Linux comments can contact other guests but not the default gateway.

Similar Questions

• I can print is more than a Web site. I can in other browsers, but not Mozilla. Help

  I used to be able to print any time I had to. Printing became so small that I couldn't read. Then the pages I printed out from the website, printed white pages. I contacted Thunderbird because it was first noticed on email when I tried to print something on a Web site, I was told that it was a problem of Mozilla. So I then tried to print directly from the Web site and got the same thing. Nothing. The page is completely blank when printing.

  These suggestions are not the problem and I contacted HP and they have run all diagnostics and they say that the problem is not with the printer or the software. Print all other browsers, but not Mozilla

• I have CS4 and changed computers.  He has not transferred and I want to know how to make so that it can be activated, I #but not the disk series. How do I do that?

  I have the CS4 and have changed computers.  He has not transferred and I wanted to know how have it activated. I have the serial number, but not the disk. How can I do this?

  install properly using the installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.3| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Can access virtual servers, but not the server host after vpn

  When on the network, I can access the host server and all other virtual servers (virtualized with virtualbox). But when I connect with VPN I have no access to the main server, but I have access to any of the host servers - and I can get access to the main server of one of the host servers.

  Where do I start looking?

  using of 5505 and asa version 8.4 is (2).

  The nat setup is like this:

  3 (inside) (outside) static source any any static destination NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 non-proxy-arp-search to itinerary

  translate_hits = 0, untranslate_hits = 0

  4 (inside) (outside) static source any any static destination NETWORK_OBJ_192.168.1.128_27 NETWORK_OBJ_192.168.1.128_27 non-proxy-arp-search to itinerary

  translate_hits = 0, untranslate_hits = 0

  5 (inside) (outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.254.0_28 NETWORK_OBJ_192.168.254.0_28 non-proxy-arp-search of route static destination

  translate_hits = 37, untranslate_hits = 63771

  6 (on the outside) to dynamic interface of the NET-VPNPOOL source (outdoor)

  translate_hits = 0, untranslate_hits = 0

  On the host, I see that you have 2 default gateways configured. It can have 1 default gateway, and to the other interface, you must configure static routes for specific access.

  The interface that needs to connect to the Internet should have the configured default gateway. The traffic that pass through the interface of the SAA should also go in and out the same set of interface, IE: If the host server connects to the interface via dmz out to the external interface, the return traffic must also go through this path, apart from the interface and return to the dmz interface.

• Tablet & mobile can see tabs office but not the other way

  Hello

  I have an android tablet, android phone, a laptop and a desktop computer at work. With firefox sync.

  I use aurora on laptop and desktop computer and beta on both android.

  On the desktop, I can only see the tabs of the laptop and on the laptop, one office.
  And on both android, I can see the portable and desktop tabs.

  In any case, I can't see two android tabs.

  Sync is ok because I can see desktop ones on the android but it is not as useful as it could be if I can't have all the tabs on each firefox, I can't read on my tablet or my office tabs previously open on the phone. I can see them in the history, though.

  Any suspicion on this subject?

  Sync for Android is not yet synchronize your tabs from your phone to the cloud. (See the bug 730039 if you are interested).

  It is coming in a future version of Firefox.

  Hope that helps!

• How can I only restore contacts and calendar but not the system after factory reset settings?

  Hello

  I have an iPhone 5.  I forgot the password of restrictions long ago and no backups prior to that date.  I want to do a factory reset.  How can I do this while keeping a copy of my contacts, notebooks, lists and schedules, so I can re - sync after the reset?  I don't want to re - sync system settings that my backup plays up and want to do a clean install of the main parameters.

  All advice appreciated.

  Chris

  You need to store your contacts and calendars on your computer or Cloud Computing service.

  AR you not do?

• Windows 8 can see windows 7 but not the other way around

  I have a desktop with windows 8 pro 64-bit computer and a laptop running Windows 7 Home Premium 64-bit.  They are both connected to the same workgroup.  Two computers can see and access my NAS who is also on the same network.

