommended to have 8 GB of Ram for optimal performance. But that seems not to be the origin of the problem here, just a recommendation.
Have you changed the CMYK color space voluntarily? Try to change it to RGB and see if that helps.
~ Assani
-
I buy the Adobe Creative cloud and paid, but when I downloaded and set (photoshop CC), he still appeared "is the evaluation version and cross the date limit.
Hello
You can also see Cloud Creative applications back in test mode after an update until 2015 for CC
Hope that helps!
Kind regards
Sheena
-
Is there a limit to how many brushes you have in Photoshop CS5 Extended?
I want to download some brushes and I would like to know if there is a limit.
I doubt it. You can have a LOT of brush sets, and each set can contain a LOT of brushes. You would only take charge a little at a time.
This shows you the locations of the files (we do not know what operating system you use)
Preference file functions, names, places | Photoshop CS5
Note: if you are using Windows, you will need to make hidden files and folders visible to access the App Data path
I have a lot of files brush, and to make life easier, I rename them with meaningful names so that they appear in a logical order. I follow enough of the file name to identify the source of good.
The standard Photoshop help pages are usually better that most third-party guides,'ll find you on the web.
-
Suddenly any photo I'm trying pull up in photoshop is blurred or distorted
Suddenly any photo I'm trying pull up in photoshop is blurred or distorted... I pull up in other programs to display a preview of it and its fine... Help me
Press Ctrl or Cmd and + see if it changes.
-
CC of Photoshop smart sharpen problem distortion of line
Since I use the new CC in Photoshop, I have had no problem until this happened the other day. The image is pefectly cutting, added a shadow, flattened, change to CMYK for print mode.
I then did a smart sharpness of the amount: 100%, RADIUS: 1.0px, noise reduction: 10
and these very weak lines appeared in the image (see below)
PLEASE NOTE that I pulled a levels very hard to amplify the distortion type captured. The lines you see are infact very low but still noticebale in print. Can someone explain why this is happening?
Here are two screenshots, one right after the other with clicked on preview. I also work in 8 bit mode if that makes a difference
Thank you
Danny
Maybe it's a device driver or a hardware failure. Try disabling your GPU in Performance of Photoshop preferences. See if she fails when Photoshop does not use your GPU.
Maybe you are looking for
-
It is illegal to build your Hackintosh?
I really want to buy a Mac Pro, but it's too expensive. I heard that you can add your RAM and build a Mac computer or a Hackintosh, which acts as a Mac Pro but costs less than $3,000. Is this a violation?
-
Compaq WF1907v 19 inch LCD Monitor - unable to connect its cable!
HI - come to take delivery of a new "Compaq Presario SR5502UK PC + Compaq WF1907v 19 '' Widescreen Flat Panel Monitor", which is excellent. One small problem is that the monitor is VGA without no problem, connect to the PC by a cable but the audio ca
-
Unable to connect to cRIO (OK in MAX)
Hello I am exploiting my cRIO from a different computer than usual (after the usual hard drive has failed) and having connection problems. The two are running LabVIEW 2013 and Max I can see LabVIEW 13.0.0 in real-time as well as NOR-RIO 13.0 and NOR-
-
Elm 9.1 to 11.5 plm
Hello community of Cisco, can a stand-alone Version of the Enterprise License Manager: 9.1.2.11900 - 12 be upgraded directly to the main 11.5 License Manager by applying CiscoPrimeLM_64bitLnx_11.5.1.10000 - 5.sgn.iso via the UI Enterprise License Man
-
BlackBerry Smartphones BBM profile - misconfiguration
Greetings, I could use some help, I am new to Blackberry and smart phones in general. I was just trying to put up my BBM profile using my contacts list to select my details. And I screwed up when I used my fat finger and selected the wrong contact. S