Linksys EA4500

Similar Questions

• Linksys EA4500 all just terrible!

  I've owned this router for over a year. Using this router has been the worst experience with routers ever. Let me count the ways: 1 non-existent Support Linksys is now owned by Belkin 2 Firmware updates 1 and it was awful and should be deployed 3 constantly remove connections, worst performance I saw. 4 cloud bloatware, no value added to the router service. 5-speed connection never connected to the FIOS maxspeed 6 would not give it to my worst enemy 7 support, support, support. Interview about known issues never discussed. 8 is a boat anchor good. That's all. I've since replaced this with a Netgear WNDR4300 router. Excellent!

  Do what I did, take it back and buy Netgear! Works 100% of the time and to double the coverage in my house. Linksys is not reliable co, allows it to be.
  Do yourself a favor and get rid of it!

• Cannot see SIN on my local network by its name (Linksys EA4500)

  Hello

  I just bought a new EA4500 and implemented at home. Most of the stuff worked like a charm, except one. I don't see my NAS Synology on my network domestic byt its name.

  I have the router connected to the internet (local ISPS, PPPoE). I have the NAS connected by wire, two Windows 8 PCs connected wireless. There is also a TV (wired connection), a printer, some phones Windows and heightens. One of the PC does not see the SIN (the other can). It can connect to it by its IP address (in the browser, by ping), he can see his Media Server (I can play the music of the NAS in my Media Player), the TV sees the SIN as a DLNA media server... But the PC does not see the NAS by name.

  If I have a list of the devices connected on the router, I can see the NAS and its name. But the PC can't. What's wrong?

  Both computers have enabled file sharing. I have same SSH was to the NAS ind successfully ping the PC by name. For full disclosure, the PC has VMWare installed with the Windows 7 virtual machine.

  I does no settings to the router other than using the Cisco Connection Wizard and disabling wifi comments.

  Thank you very much for your suggestions.

  Thank you. Any reboot didn't help. It happed to resolve itself eventually. I've been playing with the wifi and FIPS set parameters (and not defined). Then it worked. No idea if it was a coincidence.

• Linksys EA4500 - Widgets are empty

  Hello

  When I connect to the router via the local access... the widgets on the home page are empty. I've had several of these routers Wifi Smart in the past and never noticed this. It only seems to happen in Chrome and FF. In IE, it works fine.

  If I count of connection to the chip Wi - Fi through Chrome, the work of widgets properly.

  Any ideas on that?

  Thank you!

  Fixed after erasing history.

• Degradation of package with EA4500

  Hi all

  I'm a noob here. But I have a problem with my router and I don't know where else to go. I'm fill my method for the Linksys EA4500 router, and it gives me only to 8MBps while the line speed 14MBps. I tried to connect it directly to the method by disabling the EA4500 and I'm 14MBps. Can someone tell me what is happening or a way to increase my speed?

  Kind regards

  Sujith

  You have DSL?  What is the brand and model of your modem/router method?

  If you have ADSL and you put your ADSL modem in bridge mode and the linksys is configured for PPPoE, then you probably need to change the mtu.

  Even if it isn't your Setup, I always check the mtu and see if it is correct.  In addition, you must update the firmware of the EA4500 (if necessary)... and reset to the factory settings and reconfigure.

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=172c1dae41534ddd818c560b60c7c230_4029.XML&PID=80&...

  http://homesupport.Cisco.com/en-us/support/routers/EA4500

• EA4500 not find Netgear ReadyNAS 104

  Just bought a Linksys EA4500-NP to replace my Linksys Wireless - G WRT54GL

  Have all the configurations works very well EXCEPT FOR Netgear ReadyNAS 104

  When I turn on the NAS I get boot error "unable to connect the server discovery.

  The WRT54GL assigned IP 192.168.1.10 to the NAS

  The assigned EA5400 IP 10.42.181.142
  Devices of will NOT handshake

  DOES ANYONE HAVE ANY SUGGESTIONS.

  All Linksys Tech Support says "call Netgear.

  Configuration of the network attached as photo

  

  jaholstein wrote:
  @chadster766: great response.

  then could I also change / force the //server be 192.168.1.10... just in case the other DHCP auto-assigns Protocol thing as 10 on the NAS? If so - would appreciate steps & screenshots. Use a DHCP reservation so the server always gets the same IP address of the DHCP server

  Oh and here I have the NAS or disable during the walk cycle for EA4500 then switch you mentioned earlier? On

  Comments above:

  

  

• On buy the EA4500 don't want to update the firmware of cloud

  Hi, im about to buy a Linksys EA4500 router. Ive read that there is a forced update. And I have to use the cloud. If I brought the EA4500 and connected to my pc but it not connected my modem for internet access. And then to the web interface. Y at - it an option to turn off the manual upgrade of the automatic updates Ie and uncheck the update automatically on the firmware option coming out of the EA4500 in a box?
  THX in advance

  Hello! If you want to disable the automatic update, all you have to do is to access the Advanced Settings page by typing 192.168.1.1 in a browser address bar. He will try to guide you with the Setup process, but you can skip (you will see a link to skip the installation). If it asks for the local login, use "admin". Click the connectivity on the left tab. Once the window opens, you will see a check mark for "Automatic" under firmware update. Uncheck the box and click on apply. BTW, even if the router has the firmware of the cloud, you can always choose to access locally and not through cloud.