  My PC W8, I see the portable W7.  However, the W7 laptop does not see the PC W8.
  Both computers have their firewall disabled temporarily.
  The W8 PC has a homegroup Setup, but the W7 laptop does not see the residential groups on the network.
  I ran the two homegroup and the troubleshooting of network on the W7 laptop and it didn't detect any problems.

  Help?

  Hello

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-access-my-HomeGroup

• I can't get Firefox to play the horizons of music on the pages in browsers, it works in IE and other browsers but not firefox, HTML or Java script must also use so that they work?

  I'm having a problem with firefox, play background music on some sites, it works with IE and other browsers, but not with fire fox, what html script or java I must add to the pages so that they play music?

  I am developing my pages front page and I know the music only works on IE, so if someone can tell me how to fix this because it is important that I use fire fox as my main browser.

  Thank you in advance

  If a site uses BGSOUND so this will only work in Internet Explorer.

  BGSOUND is not compatible with other browsers like Firefox.

  • http://KB.mozillazine.org/Background_music_does_not_play

• Can print from other applications but not PS

  I'm trying to print from my Macbook Pro 2011 to a brother 2240 laser printer. I can print from other applications, but not of Socialist Party (CC 2014). In the preferences system, the printer shows as online, but in the PS print dialog box, when I click on the printer icon bit to the right of the selected printer, something of utility Brother appears and displays offlilne. But if I go to TextEdit I can print to the printer. Any ideas?

  Nuke your preferences to Photoshop and Photoshop to create new preferences files by pressing Command + Option + shift as soon as you launch Photoshop, keeping them pressed until you see a dialog box that you go click on Yes the force.

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• I can't get on my xbox account, I have email but not the password

  I can't on my xbox account, I have email but not the password, but that e-mail address is not locked on me trying to get up that I need to get on this account that soon ASP.

  Hello

  I suggest you to please follow the steps in the below link and check if that helps.

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/manage-Live-ID

  If the problem is not resolved, I suggest you please contact XBOX support for help.

  http://support.Xbox.com/en-us/contact-us?NavigationPath=/en-us/billing-and-subscriptions/account-security/password-protect-account

  I hope that helps!

• in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

  In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

  To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

  Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

  You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

  *********************

  You can also create groups if you send e-mail to the same people often.

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

• My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

  My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

  Belkin support for your model, for installation instructions.

  Your router will not appear in the devices

• I converted a PDF file to word.  Can I change the words, but not the page.  I can't change the margins. If I delete a picture of the page, space where the image is unusable.

  I converted a PDF file to word. Can I change the words, but not the page. I can't change the margins. If I delete a picture of the page, space where the image is unusable.  Can someone help me please? Gary

  Thank you, Gary!

  I appreciate your comments! Start with the basics: Getting Started with ExportPDF

  And here's a more complete step by step (that you already know, but I'll give the full game!):

  1. Sign in to your account on https://cloud.acrobat.com/exportpdf.
  2. Click on PDF files select export.
  3. Click on choose the files on my computer.
  4. Select one or more files and click on choose (you can select multiple files by pressing the Shift or Ctrl key when you click on the file).
  5. To convert to the: menu popup, select the output format you want (in this case, Microsoft Word).
  6. Let the language of the local menu Document configured to English (unless the PDF is in a foreign language).
  7. Click Export to Word. (The name of this button will vary depending on what format you selected in step 5)
  8. Once the file is converted, it will appear at the bottom of the window, listed under exported files.
  9. Hover your mouse over the thumbnail image of the file, and then click the icon that appears on the left side of the thumbnail to download the file in your downloads folder. (You can also click on the files tab in the upper part of the window to see a complete list of all converted files).
  10. Once you have downloaded the file, you can open it up in Word for editing.

  I hope this helps! If this isn't the case, you know where to find me!

  Best,

  Sara