limits of SQLite table?

Similar Questions

• No limitation regarding the table of bitmaps?

  I'm working on a game. Previously, I had 13 executives of sprite as separate files and used getBitmapResource to load into an array of bitmaps. It worked well.

  I've upped the number of sprite images to 26 and make them in a single bitmap file with 2 rows of 13 (corresponding to the States of game). I'm trying to load them into an array of Bitmaps - either one or two dimensions. None worked. The last loaded image is one that is displayed, regardless of what I call for. I use Bitmap.scaleInto, in OS5.

  My attempts at debugging continue to wonder if I'm violating a rule, with the berries of the Bitmap. Like, the berries can only work before because of the structure of the .png files? Bitmaps are already in an internal table format that blends in with my paintings?

  I can also have incorrectly implemented the scaleInto, although I'm working with the code for a very good post on this forum. Here is that code, currently configured to use a single dimension table. There are a few more from the referenced post lines, to maintain transparency in the sprite frames.

  class Thing extends OBJ
  {
   static Bitmap[] _mySprite; 
  
   Thing(int passX, int passY)
     {
      super(passX, passY);
  
      // Set bitmaps
  
      Bitmap multi_sprite = Bitmap.getBitmapResource("sprite_64x29.png");
      _mySprite = new Bitmap[26];
  
      Bitmap image = new Bitmap(Bitmap.ROWWISE_16BIT_COLOR, 64, 29);
      image.createAlpha(Bitmap.ALPHA_BITDEPTH_8BPP);
      for (int y = 0; y < 2; y++) {
          for (int x = 0; x < 13; x++) {
              int[] transparentImage = new int[64 * 29];
              image.setARGB(transparentImage, 0, 64, 0, 0, 64, 29);            multi_sprite.scaleInto(x*64, y*29, 64, 29, image, 0, 0, 64, 29, Bitmap.FILTER_LANCZOS);           _mySprite[x+13*y] = image;
             }
         }...
  

  Transparency works. And, if I shorten the loop values, the last loaded picture appears, regardless of what image I try to get out of the table.

  I know that I could skip the drawBitmap preload and only when needed. But I have a lot of code in place that expects to be able to check the dimensions of several bitmaps, in addition to these. And it seems just cleaner to shorten them.

  you re-use the image object, most likely, you end up with a table of the same objects (a table only refers to the object, it does not copy it).

• How do I get the geometric limits of a Table

  I searched the DOM and the forum and cannot find information on obtaining of the geometric boundaries of a table. How can I achieve this? Kurtis

  Hi Kurtis

  Get the width of tables and height and the horizontal and vertical it is containing the character set and you should be able to calculate offsets.

  Trevor

• Create a view which limits a large table, but also allows an outer join?

  Oracle 10.2.0.4

  CREATE TABLE MY_PAY_ITEMS

  (EMP VARCHAR2 (8) NOT NULL)

  , PAY_PRD VARCHAR2 (8) NOT NULL

  , KEY1 VARCHAR2 (8) NOT NULL

  , KEY2 VARCHAR2 (8) NOT NULL

  , LN_ITEM VARCHAR2 (4) NOT NULL

  , ITEM_AMT NUMBER (24.2) NOT NULL

  VARCHAR2 (100) FILL NON-NULL)

  INSERT INTO MY_PAY_ITEMS

  SELECT A.EMP

  B.PAY_PRD

  C.KEY1

  D.KEY2

  E.LN_ITEM

  F.ITEM_AMT

  , '                      '

  FROM (SELECT TO_CHAR (ROWNUM, ' 00000000') 'EMP' FROM DUAL CONNECT BY LEVEL < = 50) has

  , (SELECT '2010-' |) To_char(rowNum,'00') 'PAY_PRD' FROM DUAL CONNECT BY LEVEL < = 52) B

