Link slideshow problem and the thumbnail?

Similar Questions

• error 1321: NTauthority or Services and controller app sez he has a problem and the computer shuts down

  sez no authority trying to run AVG or Malwarebytes - every 1/2 hour or if some "prog system? NTauthority or Services and controller app sez he has a problem and the computer shuts down

  Hello

  • What is the full error message?
  • What were the changes made to nfore this question?
  • What exactly do you mean by "no authority running avg or malwar bytes?
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

• "Media Center Receiver service has encountered a problem and the need to close"

  "Media Center Receiver service has encountered a problem and the need to close" I had to do a Windows XP system restore since then I continue getting the error message appearing all the time. How can I disable this message?

  Hi Keith,

  What is your level of service pack?

  Let's try the following: How to configure Windows XP to start in a "clean boot" State. This could help us eliminate third-party applications that may cause a conflict.

• It can't open word document because an importer of appropriate chart is not found. I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. __

  Cannot open word document because a

  "appropriate graphics importer is not found."

  I had this problem and the technician "selected" Word as an opener, but I don't know where to find them on my computer. Can you direct me while I have when I want the word docuents to open they will be?

  Right click on the saved file.
  Select: Open with on the shortcut menu.
  Click: Choose [default] program
  Letter: Microsoft Word
  Check: Always use the selected program to open this type of file.
  Click OK.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• an error message appears indicating the pc has a problem and the computer shuts down

  an error message appears saying the pc has a problem and the computer shuts down.

  What do you do when this happens?  It is the way in which computers to protect the components of your computer.

• Cabinet detects 2 problems during analysis, but in the end that he said found no problem and the only option I have is to click Finish

  I have downloaded Microsoft Windows Malicious Software Removal Tool (KB890830) - to install the CAB file switch and it detects 2 problems during analysis, but in the end that he said found no problem and the only option I have is to click Finish. I tried several times with the same result of detection 2 never, he gets rid of them. Help?

  OT: Malware

  On Saturday, April 5, 2014 22:59:18 + 0000, JChabler wrote:

  Where? I find only free trials to detect, but you have to pay to resolve.

  Go to https://www.malwarebytes.org/ and lower-left button
  corner, one that says "Free download."

• You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  Hi Charles,

  
  

  It is specific to a particular file or all the files that you are trying to open, gives you the error.

  How you open the same file using Preview on Mac.

  
  

  Thank you

  Vikrantt Singh
  

• Once I click on "Solution available? I have found that the signature of the problem and the additional info.

  What should I do to actually solve the problem? APPCRASH. The problem is the host process for Windows Services has stopped working

  Hello

  1. when exactly you get this error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Also, you can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

• I installed CA secruity suite yesterday and evertime I try to open it, I get a pop up of microsft windows saying there was a problem and the program closes

  Yesterday I installed Security Suite CA.  It installs and everything indicates that it works correctly, but when I try to open a pop-up appears microsoft Windows telling me a pproblem occurred and the program stops, and then another pop up appears saying program closed and they send me a solution if there is

  Here are the codes I found impossible to repair... files should I copy the whole report or is it enough to make me help with this question?
  POQ 76 ends.
  2011-04-03 07:55:23, Info CSI 0000018e [SR] full Verify
  2011-04-03 07:55:23, CSI 0000018f [SR] components Info check 100 (0 x 00000064)
  2011-04-03 07:55:23, transaction Info CSI 00000190 [SR] beginning verify and repair
  2011-04-03 07:55:35, Info CSI 00000191 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:35, Info CSI 00000192 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, info CSI 00000193 hashes of file Member \SystemRoot\WinSxS\x86_microsoft-windows

  -sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini are not real file [l:24

  "{12}]" Settings.ini ":
  Found: {l:32 b:ntPb8a3owMmbzl2TXFHogrOTUqnXgzASIdBVmJptaGE =} expected: {l:32

  b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o =}
  2011-04-03 07:55:39, info CSI 00000194 [SR] cannot repair the military record [l:24 {12}] "settings.ini" of "

  Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =

  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, PublicKey neutral in the store, hash

  incompatibility of
  2011-04-03 07:55:39, Info CSI 00000195 [SR] this element is referenced by [l:158

  "{79]" Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR.

