line of control guide

Similar Questions

• OfficeJet k7100: 'lines of control open or shorted' repeated error - 344 cartridges

  I have an officejet k7100.

  I'm getting a problem repeated with original hp 344 colour cartridges

  the red light on the left flashes (which indicates a color cartridge problem) and the printer refuses to print.

  When I do a test by TAPPING, the error is "the pen in the left chute has 1 or more lines open or shorted control."

  I tried - to buy 2 more cartridges.

  the purchase of a second identical printer (used) on ebay.

  same error each time, even refused to print. What combination of printer cartridge / I'm trying. very frustrated...!

  ideas (apart from 'buy epson') most welcome!

  There are a few things to try:

  • Remove the color cartridge and try to print a page.  (The printer may still indicate a missing cartridge, but it should display ink backup mode).  The printer now shows that the black cartridge is at fault?  If so replace the color cartridge and remove the black cartridge.  If this prints correctly the black cartridge was involved.
  • Clean the cartridge and the contacts in the printer as shown in the document here.  It is a different printer but same principle.

  If the above does not help, I would say by the way by the troubleshooting steps described in the paper here.

• Variable lines of controls that is scrollable

  I've been struggling with the list control to use and I hope someone can point me in the right direction and save me tons of experimentation. I have a command line: couple of buttons, labels and a selector. I can have a variable number of these lines and you may need to allow the user to scroll the. Function of selecting a previous user, I may have a variable number of lines of these controls.

  What is the best class, list, or component to use for this?

  Appreciate all the guidance,

  Thank you.

  List of QNX probably with a custom converter.  There are a lot of discussions about it.  If you get stuck, your postal code to allow others.

• In designer Mode, it is Possible to the spacing between the lines of control?  How?

  Hello

  Is there another way to control the spacing between the content PUSHING words to the next line with SPACE?

  http://www.collegestudentvoice.com/

  Even when I opened UNTITLED' page without my customized page layouts there is a space between line in own page why I write sentences.

  see you soon,

  Dreamweaver101.1

  (1) never trust design mode - only view that counts is rendered in a web browser.

  (2) padding using CSS, margins and the row height to control spacing. Use not (nonbreaking space) or
  General formatting tags!

  (3) Dreamweaver is not a word processor. It is futile to try to use it as such.

  (4) give up the idea that you can control all aspects of the presentation of your document. You can not. Users viewing your page will use different settings, have different fonts and do different things beyond what you expect always. So instead of "force" users to view the document the way that you think it should be considered, use the flexibility of HTML documents to allow the user to view your content in a way that suits them best.

  As always, to learn the language (HTML and CSS) to get the best results on the environment (web pages). I hope this helps.

• PID position control: guide me

  Dear Member

  I want to build a position of PID control

  I read the DC position by potentiometer with 360 degrees-128 to 127 [complete]

  If the pid entry is range of voltage between-128 to 127

  the entrance of motor continuous is PWM and the direction of motor rotation

  If the output of PID is PWM

  What bit of direction? What will be this tour

  also how to control the speed in the same system? is Taylor PID another?

  Best regards

  mangood wrote:

  What, control the position and speed at the same time?

  It's a complicated problem. A quick search on the internet turned to the top of this article that describes some possible approaches:

  http://www.IDT.MDH.se/Kurser/ct3340/HT09/administration/IRCSE09-submissions/ircse09_submission_22.PD...

• Programmatically change the selected cell/line of control multi-column listbox

  I want to programmatically change the selected cell of a multicolumn list box whose selection Mode is set to highlight the whole line.  I would use this to highlight the line whatever the list box, I chose to.  It would work the same way if the user has clicked on a line to select and highlight that particular line.  Set Active cell does not fulfill this.

  Steve

  Try to use the property value; p

• BUG: 4.2/5.0 interactive reports: attributes inconsistent/incorrect HEADERS in control break total lines

  When pause control and global actions are applied to an interactive report, the headers attributes generated for cells in the total break lines are incorrect.