  , (SELECT TO_CHAR (ROWNUM, ' 000') 'KEY1' FROM DUAL CONNECT BY LEVEL < = 8) C

  , (SELECT TO_CHAR (ROWNUM, ' 000') 'Key2' FROM DUAL CONNECT BY LEVEL < = 5) D

  , (SELECT TO_CHAR(ROWNUM,'000') 'LN_ITEM' FROM DUAL CONNECT BY LEVEL < = 20) E

  (round (DBMS_RANDOM. VALUE * 400.2) "ITEM_AMT" of the double) F

  CREATE A UNIQUE INDEX MY_PAY_ITEMS ON MY_PAY_ITEMS (MEP, PAY_PRD, KEY1, KEY2, LN_ITEM)

  CREATE TABLE MY_ITEM_DISPLAY

  (THE VARCHAR2 (4) OF DISPLAY_CODE NOT NULL)

  , NUMBER (2) SEQUENCE NON-NULL

  , COLUMN_ITEM1 VARCHAR2 (4) not null

  , COLUMN_ITEM2 VARCHAR2 (4) not null

  , COLUMN_ITEM3 VARCHAR2 (4) not null

  COLUMN_ITEM4 VARCHAR2 (4) not null)

  INSERT INTO MY_ITEM_DISPLAY VALUES ('01 ', 10, '001', '003', '004',' 005');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('01 ', 20 '007', '013', '004',' 009');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('01', 30 ' 001', '004', '009',' 011');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('01', 40, '801 ', ' 304 ', 209',' 111');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('02 ', 10, '001', '003', '004',' 005');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('02 ', 20 '007', '013', '004',' 009');

  INSERT INTO MY_ITEM_DISPLAY VALUES ('02', 30 ' 001', '004', '009',' 011');

  MY_PAY_ITEMS is a table that stores line of payslip items.  It has a total area of 500,000,000 lines.

  PEM is the unique id, we have about 200,000 employees (with about 50,000 being active today).

  PAY_PRD is a weekly pointer (2010-01, 2010-02, 2010-52), we have the 2004 data and add a new pay period each week.  2010 01 is defined as the first Monday in 2010 for the first Sunday in 2010, etc.

  Key1 is an internal key, it follows the chronology in the pay period.

  KEY2 is a child of KEY1, there follows the sequence of events in KEY1.

  LN_ITEM is the component of actual compensation resulting from the event, on average, a person produces 20 lines per event.  Note that in this example, everyone gets the same LN_ITEM values, but in practice it is selected 20 of 300

  ITEM_AMT is the net salary per command line.

  FILLING is a set of fields that are unrelated to this issue, but act as a brake on the charges of the line.

  MY_ITEM_DISPLAY is an array that describes how some screens should display items.  The screen itself is a grid of 4 poles, with the content of each cell is defined as a LN_ITEMS search to retrieve the relevant LN_AMT.

  We have an application that receives a DISPLAY_CODE and an EMP.  It automatically creates an sql statement in the sense of

  SELECT * FROM MY_VIEW WHERE DISPLAY_CODE =: 1 AND EMP =: 2

  and returns the output to the user.

  My challenge is that I need to rewrite MY_VIEW as follows:

  (1) (select the relevant lines from MY_ITEM_DISPLAY where DISPLAY_CODE =: 1)

  (2) select the relevant all MY_PAY_ITEMS lines that meet the criteria

  (a) EMP =: 2

  (b) PAY_PRD = (a more recent for EMP and sysdate, so if he got last paid 2010-04, return 2010-04)

  (c) KEY1 = (highest key1 in EMP and PAY_PRD)

  (d) KEY2 = (highest key2 in KEY1, PAY_PRD and EMP)

  (3) I then need to cross reference to create tabular output

  (4) Finally, I have to return a 0 line where there is no LN_ITEMs (DISPLAY_CODE 01, 40 sequence contains possible values for this scenario)

  The following query is part of it (but not the PAY_PRD, KEY1, KEy2)

  Select * from)

  SELECT A.DISPLAY_CODE

  B.EMP

  A.SEQUENCE

  , MAX (DECODE (B.LN_ITEM, A.COLUMN_ITEM1, B.ITEM_AMT, 0)) 'COL1 '.

