Line activation

Similar Questions

• Impossible to get line activated M6300

  Help!   I have a precision M6300 and I can't get the microphone headset to work.  The speaker part works fine.  It works on my other laptops.  It's as if the input jack is not enabled for the microphone.  In a thread, he said I had to turn on the input line, but the instructions there are not compatible with my system.  I am running Vista Ultimate. I tried the implementation of sound recording and speech recognition, but the system does not recognize the microphone.  The helmet that I use is the logitech clearchat premium.  Your help would be greatly appreciated.  Thank you.

  
  

• SPA 3102 - call "RTC for VOIP" setting is not on CLI/CID phone line active.

  Hi guys

  Recently, I discovered if the PSTN line is having with CLI/CID then helped the PSTN to VOIP Call not established with the standard settings. But others see (VOIP to PSTN) works well OK. Basically, it works well with the PSTN without CLI/CID lines. I guess when with CLI, there different voltage levels online. ?  You would let me know what are the parameters that I need to SPA in order to work with the PSTN line that allowed the CLI/CID please? This situation is covered by Sri Lanka Telecom PSTN lines. At the moment I have IT of standard parameters such as it comes with the SPA3102.

  Your feedback and help here...

  Syslog & debugging can save so much time...

  Line with no CLI:

   INVITE sip:[email protected]/* */ SIP/2.0 Via: SIP/2.0/UDP 192.168.1.2:5061;branch=z9hG4bK-a16a89a0 From: PradeephSL [email protected]/* */>;tag=4cc44dbb58f1a944o1 To: [email protected]/* */> Remote-Party-ID: PradeephSL [email protected]/* */>;screen=yes;party=calling Call-ID: [email protected]/* */ CSeq: 102 INVITE Max-Forwards: 70 Proxy-Authorization: Digest username="17772695735" realm="callcentric.com" nonce="684082550c6f8ce50da482371a591df7" uri="sip:[email protected]/* */" algorithm=MD5 response="01c15ae601d9d9f5af10023f908a1a4c" opaque="" Contact: PradeephSL [email protected]/* */:5061> Expires: 240 User-Agent: Linksys/SPA3102-5.2.13(GW002) Content-Length: 441 Allow: ACK BYE CANCEL INFO INVITE NOTIFY OPTIONS REFER Supported: x-sipura replaces Content-Type: application/sdp ... 

  This INVITATION is accepted by proxy.

  Line with CLI:

   INVITE sip:[email protected]/* */ SIP/2.0 Via: SIP/2.0/UDP 192.168.1.2:5061;branch=z9hG4bK-ea75ea0 From: PradeephSL [email protected]/* */>;tag=2d4fafa5d94faa2co1 To: [email protected]/* */> Remote-Party-ID: PradeephSL [email protected]/* */>;screen=yes;party=calling Call-ID: [email protected]/* */ CSeq: 102 INVITE Max-Forwards: 70 Proxy-Authorization: Digest username="17772695735" realm="callcentric.com" nonce="fd5a5e637b6e56fea56886ee25aababa" uri="sip:[email protected]/* */" algorithm=MD5 response="b6b1aa7104d1be764de5c74f369ef5be" opaque="" Contact: PradeephSL [email protected]/* */:5061> Expires: 240 User-Agent: Linksys/SPA3102-5.2.13(GW002) Content-Length: 441 Allow: ACK BYE CANCEL INFO INVITE NOTIFY OPTIONS REFER Supported: x-sipura replaces Content-Type: application/sdp ...

  This INVITATION is rejected by proxy with "403 incorrect authentication."

  But Howard has already struck and explained...

• Line active blackBerry Smartphones corrupt BB? with weird symbols!

  BB 8520 DIGICEL

  v.5.0.0.681

  Help!