• Windows PC sees Time Capsule, but not content

  I have two windows 10 PCs, configured the same way (or so I thought). The laptop can see the time Capsule to explore and view the content.  Sometimes, the desktop PC sees the time at the Airport & Explorer utility Capsule, but cannot see the content.  I'm sure it's some settings in Windows and not a problem of TC, but I don't know what to change.  I have active NETBIOS.  Time Capsule (version 7.6.4) is used only as a NAS wireless and not connected to the Internet.  Here are some parameters:

  The IP address starts with 169.254; However, it also shows an IP 192.168

  File sharing is enabled with a disk password.

  The TC has created its own wireless network.

  As mentioned, as the laptop sees the TC and the contents of folders / when I am connected to the wireless network of the TC, and the laptop does not work, I'm pretty sure it's a Windows setting that's my problem.  Last note: desktop PC is connected to my Linksys EA4500 router via an Ethernet cable and wireless network the TC via a WiFi/Bluetooth internal to Intel card model 7260; the office is a NUC Intel that I assembled.  In the past, the Office has been able to connect to the CT; all this occurred when I changed routers of the AT & T combo modem/router to a DOCSIS 3 modem and a Linksys EA4500 router.

  All thoughts welcome, thank you.

  The IP address starts with 169.254; However, it also shows an IP 192.168

  Sorry, but the INVESTIGATION period cannot appear as two different addresses.

  Your installation of the TC program is unusual... and will cause problems...

  So can you please give me the installer with some screenshots.

  I can also ask why are you keeping the independent TC of the main network... which just makes life difficult. If you are forced to do so for a reason any logistics... so let me help you find a way to do within the existing network, rather than in a different subnet.

  When you try to access two different IP subnets at the same time... gateway and DNS issues come to the front.

  So it is not really going good work with an address 169.254 since it is self generated.

  I'll assume that your linksys EA4500 takes the 192.168.x.x address which is default for linksys products.

  Please change the TC in router mode... That is to say DHCP and NAT. (there is no reason that it cannot be connected to your network via the WAN port with this configuration).

  You can ignore or not connected WAN warnings or cautions Double NAT.

  By default, the TC will have IP 10.0.1.1

  Define the NUC to take a static address on the... wireless card for example 10.0.1.10 with subnet 255.255.255.0

  There must be no bridge and no dns configuration. Let the empty... or use the 192.168.1.1 address of the EA4500 (check the actual number of the ethernet configuration).

  Once you have the IP address it should work.

  Centuries ago, I wrote how to Mac installation... It's pretty close to the same for PC.

  Time Capsule using wired for Mac for backup only.

• strength of router

  I recently bought a new hp Pavilion wiith windows 8.je g6 laptlop have noticed lately the strength of my router is not as strong with this new laptop. The router is a Cisco Linksys WRT54G2 v1. Do ineedto upgrading to a new router and if so can I get a dose of recall for this router instead of upgradeing. Thanks Len

  Hi, Len

  It is difficult to say if replacing the router will improve the force wireless, but your router is obsolete and map your laptop Wireless-N Wireless.

  I recommend upgrade you to one of the new Wireless-N routers Linksys, so that your laptop can at least enjoy the faster connection.

  I am told that the antennas are better too (even if you don't see them on a Linksys).

  You will also need to use WPA2-Personal with AES encryption to use a Wireless N card to work on Wireless N speeds.

  I wouldn't take not less than this model, but which belongs to you.

  http://store.Linksys.com/routers/Linksys-E2500-advanced-DualBandN-Router_stcVVproductId129966526VVcatId554675VVviewprod.htm

  And if you want to spend more, then it would be a good choice.

  I have the E4200, which are older. Mine works fine.

  http://store.Linksys.com/routers/Linksys-EA4500-dual-band-N900-router-with-Gigabit-USB_stcVVproductId145330245VVcatId551966VVviewprod.htm

• Problem with the Wifi Smart device identification

  I have more than 20 devices in my network. Most with dynamic IP allocation. After you run the router for a while, it seems that names assigned device mixes and when I look at the list of devices and click on a specific device it will show a lot of MAC and IP addresses that belongs to him.
  Anyone else experience this behavior?
  It would be nice if it was possible to manually assign a name to a specific MAC address.
  It's the E4200

  This is a known bug.

  http://community.Linksys.com/T5/wireless-routers/EA6500-multiple-devices-under-one-device/TD-p/57231...

  http://community.Linksys.com/T5/wireless-routers/unknown-device-on-network-Linksys-EA4500/TD-p/50747...