  , MAX (DECODE (B.LN_ITEM, A.COLUMN_ITEM2, B.ITEM_AMT, 0)) 'COL2 '.

  , MAX (DECODE (B.LN_ITEM, A.COLUMN_ITEM3, B.ITEM_AMT, 0)) 'COL3 '.

  , MAX (DECODE (B.LN_ITEM, A.COLUMN_ITEM4, B.ITEM_AMT, 0)) 'COL4 '.

  OF MY_ITEM_DISPLAY A, MY_PAY_ITEMS B

  WHERE B.PAY_PRD = ' 2010-03'

  GROUP OF A.DISPLAY_CODE, B.EMP, A.SEQUENCE)

  WHERE DISPLAY_CODE = '01'

  AND EMP = '0000011'

  SEQUENCE ORDER

  My questions

  (1) how I do PAY_PRD, KEY1, KEY2 forced, can I use a form any of ROW_NUMBER() FUNCTION?

  (2) how can I deal with the fact that none of the 4 LN_ITEMS column can exist (see sequence 40, none of these can exist)...  Ideally the SQL above should return

  01, 0000011, 10, < a digit - > < number > - < a digit - > < some number >

  01, 0000011, 20, < a digit - > < number > - < a digit - > < some number >

  01, 0000011, 30, < a number--> < number > - < number > - < number > -

  01, 0000011, 40, 0, 0, 0, 0

  I tried a UNION, but it prevented the view to eliminate most of the MY_PAY_ITEMS lines, because it solves ALL MY_PAY_ITEMS instead of simply retrieve lines for the EMP passed to the view.  The same seems to be true for outer joins.

  Hi Paula,

  It does not handle SEQNUM 40, it's just that your second set of test data did not SEQNUM 40. When I put in the first set of values MY_ITEM_DISPLAY, I get:

  DISP EMP SEQUENCE COL1 COL2 COL3 COL4

  ---- -------- ---------- ---------- ---------- ---------- ----------

  01 00000011 10 101.1 103.1 105.1 104.1

  01 00000011 20 107.1 113.1 104.1 109,1

  01 00000011 30 101.1 104.1 109.1 99.99

  01 00000011 40 0 0 0 0

  If this isn't the issue, you will need to explain the requirement of "outer join" and what you want more. Apart from his return nothing if there is absolutely no element of remuneration of the employee, this query will always return a line for each line MY_ITEM_DISPLAY for the display_code. If there is absolutely no data, no return line seems reasonable.

• Pre-built SQLite Database faster than the construction of the tables?

  Hello.

  This time when running my application for the first time, about 12 SQLite tables are created programmatically, each containing anywhere from 7 to 45 fields. Timing of the launch of the app, a call to a web service also serves the database.

  I noticed that the table under construction seems quite slow, I don't know if it's just because the application runs for the first time and the device must perform some work of registry, or if the table of construction process is actually this takes time.

  From the time I click my app icon at a time that the user interface is displayed with actual data can last from 20 seconds to more than a minute, which is not good. Do I have to create a progress meter to indicate the user to be patient because the database tables will be created, or is it possible to include the database pre-built with my app? If so how would access (where he would be on the filesystem?).

  Thank you very much.

  "If the process of construction is in fact this long"

  That would be my bet.  Easy for you, but check with trace entries.

  "Can I create a progress indicator.

  You should have a flag indicating to the user that you are doing something at least, a kind of circular icon loading would be better than nothing.  If you it can match real progress or not depends on what you are tracking and how.

  "is there a way to include the database pre-built with my app"

  Yes - See the demo of SQL comes with your set of tools.

• Oracle embedded SQLite MAF - ability

  Hi all

  I would like to know if there is no data limit for the SQLite data base integrated in Oracle MAF - how much data can be stored in the embedded SQLite DB?

  Best regards

  Deepak

  Hello.

  The theoretical limits of SQLite are described here:

  https://www.SQLite.org/limits.html

  This page mentions this subject the maximum number of rows in a table:

  The theoretical maximum number of rows in a table is 264 (18446744073709551616 or about 1.8e + 19). This limit is inaccessible because the maximum size of 140 terabytes database will be reached first. A database of 140 terabytes may no more contain to about 1e + 13 lines and then only if he has no clue and each line contains very little data.