  My bb8520 usually works on Digicel [a supplier of the Caribbean]. I used my bb on the AT & T service while he was studying in the United States for about two months with no problems, then recently, the bb has stopped working on this network. He took over the AT & T service and I can make and receive calls and messaging, but bbm, browser mode text and such will not work! It is not a billing issue. I asked several people, and we noticed that my line number changed abruptly of strange symbols. In addition, wifi will not work on the phone. I really need my phone back! Help!

  This looks like a data plan, problem of commissioning.  It is more likely a soemthing to do with your account.

  What exactly is the problem with wifi?

• Internal soft delete as a line activated

  Hi all

  I'm trying to implement a soft deletion for a tabular presentation. What I want to happen is for each line selected in the form, when hitting a button named remove soft, set the value of the column show_or_hide = "HIDE".

  How would I implement?

  I tried to use a base below process, and it sets show_or_hide to all the rows = "HIDE".

  Update TABLE

  Set show_or_hide = 'HIDE '.

  WHERE: APEX$ ROW_SELECTOR = 'X '.

  Thank you!

  A_Magee wrote:

  If a user can 'delete' several lines of a form at a time whenever necessary. I don't know a lot of users who would want to delete one by one and submit each time. Especially since the form is tabular and the selector box displays all lines.

  You have misunderstood how as a work process. It is not the case, users can select only one line at a time, but processes tabular work on subject lines one at a time. A trace debugging of page submit treatment illustrates this.

  As for the question above:

  What descriptor you can use with this configuration to make this feature for several lines at a time

  Then the answer is the same above origin:

  update table
  set show_or_hide = 'HIDE'
  where :apex$row_selector = 'X'
  and key_col = :key_col;
  

  APEX will substitute for the APEX$ ROW_SELECTOR KEY_COL values and for each row modified in the presented form.

• Line of the ListBox alignment BUG

  I came across a bug in the alignment of a line of the Listbox control:

  

  The code should justify the third line in the Center.

  What happens is that CellJustify, justifies all lines.

  Assistance to States to "CellJustify":

  Gets or sets the justification of text in the current line of the list box.

  If it must define the justification of the line active.

  LabVIEW 8.6

  Windows XP Dutch

  Tone

  Your dear,

  Thank you very much for your report. I did a little VI to reproduce this problem. I reported a Corrective Action request CAR 137047 # I'll keep you posted.

  Best regards

• When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?

  KiranS Hello,

  Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?

  The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.

  I can only suggest that you try again the activation by phone and see what happens.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Vista will not be activated. I'm unable to activate by phone.

  Why not line activation sms enabled windows, activation of the phone is very expensive

  original title: activation of sms line

  I see no reason why your system should not turn on correctly.

  What happens if you try posting at www.microsoft.com/genuine/validate ?

  It must pass.

  Otherwise, go to the Diagnostics page - www.microsoft.com/genuine/diag and see what it has to say.  Follow any instructions on the adjustments of the system on the site of diagnosis and then try validation again.

  Once validation passes, try the internet activation once more - if it still doesn't work, then you will * have * to use activation by telephone and speak to an operator.

  You can try to resolve your problems with the updates of Windows in a better forum, in your own language - look at the top right of this window and change the region affecting your own (Taiwan?) - then go to Windows updates to the forums there.

• I see an activation which invites when I enter my product key says that's an upgrade install not the device, this worked fine on my old hard drive.

  Prompt for activation!

  Changed the hd on my pc and upgrade to ultimate version so I had to install xp first.  Now, I see an activation which invites when I get home my says product key is for upgrade not clean installation, it worked well on my old hard drive, there is no option in the wizard product activation phone how to turn it on

  Update install requires that the eligible previous operating system is installed and activated until the key is working.

  Yu seem to have correctly installed the OS upgrade - and it will never work without assistance.

  If - and only if - you have a valid COA sticker on your computer, you can try either by calling the line Activation, as suggested by Riz_Ford, or you can also try the method of double-install from here...

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

  Note that the same procedure applies for WIn 7 for Vista.