• Cisco connect software for E4200V1

  Hi all

  Original and downloaded the software CiscoConnect E4200 is after installation relative to the EA4500 version and does not work with the E4200V1 router.

  Solved!

  A bit of logic did magic,

  The software for E4200V1 updated to version EA4500 which does not work for E4200V1, I thought that maybe update version mГЄlГ on the Cisco update server, so I downloaded E4200V2 witch software is the same as EA4500.

  I installed and the program started as Linksys EA4500, he updated and changed version E4200, hip and works!

  Kind regards

  ROLL GROOVER

• help with NAT 3 type

  How can I change my NAT type 3?

  I messed around on my secondary router and I googled a bunch with no luck saw the most people want to help change the 3 to 2.

  I know, I know, why would I want to change my NAT type 3? reasons lol

  can someone help me? My routers are connected LAN to LAN, I have a Linksys EA4500 as a secondary router, the main router I want to stay type 2 so that my efforts do not interfere with my brothers games.

  I finally, I plugged the 2 first routers Lan to Lan and the third I hung LAN to Wan, problem solved

• PLE400, PLW400 and WIFI Protected Setup network printer problems

  Hello

  Well, I have a router Linksys EA4500 with the PLE400 and PLW400 wireless Extenders wireless installed in my house. I put extenders using the utility-Cisco Powerline AV following the directions (same keyword static, PLW400 password entered in) and has increased the range of my router effectively. However, since I installed the PLE400 and the PLW400 I can't get WIFI Protected Setup to work on any of my wireless printers. I have two wireless printers Brother HL-2270DW who stopped working when I installed the extension and cannot be connected to the router, since then I use the WIFI Protected Setup. What the devil?

  I pressed the buttons to reset for 10 seconds on the PLE400 and the PLW400 and then set them to the top and still had the problem. Then I thought that maybe there are any available firmware updates. And there are so I updated the firmware on the PLE400 and the PLW400. Now, everything works fine. >.

• New technology on the EA8500 MU will benefit users with older technology

  I'm looking for some advice REGUARDING the new EA8500... If your not sure if your devices are supported on the new MU technologyt then

  1 - How can you check your devices to see if they support the MU technology which offers EA8500. ? And

  2. I guess because it is so new, that all my devices do not have this ability and if I'm right is there an advantage for me to upgrade to the new EA8500? I like the idea of the function (multi-user) and think that it would improve my put through, but I am running windows 7, several (I pads, I have Mac, IPad mini Apple air, several every years) as a smart TV AND SMART THERMOSTS. Running ON a linksys EA4500 and I've been jumping this new Ea 8500 migh speed things up a little bit for me. Also have a very slow ISP run 10 mbs

  Thanks for advice or technical knowledge that might steere me in the right dirrection

  BJT...

  Thank you very much for getting back to me so quickly... My current setup is mostly wireless with just the smart TV cable.

  the other devices are all wireless. The EA 4500 router in a back room unfournitureitly but I get good signals upwards to the second floor and given that my ISP only pushes 10Mps using my p/c desktop and a laptop computer sony running windows 7 and the two using a usb adapter type N 900 AE 3000 , pc tracks fairly quickly with no drop-outs... The problem seems to occure when I'm at the same level as the router using an I Pad air and Mini or 3rd gen.or an Apple laptop look old for many years. The answer is horrible... Although my I touch gen.will 6 same in thoes receive locations that the iPad and computer laptop air apple don't work well in. It seems that the Androids have the same proublem... Of course, the Smart connected TV works fine with no dropouts.

  Once again thanks for your time... And I'm going to start looking for the plug on the devices. I thought maybe a signal extender?

  PS I shared the concert using 5 g hz or 2.4 at different times and it doesn't seem to help... in fact when I try and choose or change of 2.4 g to 5 g Ipads don't see the 5 g on occaisions network a lot...

  BJT

• IPAD for HP CM2320 nf MFP Laser COLOR printing

  I recently bought an IPAD. I'm trying to print on the Laser jet CM2320 NF network.  The HP application prints a picture, but he asks an email on the IPad before you go before you print. Entry of users is not accepted. I don't know if the laser is "eprint" supporting. It offers a framework to accept emails however. Can I put this machine using the hp application to print? If not, is there a work around to print this machine in network.  Note the wireless router a linksys EA4500.  The printer is connected via Cat5 cable to the router.

  Find a better printer print no E successor of Finer print2 Presto. It is free to the user of the House allows her pinter HP to work perfectly until I is loaded into a computer on a network. Thank you for your help.

  Art B