  And on the maximum size of a database:

  Every database consists of one or more 'pages '. On the breast of a single database, each page has the same size, but other data can have page sizes that are powers of two between 512 and 65536, inclusively. The maximum size of a database file is 2147483646 pages. In the page size maximum of 65536 bytes, this translates into a maximum size of database about 1.4e + 14 bytes (140 tera-bytes or 128 000 gibibytes, 128 tebibytes, or 140 000 gigabytes).

  This particular upper limit is not tested because developers do not have access to the material capable of reaching this limit. However, the tests verify that SQLite behaves properly and healthily when a database reaches the maximum file size of the underlying filesystem (which is usually much lower than the theoretical maximum size of database) and when a database is unable to grow due to depletion of disk space.

  In other words: the maximum size of a SQLite database is usually limited by the maximum file size allowed by the file system.

  This means that you could probably create a SQLite database with billions of documents on your phone. But should you? Mobile storage is limited, and your application will coexist with many others. Honestly, if your design requires significant amounts of data on the device, you must rethink your architecture and aggregate the data on the server.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Digital limit - several tables and 1 table limit test

  Hello!

  I am quite new to Teststand and I'm stuck with a problem whose solution should not be otherwise complex... (I think...).

  I would use a "limit test digital"vi (LabVIEW module). " This vi returns 3 paintings and I would define 1 "min/max" for each table.

  that is to say:

  Array1 => each element compared to min - 1 & max1

  Array2 => each element compared to min2 & max2

  ARRAY3 => each element compared to min3 & max3

  For 1 table, I found this solution: I write Locals.ARRAY1 [RunState.LoopIndex] 'DataSource' and all the elements of the array are compared to the limits that I chose. Of course, when I add 2 tables, the same limits are compared to these new windows but I would allocate 1 limits given in table 1.

  Does anyone have an idea of an easy solution?

  My code Teststand and the small vi are here below if this might help.

  Thank you in advance!

  Consider this example.  The trick is to repeat a measurement on the Data Source tab.

• Complete the table of reference

  Hello

  What I want: complete a table that is inside a container and named function of input parameters.

  What I tried:

  I created an object reference, Locals.obj_temp, which stores the set I want to fill the inside of the container.  I seem to be able to get the number of items, define the limits of the table, insert items, etc., but I can't figure out how to put values in there actually.

  I learned today that I can use ' * ' for dereferencing the ref of the object, so I use

  InsertElements(*Locals.obj_temp,"[0]",1),
  
  

  to add an item correctly.

  But, I don't know how to make the value I want it to be, and not not not the default value zero as shown in the picture.

  for what it's worth, this is how I make the new table inside the container and obtain a reference to it.

  Parameters.UniqueFCs.NewSubProperty(Parameters.UniqueFullTable[0][Locals.m],PropValType_Number,True,"",0),
  
  Locals.obj_temp = Parameters.UniqueFCs.GetPropertyObject(Parameters.UniqueFullTable[0][Locals.m],0),
  
  

  

  I found a way to do it.

  I created a temporary table as Locals.Arr1 and clone to the container parameter I want.

  For all of you who found this thread, I have

  Locals.Arr1 //my table temp I empty at each iteration of my loop for external
  
  
  /*
  code that fills Arr1
  */
  
  Locals.obj_clone = Locals.Clone("Arr1",0),  //create a clone of obj of Arr1
  
  Parameters.UniqueFCs.SetPropertyObject (Locals.name_temp, 1, Locals.obj_clone), //copy Arr1 table in my output tray (my container is called UniqueFCs)

• Ugh... Requirement: A TimerTask making an HTTP call, parsing JSON, insertion into a SQLite database.

  How to implement a better design of the following?

