limit internet access

Similar Questions

• Can I restrict or limit internet access on a farm in RDS?

  Location:
  -need to allow remote access to the farm of RDS Internet of remote sites (without VPN)
  -Sessions close require access to the intranet using IE (Dynamics CRM)
  -Some users do not use internet in a responsible manner (wasting time, inappropriate sites, etc.)
  -need ability to prevent browsing of the sessions

  I know that we could set up a proxy server (IAS or similar) at Headquarters but I can't handle this being rather long and frustrating for users (and so myself).  I have also no prior experience in the implementation or management of a proxy server (just to know that they can cache and filter web site traffic), so one for 300 active users on the portal management would be a problem.

  If I want to avoid using a proxy server at Headquarters can I do a GPO or something to prevent casual internet browsing from just the servers in the farm?  If we can allow access to specific sites (white list) which would be an interesting option, but not a condition in this regard.

  We review to implement a form of filtering on remote sites affected (using K9 agents on computers personal or similar) of the internet, so we should just remove the back door of the use of the farm to browse the internet and circumvent the once connected local filtering.

  Remote sites use stations XP and Win7, configured in mode working group.  Each site has 2 to 4 computers.  Remote sites share their internet access with computers not relating to staff, so we are reluctant to restrict internet access for all users on the site (using the subscription services provider of firewall for example).  There are more than 20 remote sites.

  The farm is built using the 2008r2sp1 server.  We have a RDS (also a dedicated redirector) gateway and 4 session host servers.

  Any ideas?

  Try asking in the Forums of Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Devices to file my EA6350 network daily 1-2, but internet access is maintained

  Devices on my network disappear every day. Internet access is maintained for computers, but I can't see the other devices on the network. Is there something I need to change in my settings? DHCP reservations affect this? The situation is very frustrating because I have to reset the router everytime I want to print something or access to the my web cam. Thanks in advance for any help. KF6YU

  I'm not sure of the term of the lease to No Limit. I suggest that make you reservation IP instead or contact the Linksys Support for assistance.

• Parental Controls + Internet Access Policy 'Add' is shaded on

  I need to add several new devices to my "target devices" in the Parental control-Internet access policy and program schedules that devices can get online. But my 'Add' is shaded out and I'm not allowed to add devices. I use the browser to log in to the router.

  To manage access to the Internet, you have two methods available, Parental control and Internet access policy. That a method can be used at a time. So my first question which option you are trying to use to block or plan the Internet access?

  As the Parental controls can restrict internet access for up to five computers or devices. You can block access to the internet or to limit it to specific times, and you can also block specific Web sites.

  So if you have several devices then 5 to add then you should use the political Internet access option.

• No Internet access after the connection of the cisco vpn client

  Hi Experts,

  Please check below config.the problem is vpn is connected but no internet access

  on the computer after the vpn connection

  ASA Version 8.0 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 192.168.10.10 255.255.255.0
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  IP 192.168.14.12 255.255.255.0
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
  INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
  55.240
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool testpool 192.168.14.240 - 192.168.14.250
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access INSIDE_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.14.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
  Crypto-map dynamic dyn1 1 set transform-set setFirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  password encrypted user testuser IqY6lTColo8VIF24 name
  username password khans X5bLOVudYKsK1JS / encrypted privilege 15
  tunnel-group mphone type remote access
  tunnel-group mphone General attributes
  address testpool pool
  tunnel-group ipsec-attributes mphone
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
  : end
  ciscoasa #.

  Hello

  Large.  Try adding the below to make it work

  vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

  NAT (inside) 0-list of access vpn-sheep

  Harish

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• How to create network without internet access

  I have three devices: air mac, mini ipad and iphone OS. but I can't access the internet.

  How can I create a network without internet access?

  Maybe I just need another router, but sometimes, I just take my mac and iphone. It is impossible to get the router with me everywhere.

• no internet access at el capitan

  Mac Pro with El Capitan. No Internet access with any browser, but I can access the Internet using the recovery system (this is what I now use to access the site of discussion). Already verify permissions and fix them with disk utility. Other Mac connected to the same router (Apple) can access the Internet without problem.

  It seems I have to re - install El Capitan. Fix?

  How you access the Internet? Wired or wireless? Do you have a good IP address? (Note that the one that starts with 169.254 is NOT good.) What about the access with something else outside of a browser, such as the Mail app? Other devices on your local network can access the Internet?

  Good luck.

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

  Hello

  I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

  I'm wired; but have wireless for other things (Kindle, etc..)

  When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

  Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

  ' Currently logged on:

  and just below it says: (to the right of the photo of the House) network 5

  and just below it says: internet access

  That's all it lists the wireless network connection with my name and the names of other connections in the district.

