POS 6.0 DAG 2013 Exchange fails continuously

Similar Questions

• Failover of DAG 2013 Exchange in Outlook problem

  Hi guys,.

  I'm trying to configure DAG for the first time on Exchange 2013.  Here's what I did:
  -Installed Exchange 2013 std on two virtual machines

  -Set up a witness server

  -Created the DAG (server name, directory witness and he has assigned an IP address)

  -J' have set up my databases and added the copy of database

  -Checked DAG health Active confirmed and index as healthy state

  -Verification of databases is mounted

  Here's the problem I have...

  When I powerdown one of the exchange servers, after that the exchange server starts to close Outlook (2013), poster "folder updated XX: XX."  trying to connect.
  When I check the connection status in Outlook on the workstations, it shows the status of 'Connection' and after a few minutes (between 5 and 10), it finally connects and everything works fine.

  I tried researching this issue and that you have used the following command in the hope, would solve the problem, but it does not

  [PS] C:\>get-OutlookAnywhere | Set-OutlookAnywhere - InternalHostname mail.labtest.co.uk - InternalClientsRequireSsl $false

  My questions are:
  1. I guess that's not just that it takes more than 5 minutes for Outlook to connect when the failover of DAG?  What additional steps need to be checked to prevent this (as I thought that take seconds to scan more)

  2. If a witness server goes down / fail, does that mean that all Email clients will stop working (IE send/receive)

  If this is the case, is it possible to configure a failover of witness? or is it something that should be created in case of failure?

  Thanks a lot for any intervention in the present.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• 2013 Exchange setup/PS will fail because Exchange 2010 SP3 missing on the edge transport server... but SP3 is installed!

  I downloaded the new installer Exchage 2013 CU1 which should allow Installation of 2013 Exchange in an existing Exchange 2010 organization. But already Setup/PS the prerequisite check fails. He know that both my havn't 2010 SP3 Exchange Edge Transport server installed. But that's not true: SP3 is installed on both servers. How to Setup research version and why it might find old entries? And more importantly: How can I make sure that the Organization's Information contains the build good level of Edge Transport servers? I hope that exchanging 2013 in the end is not as Buggy and frustrating as this never ending "can not install because ' Business.

  Hi Golfinho,

  Thanks for the post.

  I would like the season you post your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrdeploy/threads

  I hope this helps.

• Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Hello

  Please specify the circumstances in which dictation is a failure.

  For example, what are you doing and what message error you see?

• My installation of Windows 8 via Boot Camp fails continuously

  I use a MacBook Air, early 2015, 13 inches. I am looking to re - install Windows 8.1 on a Windows via Boot Camp partition.  I have already completed this process with success, however, this time I have continue to spread the message that Windows Setup has failed.  No error number is included.  Boot Camp then cancels the partition that it has already completed and the process ends.  Do you have suggestions as to how I can get this installation to work?

  Can you boot Mac OSX Safe mode - try safe mode if your Mac does not commissioning - Apple support - and then start normally and restart the wizard of BC?

• 2013 Exchange on node 2 Win2K8 R2 Cluster installation

  Hi all

  I am looking at implementing a failover cluster of 2 nodes Win2k8 R2 with a quorum as a witness disk.

  Acquiring this heap, I would install Exchange 2013 to coexist with my current

  Exchange 2007 server.

  Is there someone there who could point me in the right direction the steps I must take to accomplish this task?

  I googled and all I can find in what concerns an informative video is on how this can be done for MS SQL databases.

  Kind regards

  KDS

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Exchange forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• 2013 Exchange / Outlook / Iphone problems

  Greetings.  I don't know where is the best place to post this, so I started here.

  I have a situation with a migration Exchange that some clients are unable to connect to it, and I can't find any reason for the failure.

  Details:

  Initially a Server 2008 / Exchange 2007 deployment, migrated to Server R2 2012 / 2013 of the Exchange.

  In and out basic mail flow works, as tested (SMTP) outside and internally with OWA.

  I started the test with the Ipad client, using the Protocol of Exchange and initially had some problems settings or permissions that I was

  able to solve so I could connect with my test device (first gen, IOS rev 5.1.1) and with another test device (2nd gen, IOS rev 7.x)

  as with exchange protocol with a Samsung Galaxy.  At this point, some of the features work, and others don't - even with

  all the parameters identical but for the user account.  I tried the trick with enabling journaling of the mobile device, but there is no connection

  connected to bad devices it appears, and some show not all the mobile device.  Some customers "just worked" after my changes, and

  others have worked after changing the domain in the configuration, and others have no joy at all.