  The cell in the total row headers attributes must contain the values of the id attributes of the column headings that apply to the total cell, which is the ID of the header cell of column with the header of the previous control break cell. In this example, the headers value of the total cell Dept 10 Sal to line 24 should consist of the value of "SAL" (line 12) Sal column header ID and the ID "BREAK_DEPTNO_1" of the line of control break Dept 10 (line 3). Instead, it includes the value 'BREAK_DEPTNO_2' of the Next control pause (line 29). The problem repeats for the ex-post control breaks. However, the model is incompatible, and the values for the final control (86 and 107) break lines are correct.

  This problem exists in APEX 4.2 and persists (even if using a different pattern of ID) to 5.0.

  <table summary="" cellpadding="0" cellspacing="0" border="0" class="apexir_WORKSHEET_DATA" id="12082517246125452">
    <tr>
      <th colspan="4" class="apexir_REPEAT_HEADING" id="BREAK_DEPTNO_1">Deptno : <span class="apex_break_headers">10</span></th>
    </tr>
    <tr>
      <th id="ENAME">
        <div id="apexir_ENAME" onclick="gReport.controls.widget(this.id)" style="text-align:center;">Ename</div>
      </th>
      <th id="JOB">
        <div id="apexir_JOB" onclick="gReport.controls.widget(this.id)" style="text-align:center;">Job</div>
      </th>
      <th id="SAL">
        <div id="apexir_SAL" onclick="gReport.controls.widget(this.id)" style="text-align:center;">Sal</div>
      </th>
    </tr>
    <tr class="even">
      <td align="left" headers="ENAME BREAK_DEPTNO_1">CLARK</td>
      <td align="left" headers="JOB BREAK_DEPTNO_1">MANAGER</td>
      <td align="right" headers="SAL BREAK_DEPTNO_1">2450</td>
    </tr>
    <tr>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="ENAME BREAK_DEPTNO_2"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="JOB BREAK_DEPTNO_2"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="right" headers="SAL BREAK_DEPTNO_2">2450
        <br />
      </td>
    </tr>
    <tr>
      <th colspan="4" class="apexir_REPEAT_HEADING" id="BREAK_DEPTNO_2">Deptno : <span class="apex_break_headers">20</span></th>
    </tr>
    <tr>
      <th id="ENAME">
        <div style="text-align:center;">Ename</div>
      </th>
      <th id="JOB">
        <div style="text-align:center;">Job</div>
      </th>
      <th id="SAL">
        <div style="text-align:center;">Sal</div>
      </th>
    </tr>
    <tr class="odd">
      <td align="left" headers="ENAME BREAK_DEPTNO_2">SCOTT</td>
      <td align="left" headers="JOB BREAK_DEPTNO_2">ANALYST</td>
      <td align="right" headers="SAL BREAK_DEPTNO_2">3000</td>
    </tr>
    <tr class="even">
      <td align="left" headers="ENAME BREAK_DEPTNO_2">JONES</td>
      <td align="left" headers="JOB BREAK_DEPTNO_2">MANAGER</td>
      <td align="right" headers="SAL BREAK_DEPTNO_2">2975</td>
    </tr>
    <tr>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="ENAME BREAK_DEPTNO_3"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="JOB BREAK_DEPTNO_3"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="right" headers="SAL BREAK_DEPTNO_3">5975
        <br />
      </td>
    </tr>
    <tr>
      <th colspan="4" class="apexir_REPEAT_HEADING" id="BREAK_DEPTNO_3">Deptno : <span class="apex_break_headers">30</span></th>
    </tr>
    <tr>
      <th id="ENAME">
        <div style="text-align:center;">Ename</div>
      </th>
      <th id="JOB">
        <div style="text-align:center;">Job</div>
      </th>
      <th id="SAL">
        <div style="text-align:center;">Sal</div>
      </th>
    </tr>
    <tr class="odd">
      <td align="left" headers="ENAME BREAK_DEPTNO_3">BLAKE</td>
      <td align="left" headers="JOB BREAK_DEPTNO_3">MANAGER</td>
      <td align="right" headers="SAL BREAK_DEPTNO_3">2850</td>
    </tr>
    <tr>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="ENAME BREAK_DEPTNO_4"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="JOB BREAK_DEPTNO_4"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="right" headers="SAL BREAK_DEPTNO_4">2850
        <br />
      </td>
    </tr>
    <tr>
      <th colspan="4" class="apexir_REPEAT_HEADING" id="BREAK_DEPTNO_4">Deptno : <span class="apex_break_headers">40</span></th>
    </tr>
    <tr>
      <th id="ENAME">
        <div style="text-align:center;">Ename</div>
      </th>
      <th id="JOB">
        <div style="text-align:center;">Job</div>
      </th>
      <th id="SAL">
        <div style="text-align:center;">Sal</div>
      </th>
    </tr>
    <tr class="even">
      <td align="left" headers="ENAME BREAK_DEPTNO_4">FORD</td>
      <td align="left" headers="JOB BREAK_DEPTNO_4">ANALYST</td>
      <td align="right" headers="SAL BREAK_DEPTNO_4">3000</td>
    </tr>
    <tr>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="ENAME BREAK_DEPTNO_4"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="left" headers="JOB BREAK_DEPTNO_4"></td>
      <td class="apexir_AGGREGATE_VALUE" style="white-space:nowrap;" align="right" headers="SAL BREAK_DEPTNO_4">3000
        <br />
      </td>
    </tr>
  </table>
  