  Hello

  ·         This software provided by the ISP (Internet Service Provider)?

   

  Method 1:

  I suggest you to refer to the link provided below to uninstall and reinstall CA security.

  Step 1:

  To uninstall a program in Windows Vista see the link below.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

   

  Step 2:

  Once you uninstall the program reinstall to install a program under Windows Vista refer to the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Method 2:

  You can also contact the CA Technologies team for available updates or patches to fix the problem.

  http://shop.ca.com/ca/support/freeis.asp

• Cannot "turn on media streaming" - another user of Windows 7 with the same problem and the "suggested correction '' does not.

  This windows bug has been reported and 'responded' before by several people, but the "answers" do not work for me - and they do seem to work for a lot of people in this area and other forums.  I hope you can provide me with a real estate diagnosis, a reason for why this happens and a real solution that works for everyone.

  I'm trying to 'Turn on media streaming' in Windows Media Player so I can listen to my xbox and other home theater equipment.  The problem I have is the same problem as [of] other people have reported: in Windows Media Player, I press the turn on the 'link', the button greys streamin media shortly, but then nothing, and streaming is not enabled.

  I don't have a network problem.  I was able to extend Microsoft Media Center on my xbox.  (simply not enable streaming in WMP).  With media center extended is a large (better) workaround for the xbox, but this isn't a solution for my other home theater devices. I need to be able to listen to my receiver and blu - ray player, as I have done on my old PC running Windows XP.

  I have a fresh install of Windows 7 Pro, x-64 on a new machine of self-building.  Everything else works, it is not the machine.  I installed all the latest drivers for my machine.  I have all the updates for Windows 7.  I run the Windows Firewall and Kaspersky Anti Virus 2010.  I installed Microsoft Office 2007, Outlook 2007, Visio 2010 and many other applications 'standard '.  I'm not under any program of low-level "weird."

  As other people "suggested", already tried the action of the outgoing WMP, stop the Windows Media Player Network Sharing Service using service.msc, then by removing the .wmdb (and other files but not directories) by my dirctory users/xxx/AppData/Local/Microsoft/Media Player, restart the Service of network share WMP using services.msc and then restarting WMP.  This had no effect.  (I tried several times with and without having to restart WMP network sharing service manually.)  I tried to change the Windows Media Player Network Sharing Service, tab log (the default on my system) Network Service to Local System with "allow service to interact with desktop" chosen as someone another "suggested".  This does not seem to do anything.  I also tried to uninstall WMP and WMC player (using "turn Windows has or disable"), restart, then adding them and reboot.  This time this icon "turn media sharing on" returned in WMP (the icon is usually party WMP Stream/turn on media sharing window).  This time Windows 7 Pro thought a little longer before doing nothing.  (However, now I get a message error "an error has occurred. Not all features have been changed successfully. "in an attempt to"Reinstall"Windows Media Center after you have reinstalled WMP.)  The resettlement of WMC has returned an error.  I can no longer start Windows Media Center on my PC.

  So, by all posts on this topic, its obvious this is a real bug in Windows 7 (maybe?), (perhaps only on x - 64?).

  Just two more things on my setup... I did not initially set up homegroup (because I have no other Windows 7 machines), but I tried that implemented to see if it had an effect (it didn't).  The part only 'weird' of my installation, I mounted my D: drive (2nd hard drive) in C:\Users (because I use a Solid State Drive for the operating system on C: and don't want the user data on this subject).  This has not caused other problems, but I wanted to throw it out there in case Windows Media Player sharing is something weird here.  (And no, I'm not going to 'try to change' that, unless it is a known fact that that's the problem - and then I would need a different solution to move my user data off the coast of the SSD.)

  So please, let me know what is the real problem why it happened to me (I'm sure some people can turn on streaming in WMP), and what is the real solution.  (There seems to be a multitude of suggestions on the web for all kinds of different 'fixed', but which, if any, is the right one?)  Please do not just suggest things to try.  What is the right benchmark?