  Next test passed to Outlook 2007 running on Windows XP.  Again, I had a few initial problems that seem to be linked to the

  SSL certificate, once I set up the CA for the domain and signed a cert for the exchange of use, these issues seem to clear up

  on _my_ customer.  Another user with the same configuration (XP + Outlook 2007) does not work.  If he clears his profile when he starts Outlook

  He walks through the creation of a new, immediately recognizes his identity and the server (from auto-discovery) and asks his password,

  but do not accept the password with any combination of user, * address email is removed from the privacy *, or * address email is removed from the privacy *.  This same user has a

  Win 7 + configuration Outlook 2013 which works very well.

  OWA has always worked and that's what inactive users are currently access, but they would like to their regular Outlook

  customer return and Ipad/Iphone users would be _really_ like this back like many of their contacts in their address book Exchange.

  I have searched with some keywords and phrases I could think of to describe, but it is just too hit and Miss, and did not

  Find all the good tracks.  Sometimes I find solutions that help a little but exacerbate another.

  Any light that can be paid would be useful, and I can give you any missing information that needs it.

  Dave

  Everything that affects server must be posted on Technet (where Server experts are

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 800b0100 on update for windows mail__update fails continually - tool is system strengthened

  800 b 0100 on update for windows mail
  Update continually fails - can find system uptime tool

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• 3 MS Windows & Security Office updates fail continuously as well as Acrobat & Apple QuickTime - arrrgh!

  These updates (KB978380, KB978382 & KB979895) repeatedly failed to install after being downloaded automatically. I have also manually download these updates from the MS site, stored in the computer and tried to install without success. I have to disable the Windows Firewall and the McAfee? Please note that downloaded from the Acrobat Reader from Adobe and Apple QuickTime updates failed to install.

  Coincidentally, I just discovered whild in the Admin account that Word now does not save my docs - wonder if I should restore to an earlier point?

  Why does this continue to happen (as it has in the past)? ! I don't have a lot of computer savvy, but after reading the comments of others, I am very frustrated and confused with MS Vista.

  craigcycle,
  I think that you run some aggressive scans on your system for infections malware\virus.  The fact that you get into any trouble with the Windows updates as well as 3 updates (Apple and Adobe) party leads us to a problem that is more then just a Windows Update issue.  You do not mention 2 firewall running.  You must disable one of them, because the firewall programs may conflict with each other and cause problems.  Here are some links with useful information about the protection malware\virus.
  Get rid of malware

  Can I clean an already infected computer?

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Limit of 250 items of research perspectives 2013 (2013 Exchange)

  Hello

  I have a problem with Outlook 2013 in our Citrix environment. If I use the instant search in outlook, I get only 250 items. First time that I get on the bottom "more...". ", but after clicking on the 'more', I still just 250 elements (there are more items to find in this folder).

  I changed the Option "To improve the search speed by limiting the number of results displayed" to take off the mark but it's the same (find only 250 items)

  Do you have any idea how I can disable this limit?

  Thank you and best regards

  Markus

  Hello

  Thanks for posting your question on the Microsoft Forum.

  Because you are using an Exchange Server e-mail account, it is better suited for the IT Pro TechNet public.

  Please post your question on the TechNet Forums

  http://social.technet.Microsoft.com/forums/en-us/home?category=ExchangeServer

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Visual Studio 2013 installation Failed packages - been trying for 2 days

  I spent over 2 solid days now trying all possible ways to install Visual Studio Premium to 2013 (update 2) without success, so it's time to post.

  Here's what I've tried:

  • Install the web installer - I get quickly "package not found" errors for one single package after another, and selecting the GET in internet option fails
  • Download and mount the iso - the same as before
  • You want to burn the ISO on a DVD, but more than 6 GB, it is too big.
  • With either of the above, tried pointing to the so-called lack of dll in the packages folder in the ISO image and that didn't work either.
  • Tried to apply certificates root in accordance with this article, even though I've never seen any messages during the installation of updates to the certificate.

  Other things of note:

  • I tried connected to my LAN to work as well as at home, in the case where there was a proxy issue with getting packages.
  • Last night, I was optimistic that a repair on the installation should work, because I did not "package not found" errors, and the Setup program ran the longest he has ever run, but in the end, he had a huge list of errors 'Package failed.
  • Each time, after that, Visual Studio 2013 appears is in "appwiz.cpl" list and I can actually run it, but I don't feel comfortable relying on it enough to uninstall VS 2012 with all the errors.
  • When I look in the list of packages failed, I noticed that many of them are actually installed programs already in appwiz, so I don't really know what is happening.