• Activation of Adobe Illustrator CS2

  I have an adobe illustrator cs2, my computer crashed and I try to activate the program on my new computer, it tells me I have two days to activate but on line activation does not work.  Help!

  Donna Thornton

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

• Activation of Vista Premium

  Hello..

  I got my Vista Premium preinstalled system. I have Pavilion dv6767tx. I had a few problems because of who I had only the solution that was to fix the system with the disk to install Vista and not the recovery disks. I have the recovery disks but recovery would have eaten my data which obviously, I didn't. I received a copy of downloaded vista OS. I did it because I had to just fix it and my system files will be intact. So I did not know that the activation key will be gone.

  Now he asks me activation. I had OEM Vista Home Premium pre activated. So I would like to than some big help because I'm short on time and I want my key to be resettled and to reactivate my system.

  Please help me guys.

  I don't know what could be the other necessary details here.

  So please ask me and I'll let you know.

  Help!

  Try putting in the key from the base of the laptop.

  If this does not work, contact this number: 1-866-530-6599

  This number is the line Activation of Microsoft and should help you reactivate your version of Vista.

• PRC: Produce lines of assets for a single mistake poster project (the project has no assets with valid in the service dates).

  Project number project name Exception reason

  -------------------------- ------------------------------- -------------------------------------------------------

  15 Jatyuapura the capital project has no assets with valid in the service dates.

  HarvirSinghSaini wrote:

  Project number project name Exception reason

  -------------------------- ------------------------------- -------------------------------------------------------

  15 Jatyuapura the capital project has no assets with valid in the service dates.

  PRC: Generate lines of assets for a range of projects print Exceptions (Doc ID 1519498.1)

  Integrate the movements of stock Oracle Oracle projects to generate lines active & active Interface to capital assets (Doc ID 1392743.1)

  Thank you

  Hussein

• Access the corresponding line via detailStamp triggered the action

  Hello
  
  I am clearly not understanding something :/ I have a problem I'll demo with a small application here. I have a 'DeptView"(which is the SQL query mode, select deptid, deptname of Department in the HR schema) on which I based a simple af:table. It works very well, listing the data without problem.
  
  In the 'detailStamp' side, I have form fields based on the 'row' of the af var: table. This works fine as well. I use the DeptView as a DTO object, and in a backingbean action, I want to know what line the timbre of detail with the action button belongs to. Here is the demo app, showing the three different methods I've tried. The problem is the code I found returns the selectedRow, not the line containing the invocation of the action contained detailStamp.
  
  Here is an example of output about what is happening when I develop four lines, select the line 'marketing', then click "Who Dept?" in each detailStamp.
  
  http://img339.imageshack.us/img339/3912/selectedrowprob.PNG
  
  JSPX:

   <af:table value="#{bindings.DeptView1.collectionModel}" var="row"
                    rows="#{bindings.DeptView1.rangeSize}"                  
                    fetchSize="#{bindings.DeptView1.rangeSize}"
                    rowBandingInterval="0" varStatus="vs" summary="test"
                    filterModel="#{bindings.DeptView1Query.queryDescriptor}"
                    queryListener="#{bindings.DeptView1Query.processQuery}"                
                    selectedRowKeys="#{bindings.DeptView1.collectionModel.selectedRow}"
                    selectionListener="#{bindings.DeptView1.collectionModel.makeCurrent}"
                    rowSelection="single" id="t1"
                    binding="#{backingBeanScope.tableBean.depTableBinding}">
            <af:column rowHeader="unstyled" headerText="depId" id="c2">
               <af:outputText id="idCol" value="#{row.DepartmentId}"/>
            </af:column>
            <af:column headerText="depName" id="c1">
              <af:outputText id="nameCol" value="#{row.DepartmentName}"/>
            </af:column>
            <f:facet name="detailStamp">
              <af:panelFormLayout id="pfl1">
                <af:commandButton text="Which Dept?" id="cb1"
                                  action="#{backingBeanScope.tableBean.determineID}"/>
                <af:inputText label="Table says:" id="it1" value="n/a"
                              binding="#{backingBeanScope.tableBean.resultFromTable}"/>
                <af:inputText label="VO says:" id="it2" value="n/a"
                              binding="#{backingBeanScope.tableBean.resultFromVO}"/>
                <af:inputText label="Iter says:" id="it3" value="n/a"
                              binding="#{backingBeanScope.tableBean.resultFromIter}"/>
              </af:panelFormLayout>
            </f:facet>
          </af:table>