  

  Hello

  My apologies for the delay in responding and thank you for the detailed description of the issue.

  I could easily replicate this and filed bug 20889405 to follow, which will fix us as soon as possible. There is no workaround solution currently I'm afraid.

  Thanks again for posting this.

  Kind regards

  Anthony.

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• Spacing between lines of text

  I want the spacing between each of these lines of smaller text in other programs that I would cheat by making the font between the groups of 4 or 8 size text size. I can't do it in Indesign? Is there another way to do this? Thank you!

  Reflect: think carefully about experiences, personal knowledge past and examine what has been learned.

  Fundamental value: a small set of key concepts and ideals that guide a person's life and help him to make important decisions.

  Self-awareness: be able to understand and to self-regulate your emotions that they occur.

  Spacing between lines is controlled by the 'leader '. If you do not set something else, the 'automatic' deafult, spacing is 120% of the size, as in Word, but you can set any fixed amaount you like, or you can change the percentage of 'Auto' in the settings of Justificatin for paragraph or the paragraph style. Extra space between paragraphs is added correctly by adding "Space before" or "Space after" to a paragraph, not pressing Enter to make a blank line and by adjusting the size of this line.

• Possible file corruption: controls/scroll bar disappearing

  I worked on a VI using LabView 8.6 for awhile and when I opened it today I noticed that although scroll bars are visible on the façade,

  the rectangles that you enter in the scroll bar to move upward or downwards are missing.

  I tried to solve this by masking and display then scrollbars in the following way:

  1. in the VI preferences window

  2. by right clicking on the scroll bars

  3. dynamically using a property node bound to the pane and using the properties of "HorizScrollbarVisibility" and "VertScrollbarVisibility".

  Also, I searched the forums and found some similar positions with some suggestions:

  http://forums.NI.com/T5/LabVIEW/front-panel-is-not-shown-completely/m-p/932988?view=by_date_ascendin...

  24/06/2009 Altenbach suggested to open a new VI and copy the code through.
  -When I tried the solution of Altenbach, the scroll bar grab tool on the front panel has been visible for a few seconds and then disappeared when I tried to use it.

  With the scroll error bar is the fact that 4-5 controls in my program are not on the front panel more.

  When I try clicking on their terminal, a blank part of the façade is shown.

  Right click on the line of control gives an indication that the controls are not hidden on the façade.

  Any ideas on how to solve these problems without having to go back to a week of the program version and rewrite the added code from there me?

  I found an adjustment wheel on my front with caption text and scale was not placed on the top of the circle of the object of the front portion.

  They had been randomly moved a few thousand pixels to the right of the control.

  To reset the text position and scale that I had to right click on the object and replace the dial with a new dial.
  The scroll bars work now and the missing items now.

  My guess is that the error was caused by the limits of the cover being so big.
  In addition, objects that I could find were those who are invisible until a user event makes visible.

• Read a PFI line in LV2009?

  Is there a screw (2009) which will allow you to access the value on the PFI lines live?  See what they are?  The wired customer lines PFI to read a logic level under certain conditions.

  clint100,

  I think that there is some mixup nomenclature, let me give you my point of view to see if that clears up things.