  I have a UiApplication which has the following requirements:

  1. A static timer in the class that extends UiApplication.
  2. A class that extends screen and contains a class internal which extends TimerTask.
  3. When a user accesses to the screen, the TimerTask is started with:

     _timer.schedule(MyTimerTask, 1000, 15000);
     

  4. The first step is to do an HTTP call and return a valid JSON object which varies in structure - that is, it has a wide variety of paintings and JSON objects.
  5. The second step is to analyze and insert the JSON object values into tables in a SQLite database. The SQLite file is on the map.
  6. The third step is to read the updated SQLite table, loop through the table and build my ObjectListFields with the new values, and attach them to a VerticalFieldManager.
  7. The fourth step is to replace the old VerticalFieldManager with the new VerticalFieldManager and push the screen pop and updated then the current screen - so I have a stack of view high one single layer.

  Now the logic is actually on the spot, but since the TimerTask must cover every 15 seconds, I am a memory leak in all directions.

  To try to solve this problem, I have:

  • Cancelled the TimerTask with the onObscured and the onUiEngineAttached (false).
  • Restart the TimerTask with onExposed and onUiEngineAttached (true).
  • My DatabaseConnection closed the finally statement.

  However, when I look at the objects in Eclipse BlackBerry objects View when the TimerTask is not running, I still see 1 ~ 4 TimerTask objects and 1 ~ 4 DatabaseConnection objects.

  TimerTask both DatabaseConnection have a static instance (I don't have several entry points) with the following in my class that extends UiApplication:

  public static Timer _timer = new Timer();
  public static Database db = null;
  

  I attribute db when I need it with a call to DatabaseFactory.open within the class that extends TimerTask.

  Now that the business logic is correct, how to improve the design so I don't not leaking memory in every way?

  The statement closed the database is being called in, because I can set a breakpoint and see it has reached.

  Instead of onObscured/etc, you can move them into onVisibilityChange (boolean) is only in one place. Cancel your existing TimerTask before running a new, or at least check the TimerTask reference if you are only creating a... not just passing 'New TimerTask' in the calendar method without being able to track this object reference.

• VPN3005 RIP routing table number!

  Dear all,

  Just got back from VPN3005 of the client configuration. We got a "serious issue" with the VPN3005 routing table (or VPN3000 series in general). VPN3005 accepts only 199 road exactly. Not more not less. An itinerary announced by the other router is rejected by VPN3000 and "complete routing table" generated in the journal. I'm not aware of this limitation in the table, made it write somewhere in the manual or FAQ? Someone has the same problem? What other VPN3000 series, do they have the same restriction as VPN3005?

  BTW, the VPN3005 is equipped with the latest v3.6.7

  Would be very appreciated for any help!

  Best regards

  Engel

  Hello

  You are right, the VPN3005 can hold a maximum of 200 roads and this is normal.

  You can see below the URL of the FAQ:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_qanda_item09186a0080094cf4.shtml

  Kind regards

  Arul

• problem with a update sqlite using variables statement

  Flash Builder/Flex 4

  I am trying to create a routine that will allow me to change the name of an author in an sqlite table.

  I have this update statement that works with hard-coded data:

  trace ("function newAuthorName updateName:" + newAuthorName (Dusty returns));

  trace ("function oldAuthorName updateName:" + oldAuthorName (Kristin returns));

  updateStmt = new SQLStatement();

  updateStmt.sqlConnection = conn;

  var sql:String = "UPDATE tableName SET authorNameColumn = 'Dusty' WHERE authorNameColumn ="Kristin ' ';"

  updateStmt.text = sql;

  updateStmt.execute ();

  If I change the statement to

  "UPDATE tableName SET authorNameColumn =" + newAuthorName + "WHERE authorNameColumn =" + oldAuthorName;

  I get SELECT error: SQLError: ' #3115 error: SQL Error. ", details:' near 'authorNameColumn': syntax error"

  I tried to change a lot about this statement tries to isolate the problem, but it seems to not like variables.

  a better solution would be to use the settings - so you don't have to worry about adding quotes

  See: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/data/SQLStatement #parameters .html for more details

• Why my table cells that extends?

  so I made a table for the text and I lined it and the text is in Nice does not exceed the limits of the table cells. I previes in firefox it looks fine, but when I previsualisez in safari the boxes look like they grew up, while the text is placed in boxes, it's not supposed to. I'll include a photo to show you what I mean.