  Support action of bean:

      public String determineID() {
          
          // --------------------------------------
          // attempt data fetch by table
          FacesCtrlHierNodeBinding data = 
                  (FacesCtrlHierNodeBinding)depTableBinding.getSelectedRowData();
          resultFromTable.setValue(data.get("DepartmentName"));
          
          // ---------------------------------------
          // VO
          DCBindingContainer bindings = 
                  (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();  
          DCControlBinding cb = (DCControlBinding)bindings.get("DeptView1");
          Row currentRow = cb.getViewObject().getCurrentRow();        
          resultFromVO.setValue(currentRow.getAttribute("DepartmentName"));
          
          // ---------------------------------------
          // Iter
          DCIteratorBinding iterBind = bindings.findIteratorBinding("DeptView1Iterator");
          currentRow = iterBind.getCurrentRow();
          resultFromIter.setValue(currentRow.getAttribute("DepartmentName"));
          
          // mark textfields for refresh
          RequestContext rc = RequestContext.getCurrentInstance();
          rc.addPartialTarget(resultFromTable);
          rc.addPartialTarget(resultFromVO);
          rc.addPartialTarget(resultFromIter);
                  
          return "blah"; // doesn't matter        
      }

  I guess that a solution would be allows only a single detailStamp open at a time, and get a rowDisclosureEvent to the other door detailStamps Manager and make the current line active (someone has me code is 11g to do this easy?). I feel however that I am just misunderstanding something basic.
  
  Thanks in advance
  
  Barry

  Hi Barry,.

  What you see is expected, extend a row does not define the current line as the extended line. If you want to get the current line (where you have the button) at the click of a button, try the approach below:

     //Pass the row to the bean property on click of a button using setActionListener tag
            
                
                                  
              
                 
  
      //Inside Bean
      private FacesCtrlHierNodeBinding currentNode;
  
      public void setCurrentNode(FacesCtrlHierNodeBinding currentNode) {
          this.currentNode= currentNode;
      }
  
      public FacesCtrlHierNodeBinding getCurrentNode() {
          return currentNode;
      }
  
      public void printCurrentRow(){
          DCBindingContainer bindings =
                         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          DCIteratorBinding iterBind = bindings.findIteratorBinding("DeptView1Iterator");
          Row currentRow = currentNode.getRow();
  
          //Write your code here
  
      }      
  

  Jean Lou

• Use the listbox control to select several channels and display on the chart

  Hello everyone!

  I have a problem using the ListBox selection mode 1 or mode items. I have 6 channels of data, and I have a 2D chart. I am able to reterieve the signal names in the list box, but I want to be able to choose one or more signals to display on the chart. I used the table to index my 2D data are connected and then the output of the index table is connected to the graph. I had to use the listbox control as an index for the table to index and display the data in the index selected for display on the chart. I used lisbox as the value property nodes, the line active and all but not able to display signals on the graph. I have attached a code example to show you what exactly I'm looking.

  Any suggestions will help a lot.

  
  

• Impossible to validate windows xp pro

  I just had to change the motherboard and hard drive on my computer. I reloaded windows xp pro with the right key code but now I can't use the same key code to activate it on phone line activation and you enter the installation id told me that my copy is not genuine, however, it has been provided by Microsoft.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com