  Here's what looks like my most recent end-of-install window:

  

  Here is the complete list of defective packets of the window above. As I said, many are apparently already installed. If it's 2012 VS I who works, or if she really moving and package failed warning is bad, I don't know:

  • Microsoft SQL Server Transact-SQL ScriptDom 2012
  • Microsoft SQL Server 2012 T - SQSL the language Service
  • Windows azure SDK Services Mobile
  • Dev12 LocalESPC
  • LocalESPCui for en - us Dev12
  • Windows software development kit
  • Windows Software Development Kit DirectX x 64 remote control
  • Remote control Windows Software Development Kit DirectX x 64 (Yes, it is repeated)
  • Windows SDK for Windows Store applications
  • SDK for Windows Store Apps DirectX x 64 remote control
  • SDK for Windows Store Apps DirectX x 64 remote control
  • Certification Windows App Kit x 64
  • Windows App Certification native Kit components
  • Content Windows Runtime Intellisense - en - us
  • Microsoft SQL Server Express LocalDB 2012
  • Microsoft for SQL Server 2012 system CLR types
  • Microsoft for SQL Server 2012 (x 64) system CLR types
  • Microsoft SQL Server 2012 management objects
  • Microsoft SQL Server Management Objects (x 64) 2012
  • Workflow tools Manager 1.0 for Visual Studio
  • Microsoft Report Viewer add-on for Visual Studio 2013

  I can't believe that a software installation is this difficult. Such things should work. The one other thing I'll try is, since I have IE8 currently, which is the place of standard work, can I get IE11. I have not much hope that this will solve all my problems, but I'm out of ideas. The other thing is maybe uninstall VS2012 and all the countless things I guess got installed with who, although a) I don't want to lose the VS who works where I can't get a return and 2) I'm not sure which are standard for the Windows 7 system and who came with VS. The last option, as I said, is that, perhaps, all is well with VS2013, despite the warnings. I don't want 2 versions on because they take up a lot of space, but yet again, I hesitate to share a work perfectly VS2012 for a possibly buggy VS2013 if she is not everything he needs.

  Why is it so difficult?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Verification of Rediness 2013 Exchange makes the crash esxi5.5

  Hello guys,.

  I just want to know if someone has tried also to test Exchange 2013 and gives my ESXi5.5 crash.

  DELL PowerEdge R410 16 GB RAM 300 GB x 3 HARD drive with Intel Xeon [email protected] with VMware vmvisor ESXi5.5 installed

  Guest operating system

  1 PDC - R2 Windows Server 2012

  2 EXCH - R2 Windows Server 2012

  Creation of the guest operating system is not questions but after installation of Exchange Server 2013 preparedness control makes the crash ESXi5.5 I do not know why on ESXi5.5 makes a problem

  but I have also created an environment using VMware Workstation 10.0.1 and no problems, I was able to install exchange successfully.

  Any idea... what could be the cause of crashing on the exsi5.5?

  Any suggestions will help and appreciated.

  Currently, I reformatted my DELL R410 and erase all data on the HARD drive. and start working on it again...

  Thanking for all,.

  Andro Ruan

  What type of virtual NETWORK card do you use for your 2012 R2 VM? E1000 and E1000e by chance?

  Check the VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx

  Duco

• Microsoft Server Essentials 2012 and 2013 Exchange

  Hello

  Customer a Microsoft Small Business SERVER 2003. We intend to upgrade.

  Only 20 users using Exchange 2003, SQL express and storage network to access shared files.

  Can I install Essentials and Exchange on the same server or do I need to separate the 2 servers, 1 with an operating system and 1 with Exchange?

  If I do not need server 2 I have to buy 2 Essentials operating systems?

  Help, please.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 2 update install 3.1 but fails continually train

  When I tried to install turbo tax I kept getting erroe code 1601, who sends me to windows update to get the Installer 3.1 - but it fails everytime I try

  Hello
   
   
   
  List of error codes and error messages from Windows Installer treats
  http://support.Microsoft.com/kb/229683
   
   
  To resolve this problem, stop the service Windows install and then resave. This is so that the Windows Installer engine works correctly.
  To do this, follow these steps:
  a. Click Start and then click Run.
  (b) in the Open box, type msiexec /unregand then click OK.
  c. When this process is complete, click Start and then click Run.
  (d) in the Open box, type msiexec/regserver, and then click OK.
  Alternatively, you can download Windows Installer 3.1 from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely