Limit of 250 items of research perspectives 2013 (2013 Exchange)

Similar Questions

• Configure applocker for block lync and perspectives 2013

  Im trying to block lync and perspectives 2013 by using applocker for users could not use it. I created the new rule path pointing to the right lync.exe and outlook.exe and refused all access to him apply the rules, leave the default rules remains the intact application identity, set to start automatically and started it and force the update of strategy by using gpupdate/force, tried to restart the entire computer but it doesn't seem to work as I could always run both programs. is that what I missed to do? Please help

  I think that you are an administrator. Your Question is suited to different forum, if you are a server administrator, you can ask your question here

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  It is a consumer forum

  Always take a look on this

  https://TechNet.Microsoft.com/en-us/library/dn771040.aspx?f=255&MSPPError=-2147217396

• 2013 Exchange setup/PS will fail because Exchange 2010 SP3 missing on the edge transport server... but SP3 is installed!

  I downloaded the new installer Exchage 2013 CU1 which should allow Installation of 2013 Exchange in an existing Exchange 2010 organization. But already Setup/PS the prerequisite check fails. He know that both my havn't 2010 SP3 Exchange Edge Transport server installed. But that's not true: SP3 is installed on both servers. How to Setup research version and why it might find old entries? And more importantly: How can I make sure that the Organization's Information contains the build good level of Edge Transport servers? I hope that exchanging 2013 in the end is not as Buggy and frustrating as this never ending "can not install because ' Business.

  Hi Golfinho,

  Thanks for the post.

  I would like the season you post your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrdeploy/threads

  I hope this helps.

• Failover of DAG 2013 Exchange in Outlook problem

  Hi guys,.

  I'm trying to configure DAG for the first time on Exchange 2013.  Here's what I did:
  -Installed Exchange 2013 std on two virtual machines

  -Set up a witness server

  -Created the DAG (server name, directory witness and he has assigned an IP address)

  -J' have set up my databases and added the copy of database

  -Checked DAG health Active confirmed and index as healthy state

  -Verification of databases is mounted

  Here's the problem I have...

  When I powerdown one of the exchange servers, after that the exchange server starts to close Outlook (2013), poster "folder updated XX: XX."  trying to connect.
  When I check the connection status in Outlook on the workstations, it shows the status of 'Connection' and after a few minutes (between 5 and 10), it finally connects and everything works fine.

  I tried researching this issue and that you have used the following command in the hope, would solve the problem, but it does not

  [PS] C:\>get-OutlookAnywhere | Set-OutlookAnywhere - InternalHostname mail.labtest.co.uk - InternalClientsRequireSsl $false

  My questions are:
  1. I guess that's not just that it takes more than 5 minutes for Outlook to connect when the failover of DAG?  What additional steps need to be checked to prevent this (as I thought that take seconds to scan more)

  2. If a witness server goes down / fail, does that mean that all Email clients will stop working (IE send/receive)

  If this is the case, is it possible to configure a failover of witness? or is it something that should be created in case of failure?

  Thanks a lot for any intervention in the present.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• 2013 Exchange on node 2 Win2K8 R2 Cluster installation

  Hi all

  I am looking at implementing a failover cluster of 2 nodes Win2k8 R2 with a quorum as a witness disk.

  Acquiring this heap, I would install Exchange 2013 to coexist with my current

  Exchange 2007 server.

  Is there someone there who could point me in the right direction the steps I must take to accomplish this task?

  I googled and all I can find in what concerns an informative video is on how this can be done for MS SQL databases.

  Kind regards

  KDS

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Exchange forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• 2013 Exchange / Outlook / Iphone problems

  Greetings.  I don't know where is the best place to post this, so I started here.

  I have a situation with a migration Exchange that some clients are unable to connect to it, and I can't find any reason for the failure.

  Details:

  Initially a Server 2008 / Exchange 2007 deployment, migrated to Server R2 2012 / 2013 of the Exchange.

  In and out basic mail flow works, as tested (SMTP) outside and internally with OWA.

  I started the test with the Ipad client, using the Protocol of Exchange and initially had some problems settings or permissions that I was

  able to solve so I could connect with my test device (first gen, IOS rev 5.1.1) and with another test device (2nd gen, IOS rev 7.x)

  as with exchange protocol with a Samsung Galaxy.  At this point, some of the features work, and others don't - even with

  all the parameters identical but for the user account.  I tried the trick with enabling journaling of the mobile device, but there is no connection

  connected to bad devices it appears, and some show not all the mobile device.  Some customers "just worked" after my changes, and

  others have worked after changing the domain in the configuration, and others have no joy at all.

  Next test passed to Outlook 2007 running on Windows XP.  Again, I had a few initial problems that seem to be linked to the

  SSL certificate, once I set up the CA for the domain and signed a cert for the exchange of use, these issues seem to clear up

  on _my_ customer.  Another user with the same configuration (XP + Outlook 2007) does not work.  If he clears his profile when he starts Outlook

  He walks through the creation of a new, immediately recognizes his identity and the server (from auto-discovery) and asks his password,

  but do not accept the password with any combination of user, * address email is removed from the privacy *, or * address email is removed from the privacy *.  This same user has a

  Win 7 + configuration Outlook 2013 which works very well.

  OWA has always worked and that's what inactive users are currently access, but they would like to their regular Outlook

  customer return and Ipad/Iphone users would be _really_ like this back like many of their contacts in their address book Exchange.

  I have searched with some keywords and phrases I could think of to describe, but it is just too hit and Miss, and did not

  Find all the good tracks.  Sometimes I find solutions that help a little but exacerbate another.

  Any light that can be paid would be useful, and I can give you any missing information that needs it.

  Dave

  Everything that affects server must be posted on Technet (where Server experts are

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• POS 6.0 DAG 2013 Exchange fails continuously

  Thanks for reading. To say I'm a little nervous that here would be an understatement. I worked on getting this thing deployed since Saturday. Whenever there is consistent failure. I have taken from the configuration and started from scratch, he continually fails.

  The last error I have is below.

  2015-06-16 14:53:18 Exchange_DAG - 1434491732837 WARNING < 0000 >: exit status no no [ctl_spawn] Workorder "Exchange_DAG-1434491732837" ' 536870919 code: various error '

  I found the article to support, but it does nothing. VMware KB: backups Exchange DAG fails in VMware vSphere Data Protection

  The ports are open on the MS Server 2008 R2 servers. I have zero problem with this. There is nothing between the two servers that can stop them except the ESXi host. It is on the same subnet too so it's not like there issues play with it. One thing I notice, for any reason, the Cluster DAG that is created seems to be losing the IP address that has been provided, I do not understand how it is possible. When I go back to check the configuration, it shows the address IP is 0.0.0.0. but when I go through some of the files I see 10.10.20.0. I'd be 10.10.20.159. Now, the really good part is that if I restart the POS device, it stop trying to save completely. It's like he forgets the whole thing never existed. This is beyond frustrating...

  If it has never worked before, I would start by confirming the exchange of VDP requirements and Setup with the VDP Administrator's guide.

  http://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/VMware-data-protection-Administration-Guide-60.PDF

  -If this OPTION is enabled, confirm that you have run the msiexec /i command during installation - Page 154

  -East .net framework 4 is installed? -page 165

  -I run the user setup utility backup Exchange and confirm the permissions are correct and the services run under the appropriate user. -page 168

  Other things to look at that are not clearly documented in the VDP Administrator's guide

  -I believe that POS 6.0 requires Exchange 2013 CU3 or newer

  -Try backup 1 node in the DAG.  You don't have to back up a DAG by using the backup DAG Federated configuration.  If you select 1 server to the DAG, as if it were a single server, it will still work and be easier to troubleshoot.

  Good luck.  Alternatively, you can try to open a ticket with the help of VMWare.

• Verification of Rediness 2013 Exchange makes the crash esxi5.5

  Hello guys,.

  I just want to know if someone has tried also to test Exchange 2013 and gives my ESXi5.5 crash.

  DELL PowerEdge R410 16 GB RAM 300 GB x 3 HARD drive with Intel Xeon [email protected] with VMware vmvisor ESXi5.5 installed

  Guest operating system

  1 PDC - R2 Windows Server 2012

  2 EXCH - R2 Windows Server 2012

  Creation of the guest operating system is not questions but after installation of Exchange Server 2013 preparedness control makes the crash ESXi5.5 I do not know why on ESXi5.5 makes a problem

  but I have also created an environment using VMware Workstation 10.0.1 and no problems, I was able to install exchange successfully.

  Any idea... what could be the cause of crashing on the exsi5.5?

  Any suggestions will help and appreciated.

  Currently, I reformatted my DELL R410 and erase all data on the HARD drive. and start working on it again...

  Thanking for all,.

  Andro Ruan

  What type of virtual NETWORK card do you use for your 2012 R2 VM? E1000 and E1000e by chance?

  Check the VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx

  Duco

• Microsoft Server Essentials 2012 and 2013 Exchange

  Hello

  Customer a Microsoft Small Business SERVER 2003. We intend to upgrade.