  Go to network and sharing center open view full map, right click on your PC and click on manage.

  then open services and applications, and then serivces and find Upnp device host, right click and click on reboot and make sure that it is set to automatic.

  Now scroll down to Windows Media Player Network Sharing service, do a right click and click on reboot and make sure that it is set to automatic also.

  It should work, it worked for me and everyone I know but... The only problem I have is when I restart my PC, the drive share Windows Media network service changes from automatic to automatic (delayed start) and I have to restart again the Upnp device host and Windows Media Player network sharing service.

  Other than having to do every time I restart my PC, it works perfectly.

  Also, if anyone has an idea of why it changes (delayed start) let me know thanks...

• scnotification has encountered a problem and the need to fill. We are sorry for the inconvenience.

  Hi team,

  I get this error window again and again. It keeps popping up.
  "scnotification has encountered a problem and need to close. We are sorry for the inconvenience. "
  When I tried in the sites I don't get the solution for this.
  Please help me to disable.
  
  Thank you
  Sandesh

  Hey Anshul,

  Yes, it's in the domain network.

  No hardware / software changes have been made.

  normally when I opened all the windows / browsers, this will start to come.

  I am running windows XP.

  Please tell me why it is causing the problem.

  Thank you

  Sandesh

  This forum is designed for Windows 7. Furthermore, the guys here, will not be able to answer your questions about a domain network.

  You can find someone who knows more about the Microsoft Technet forums - (the link is on the Aussie forum). These are the nuts and bolts of good Windows forums.

  See you soon!

• Activation problems and the computer crashes

  Original title: help

  I mean I used my pin code to activate my Microsoft, but frozen loading so it restarted and I returned it but he said he could not load because it has already been used! what I do and it says im on a trail and its going to expire

  Hi Jennifer,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, there are questions while activating.

  These problems may occur when you connect to the Internet through a proxy server where basic authentication is enabled.

  Perform the steps from the link below and see if it helps.

  Activation of Windows fails and may generate 0x8004FE33 error code

  Hope this information helps.

  Answer to us if you are having problems with the Activation of Windows or any other Windows problem, and we would be happy to help you.

  Good day!

• Sound problems and the modem EA60-155

  3 weeks ago I received my laptop EA60-155 and have experienced ongoing problems with the sound and modem on the laptop. I bought the laptop from currys so am sure that they are an authorized dealer.

  The problem is different, sometimes I turn on the laptop to find out, there is no sond and the modem does not work, sometimes the sound works and makes the modem for about 15 minutes before the problem arises again. I bought the machine to the dealer authorized to Bahrain twice now, twice they said them that the problem was resolved when he doesn't. I called the center of appeal twice, but I still have the problem. Any advice would be greatly appretiated.

  Hello

  If you have this problem permanently, you can try to reinstall the modem and sound card. If the unit is pre-installed with recovery DVDs, it should work fine. As a first step, you can try and remove the sound card and the modem from Device Manager, then restart the device. The two hardware components must be recognized and installed again.

  If there is no success I recommend you backup your data and reinstall the OS using recovery DVDs. On this way the unit will be clean installed and there should not be any problem. Every problem that happens after that can be some hardware malfunction and you must contact the Service partner again.

  Good luck!

• Satellite U400-112 - WoW problems and the image is not good

  Hello!

  My laptop is Satellite U400-112 and matching video Intel X 3100.

  When I play in openGL, 3D graphics on minimum and the image quality are not good. The same situation with Direct3D even worse. I have a guess - the game not installed, I copied the folder with the game on another computer, maybe I need to reinstall? I installed the latest drivers for the video of the official website of Intel.

  Maybe someone have the same problem and can help me to solve it.

  Hello

  This only happens on the world of Warcraft or in other games too?

  I'm a bit confused because you have set the minimum graphics and then you wrote that the photo isn't good in my opinion that's normal as the photo isn't good, if you play on minimum graphics settings.
  Maybe you can post a screenshot screen or something else.

  You also need to update DirectX version on your laptop that you can find on the Microsoft Web site.