  It is difficult to prescribe fixes for problems when we cannot see your code.  You have a Pointant URL to your page please?

  In the meantime, watch the tutorial on Tables to style with CSS.

  http://ALT-Web.com/demos/CSS-Zebra-table.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• How to maintain the synchronization of the hierarchy of the table with customer-specific data

  Series of paintings in our system, we have:
  
  Promotions (id, descr, datefrom, dateto,...)
  PromotionClients (promotionId, clientId) = list of clients whose promotion is valid
  PromotionProducts (promotionId, itemId) = list of products on sale
  
  The synchronization logic is simply that all promotion tables must be synchronized just to the customers present in the PromotionClients table. So each select element for these tables of publication contains something like "... and there are (select 1 from c PromotionClients where c.clientId =: CLIENTID). It works fine until there are some changes in the PromotionClients table. After the change of PromotionClients table starts to sync, but other tables do not - there is in fact no updates on their respective folders.
  
  Is there a solution to this problem other than to manually create the triggers for the PromotionClients table that would execute model-update on each related table? I mean - is there an existing function in OracleLite that woud let set a few references - to load to a point of publication/table?
  
  And in the face of similar problem - there is also Promotions.datefrom/dateto limitation. Promotion tables must be synchronized at the time where actual date is between Promotions.datefrom and dateto. When someone modifies some of these values and so the promotion valid for the time related tables does not automatically update and so they do not start to synchronize. Just the Promotions table begins to synchronize. So we might need to implement another trigger to perform updates dummy on the tables of PromotionClients + products, Promotions.datefrom/dateto update.
  
  I do not like the personalized relaxation approach - it just duplicates the synchronization logic and it is inconvenient to maintain the synchronization logic in two places (pubitem selects + custom triggers). I would like to find a solution of OL-native - as referring to load tables for each publication element that would cause triggers to OL to also catch the person in charge of the lines of tables (which were not actually modified) to be marked as dirty and synchronized to the client. Is there a solution like this? Or is there an alternative better than custom triggers?

  When you trigger an event in a related table, it gets registered for PGM compose the data in this table. If there is a suspicion, MGP will compose the data in these tables as well.

  So if you have something like a REGION_MAPPING table that maps the users in various locations and if you change the table data and want other tables that are joined with him to compose the data, and then add a hint of dependency to the tables mapping them to REGION_MAPPING. If these tables is regularly updated and data are being composed for the child tables, then you don't need the trick, just good practice to add it.

• problems with calendar

  I'm having a frustrating problem with calendar projects. When the project is exported to another preview of pdf or simply buy, the months at the bottom of the page text appears as very low. There is no way to change the font size at all stages of the project. I had this same problem in November

  and got about it fly by the whole project and 4 hours of work and starting over. He then worked and I thought the problem was a corrupted file on my end.however that I have invested a whole day to do this project on two different Macs with the same result. any help or ideas would be appreciated

  !. With the help of pictures 1.5

  2. the two Macs with 10.11.4

  3. using color paper theme

  4. not all months have MONTHS small TEXT seems to be random

  First of all, as a test pictures of launch with down option and create a new test library.  Import photos and a test to see if the same problem persists. T it? If this is not the problem is limited to your library so try to repair the library according to the instructions in this document from Apple: Repair Your Library.

  Warning: If you use iCloud photo library with Photos, this operation will lead to Photos to upload all your pictures again (of difficulty missing or incorrect thumbnails in photo - Apple Support).

  If that doesn't solve the problem user jdelisle posted a fix for the same problem in iPhoto.  Don't know if it applies to Photos, however.

  jdelisle

  December 6, 2012 20:00

  Re: Change the font size of the text in a font of month date box resizes also irreversible at 6 points?

  in response to Loki cyberworld

  I ran into the same problem - my iPhoto calendar month text was small for a reason, and I couldn't change it to a larger font size. I decided to take a look at the way iPhoto stores project data and discovered that it is a simple SQLite table.