  Only 20 users using Exchange 2003, SQL express and storage network to access shared files.

  Can I install Essentials and Exchange on the same server or do I need to separate the 2 servers, 1 with an operating system and 1 with Exchange?

  If I do not need server 2 I have to buy 2 Essentials operating systems?

  Help, please.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• correct the error 10 - 2013 Exchange

  Error:

  There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the target site mhcden - ex01p.milehi.local

  Outlook cannot connect to the proxy server. (Error code 10)

  Hi Doug,.

  Thanks for posting your queries in the Microsoft Community.

  Please to inform these queries are handled by another forum that can help you better.

  Please post your concern there and get that resolved.

  https://social.technet.Microsoft.com/forums/en-us/home?category=ExchangeServer&filter=AllTypes&sort=lastpostdesc

  In the case of all other issues, please contact us, we are happy to help you.

• How can I set the limit of items per page on a web application / (paging).

  I need this for pagination.

  I learned that, by example, if I put the cut-off point at 10, paging will automatically appear once I get to 11 points.

  The problem is that I do not know how the limit of benefit per page on a web app thanks.

  When you insert the module into the page, you can specify the number of items,

  {module_webapps, ID, filter, itemID, notUsed, targetFrame, useBackup, resultsPerPage, hideEmptyMes wise, rowLength, sort}

  resultsPerPage - total number of items per page before using paging (limit of 500 items per page)

  http://KB.worldsecuresystems.com/134/bc_1345.html?BC-partner#main_Web_App_Modules

  Sanjit

• Y at - it somewhere I can find a list of items that is supposed to be running in activity monitor and those that should raise red flags?  I know the list varies depending on the applications and installed process but a base line would be nice

  Y at - it somewhere that I can find a list of explanations or definitions of applications that are running in the monitor of activity as well as a list of items that should raise red flags?  I realize account from the list will vary depending on the applications and programs installed and running, but it would be nice to have a base line of what should be expected and considered safe or normal.  There are too many items to research and one at a time.

  No, not so much.

  You have a problem you're trying to solve?

• Backup server AnyConnect when Session limit reach

  Hello

  I did the usual search engine and forum crawl looking for the answer, but can't find anything definitive.

  Is it possible for AnyConnect use the backup server defined in the connection profile when the session limit is reached on a SAA?  Basically if I hit the limit of 250 on my ASA 5510 in zone A, it will try the backup server that ASA is defined in the connection profile which is in region B?

  What I've read, the backup server comes into play when the AnyConnect client cannot connect, but in this scenario, it will connect but get an error message.

  Any input appreciated.

  See you soon,.

  Andrew

  Unfortunately, I think that the answer is no unless she changed in recent versions.  I asked this of Cisco for more than a year.  We have the same problem... when anyconnect hits a bridge but cannot connect because of all sorts of reasons, no IP address remains in the IP local pool, no licenses, failure DAP, etc., he never tries gateways following in the list.  It is ONLY when the door is completely unavailable will continue to backup from the list.  I hope more people chime for Cisco can finally fix this.

• Liquid and &gt; 500 items of the Web App

  We have a customer with more than 1000 Articles of web application. I realize that there is a limit of 500 items in cash, according to the regulations of the province of British Colombia. Is there a way around this, or to process the items then 500? I knew there was something with module_data, but I know that apply to the webapps at this stage. Any suggestions?

  No, not yet. Asked the team of British Colombia directly, here... Nothing yet on this.

• How to delete items hidden around the visible area of PDF?

  is there a way to remove easily abject (images, text...) around the visible area of PDF? See here: http://screencast.com/t/TCUMZENn4Nj as you can see in the screenshot above, are not only the extra images (its different forms and sizes at random pages) using the space and make the file more big, its not either allow me to focus a "Draft" watermark when I try to place it in the middle of the visible area. I tried to use the 'Optimize PDF' feature and checked all the option "throw objects', 'Clean Up' and ' ignore data user" but who has not actually removed something around the visible area of PDF. Does anyone have ideas of how essentially from crop everything outside the visible page?

  
  

  EDIT:

  BTW, I know that there is an option I can unckeck and the watermark will be focused: "Keep position and size of the constant of the watermark text when printing on different page size", however, is not a good idea, because 1) in the definition of the opacity of the watermark less than 100%, black becomes opaque 2) objects around the visible area still take place and increase the size of the file.

  There is a fixed upstream - "Delete page objects that are completely out of the box trim" which should work, but isn't here. (Probably because the limit of some items that happens in headliner area)