  My question:

  the name "network 5"?

  HP says it is my cable provider; my cable provider says it's at HP.

  This can be changed?

  Thank you!

  Hello Denise,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you have a problem with wireless networks.

  Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

  If you don't want the name of the connection to be listed under active connection, follow the steps.

  (1) open the "Control Panel".

  (2) select and open "network and sharing Center."

  (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

  4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

  Let me know if it helps.

  Have a great day!

• No internet access on Internet Explorer after upgrade Win8.1

  Hello

  yesterday, I downloaded windows 8.1 but now I have no internet access. When I click on internet explore that was on my normal desktop but I have access to internet on internet explore on the main front page, I can't really use that one, it's very tedious.

  I prefer to use internet in the normal way. Can anyone help?
  Thank you.

  Thread is marked as answered. Is everything OK now?
  I have too many machine with Win8.1 but I don't have this problem. It's okay that surface I use applications requiring internet connection works.

  You can test it with another browser like Chrome?

• Since the upgrade to 5.0, firefox wants internet access to update every day. Why?

  I have McAfee Antivirus Plus, and he tells me everyday since I've upgraded to 5.0 that firefox wants internet access for updating files. Before I upgraded, it didn't happen. What gives? Is - this legitimate, or something is weird going on here? Please notify.

  By default, Firefox is to automatically check for updates every 24 hours.

  • Disable automatic updates, if you wish (Options > advanced > update) and manually check whenever you want (help > about Firefox > check updates)
  • Activate the authorization in McAfee for daily check to occur without informing you (contact McAfree for instructions)
  • Change the frequency of the automatic update checking
    • type of topic: config in the URL/address bar and press the Enter key
    • If you see a cautionary, accept it (promise to be careful)
    • Filter = app.update.interval
    • the default value is 86400 (one day in a few seconds, it's 24 x 60 x 60)
    • Right click on the name of the option in the bottom panel, click on 'Edit', enter your new value, click OK, close the topic: config tab
    • The change may take effect immediately, or you may need to restart Firefox for the changes to take effect, I don't know who.

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Next-generation Java plug-in 1.6.0_21 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
         
     • See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
     • Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
     • Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
     • Java test: http://www.java.com/en/download/help/testvm.xml

• unidentified network - no internet access windows 7

  Hi, I have a pavilion dv6 - windows 7 Home premium. everything was working fine until recently, but since this morning my wireless connection is coming as 'public network' with an error message "schooner - no internet access network. its connected to the router as usual with strong signals and other wireless computers work fine. I have not change whatsoever on my laptop but now I tried all the solutions mentioned on the internet. reboot/uninstall-install the drivers / updated drivers/called HP support/safemode network but nothing has worked so far. I use AVG Anti-virus if it's important. other ideas would be very appreciated. and how can I change a public network at my home netowrk in this case?

  Thank you

  Hello

  It may be an idea to set up a static IP address to see if it will connect you.

  Open windows control panel and open network and sharing Center.  Click on change settings card and in the next window, right click on your wireless connection, and then select Properties.  Left click on Internet Protocol Version 4 (TCP/IPv4) to highlight (click on the wording and not with the beat box) and then click the properties button.  Click the radio button next to "use IP address, then enter the following values. following

  IP 192.168.1.110

  Subnet mask 255.255.255.0

  Default gateway 192.168.1.1

  In addition, assign the following DNS server address

  Preferred DNS 208.67.222.222 Server (these belong to OpenDNS)

  Auxiliary DNS 208.67.220.220 Server

  After entering these values, don't forget to click OK for each open window, before restarting the laptop.

  Kind regards

  DP - K

• Satellite NB10t-Arelatifs victory 8.1 - limited wifi, no internet access connection

  Hello

  so I have Windows of Satellite NB10t-a 8.1 with qualcomm atheros adapter ar956x and im getting connection is limited message, unidentified network, no internet access despite the full bars messsage.

  I have other laptops and computers that run windows 7 etc in the House connection very well.

  I tried pretty much everything that any help at all would be really appreciated.

  > I tried just about everything at all any help would be really appreciated
  and what have you tried exactly?

  Have you tried to update the driver Wlan?
  Have you tested the WLan in relation to other Wlan routers?
  Have you tested different channels WLan (1-11) and different standard WLan (802.11 A/B/G/N)
  Did you test the connection to the WiFi which is not encrypted?

• Equium P200 status 'connected' but not internet access.

  I have an Equium P200 and finds it difficult to connect to a wireless network.

  I have the wireless key and all the information is correct.
  Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
  I live with two other people who have access, but I can't access the internet.

  How can I change this?
  Thank you.

  Hello

  Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

  Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

  You can find this setting here:
  ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

  Also, check if your WLan encryption settings are right!