  Here is a fix, guaranteed to work.  We will open your iPhoto projects database and edit the details of the police directly by hand, because there is no way to fix this in iPhoto (Apple, correct this bug...)

  This seems much more difficult that it is what is serious effort of 10 minutes.

  1. Get SQLite Browser http://sqlitebrowser.sourceforge.net/
  2. Quit iPhoto and launch the browser of SQLite
  3. Open a new finder window and open the pictures folder located in your home directory
  4. You should see a section in your folder of photos called "iPhoto Library".  Right click and choose "Show Package Contents" because we need to edit a file inside the library
  5. Search for "Projects.db."  Right click and choose "Duplicate" to make a backup in case something goes wrong
  6. Drag and drop the "Projects.db" in the application being SQLite Browser
  7. Click on the button "browse data".
  8. Select the 'KHProject' in the menu dropdown "Tables".
  9. You will see a list of your iPhoto projects.  Locate your calendar project by browsing this list and especially the values in the column 'name '.  When you have found your calendar project, take note of the number in the column 'modelID '.
  10. Change to the "KHProjectTextStyle" table using the drop "Tables".
  11. Locate a line in the table "KHProjectTextStyle", where the number in the column matches 'projectID' 'modelID' you noted in step 9, and where the value "IdentificateurStyle" is "Photo-calendrier-CalendarMonth.
  12. On the line drawn in step 11, look at the value of the column "fontSize".  For my broken calendar, he was "6".  It's much too small, that you can barely read 6 points.
  13. Double-click the "fontSize" value (for me, I double-clicked the value '6')
  14. Replace the '6' '54.  Do not press on enter, just change the '6' '54"and click the button"Apply Changes ".
  15. You're done! Simply click on the disc icon in the browser of SQLite to save your changes (or file-> save)
  16. Open iPhoto and enjoy your calendar fixed

  Hope that helps some of you, this worked 100% for me on several projects of calendar.  If you see not the font size change, make sure that you have identified the correct project in step 8 and make sure you change the "fontSize" for this project, on the line where the value "IdentificateurStyle" is "Photo-calendrier-CalendarMonth.

  If something was terribly wrong, you did a backup in step 5 (right?) and just delete the "Projects.db" you have edited and rename "Projects.db" of the backup.  You can then try again, or not.

  I send my calendars to print this week and will see if there are any questions.  I don't anticipate any problems.

  Don't forget to back up your library before you try the hack of the database file.

  

• XP - error: WshNetwork.EnumNetworkDrives (caused by KB982802 and KB2360937)

  The following code no longer works after installing the update KB982802

  Set WshNetwork = WScript.CreateObject ("WScript.Network")
  Set oDrives = WshNetwork.EnumNetworkDrives

  specifically EnumNetworkDrives

  It crushed with 800706 6 error code the table limits are not valid.

  Can anyone help?

  Thanks Dave

  PS tried to send this in XP but windows updates link on the XP forum brings you here on the forum windows 7!

  I had this same problem.

  After installing KB982802 on Windows XP then objNetwork.EnumNetworkDrives does not work, but if there is a mapped upward drive on a Sharepoint site or if a Sharepoint site has been added to "My Network Places". If I remove the mapping on the Sharepoint site, the problem goes away. If I remove the "My Network Places" Sharepoint site then I have to restart to get rid of this problem. Of cause there other situations where this problem arises, but in my case I could link it directly on the mapping of Sharepoint site readers.

  The command "Net use" also returns an error:

  "Use of C:\>net.
  1734 system error has occurred.

  The table limits are not valid.

  Note that this is the same mistake that if objNetwork.EnumNetworkDrives is used, "the limits of the table are not valid.".

  I was able to rewrite my script of connections I used objNetwork.EnumNetworkDrives using Set Drives = objFSO.Drives and DiskDrive.DriveLetter and DiskDrive.ShareName, but it is clearly a bug in KB982802 which must be fixed by Microsoft.

  It is not a solution to remove this hotfix to all Windows XP workstations.