  While you can't 'read' the PFI line, it can use an event on this line to trigger or sample (see the link a few posts to the top) to do something, you might be "expecting".  I also see why you want to read or query the line to control the flow of your code, if you were on a microcontroller or FPGA you would be wrong.  The traditional DAQ or DAQmx driver is more abstract than that and will want to take this entry as a trigger, or a sample of clock.

  That being said, there is a bagillion to the examples in the example finder to help you configure that.  Otherwise, I may be completely wrong interpret the sentence you put in your message, anyway, good luck!

• See also defects during the first seconds of startup (BIOS while in control of the system)

  Hello. My Dell Latitude d 820 has started to show problems. The flaw of disp. most striking is when I start my laptop. I see groups of blue lines over control of the system BIOS. If the initialization is complete, I find my disabled graphics card. Another thing is that I get a blue or black screen like a dead end. The blue screen comes with three different erros. Perhaps the more understandable error msg is: the problem seems to be caused by ( lvl4-disp). Or theinfinite loop error msg. My video card is nvidia Quadro NVS 120 m. I use Win. XP. SP2 32-bit. what I've done so far is that:

  I saw the net to enlighten me on this anomaly of display and the infinite loops and BSoD problems.

  I updated the drivers of disp.

  I formatted, used the system restore, cancel the restorations, xp used with the back of previous service.

  I depended on the onley, ignored drivers VGA drivers Nvidia, ignored the automatic updates...

  THE results are:

  mistakes only temporarily disappeared and returned in the same way that they have used.

  I can't understand the appearance of vulnerabilities display specific question as soon as the blue screen appears sudenly

  NOTE: the battery is out of order for months now and I use the 90v power adapter to power my laptop.

  the problem appeared all first some time after I put at the disposal of the battery.

  HELP PLZ

  THANX

  Hi mohammad,.

  Good to know my information has been useful. The steps you plan to take seems to help you refine the fear.

  After return with any other questions about windows.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I book automatically batch-controlled items in the Bill only with command Interface of the inventory

  Hello!

  I use Line Flow - generic, Bill only with workflow online Interface of the inventory in the sales order and when I book the order lines batch controlled items are not reserved, I still need to keep an inventory of the booking form. How to automate this when booking?

  Thank you

  Jon

  Auto is by setting the value in the OM system settings > booking closing time (ours is R12.1.3).

• Can break some intersections Guide and not others

  In Illustrator CC 2015, I run the questions where I can snap to intersections Guide (90 degrees, a vertical guide and a horizontal guide) but not others. The two intersections are on a single vertical line. I have unlocked all the guides, and brought them all to the front layer (just in case where what matters) and still nothing. When I select the pen tool and hover on the intersection A, the pointer snaps to the intersection, the indicator displays "intersect". When I select the pen tool and hover on the intersection of B, the cursor follows the horizontal Guide, but as soon as I get near the intersection, it stops after the guide, as if the intersection is pushing the snap.

  Is this a problem of layers? If I move the vertical line (not the Guide) at the intersection of B away, I can line up the intersection to Guide very well. All Guides are arranged for the 'front' (right-click > reorganize > bring to front). The cursor does not follow the vertical Guide at the intersection B at all for some reason any. I'm baffled that I can't get the reliable behavior in identical situations, and I can't find a way to fix and more to remove the vertical line, which should play second fiddle to the Guide!

  My preferences are:

  Selection and display of the anchor:

  Tolerance: 3 px

  Checked the selection of object by trace only

  Snap to Point: 8 px

  Checked the Ctrl-click to select objects behind

  Guides:

  All boxes checked except for measurement labels

  Alignment of tolerance: 4 pt

  You have any 3rd party utility or a Tablet?

  My Mac cc2015 is good to work and get the intersect, even with your settings. Your settings are customized, I recommend you to reset your preferences.

• Remove the line to the next intersection addon?

  Hi all

  I've noticed with the type of work I do it would be very convenient if there is a tool that, when I click on any line, it will partially remove this line to the point where it intersects with any other line or the guide.

  Does anyone know of a tool or modification of existing tools addon for this?

  Thank you very much

  Try the tool shape illustrators.

  See manual o how to use with lines.

  Or try dynamic Sketch plugin

  DynamicSketch plugin for Adobe Illustrator - clever graphic