Linux host freezes with 10.0.6 Workstation and Windows 7 comments

Similar Questions

• Very slow network with 10 Workstation and Windows 8 / 8.1 Windows

  Hello

  I come to you because I have a problem with the network with 10 Workstation and Windows 8 / 8.1

  In fact, if I copy files from or to a virtual machine with my host of Windows 8 by sharing Windows (SMB / CIFS), it is very very slow and unusable.

  Example: My host is a Windows 8 x 64 and Windows 8 x 64 host: transfer speed is about 100 or 200 KB/s and often 0 KB/s (transfer seems to be paused).

  With a guest Windows 8.1, same problem.

  After many tests, I also tried with Windows PE 5 (same kernel as Windows 8.1): same problem, unusable.

  But, miracle, if I use "Utility MSI - X OFF" Intel, I reboot and the problem disappears.

  There:https://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng & DwnldID = 18946

  Someone in this community, said that it have the same problem and a workaround solution was not to use Intel e1000e but e1000 then: I must admit, it works.

  With e1000, speed is around 30 to 60 MB/s and stable.

  But, by default, 10 Workstation e1000e value when I create a new VM Windows 8.1, so it's a problem... Do not manually change for each new virtual machine and explain this to my students.

  Please, you can reproduce this bug and fix it?

  Thank you very much.

  New workstation 10.0.2 fixed this bug. Perfect.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Problems scanning with c6150 all in one and Windows 8

  I have a new touchsmart from HP running Windows 8. I have an old printer c6150 all in one. I downloaded and installed the latest software and drivers for 64-bit Windows 8.

  I feel, copy and fax without problems. But when I try to scan, it freezes. It starts to scan and then just stops responding. I have to use Task Manager to quit the program. I tried the scan doctor and he says that there is a driver problem and it cannot communicate with the printer.

  Help, please.

  I solved the problem. The USB cable from the printer was not quite long enough to reach the back of my all in one computer, so I bought a USB extension cable. That works fine for normal printing, but apparently only works well for scanning.

  Once I connected the printer directly to the USB port on the computer, the scan function worked normally.

  Emilio

• VMWare Workstation and Windows 7 64 bit

  Someone had problems with VMWare Workstation running Windows 7 64 bit? My computer hangs when creating the virtual machine guests. I also have VirtualBox running very stable with Windows 7. I was wondering if anyone has had problems? VMWare has a new version of 7 who suppose to be stable with Windows 7. I am skeptical. Your comments are welcome.

  "There is a time and place for that. The time is... Never. You can figure out the place on your own.

  I have no problem with VMware Workstation 7.0.1 build 227600 and Windows 7 Ultimate edition. It works like desingned.

• 3 USB host Windows 8.1 and windows 7 comments

  I can't get my VMs invited to recognize my USB 3 drives when connected. What I've read, this combination should work, as I have the Generic USB xHCI Host Controller driver installed in the Windows 8.1 home, but I can't get the USB 3 virtual VM driver to install on the host.

  I stop the host, passed under USB 2.0 to 3.0 and restarted with and without a USB 3.0 drive connected to the prompt and tried to update the existing USB host controller driver in the guest (there are only same drivers). I reinstalled VM Tools in the prompt (there is no entry for USB3 pilot in options?).

  Is there a driver I can install in the prompt to get the USB 3 support, or am I wrong in my reading of the various KB articles on USB 3 compatibility, and it's only Win 8.x guest on Win 7 host OS access USB3?

  See you soon

  USB 3.0 for Windows 7 comments support is not currently supported.

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• S10 - 3T with UNR Ubuntu 9.10 and Windows 7

  Hello!

  I installed UNR 9.10 on my S10 - 3T, however, when I tried to install Windows 7, the installation program does not have the 'readers' in my netbook. He asked the drivers.  I have provided the drivers supplied by the drive D and that I copied it to my flash drive, but it is not visible all the drivers.

  Now, I'm stuck with Ubuntu.  How can I install Windows on one operating system existing Ubunto? Or, how can I format it clean so that I can install it costs.

  Thank you

  rdamontz

  I started from a flash drive with Ubuntu as an operating system and deleted all partitions of my in my hard drive.  I have created a new and format it in NTFS.  When I installed Windows 7, he finds my hard drive and was able to do a fresh install.

  Ubuntu has messed with the boot loader that causes Windows does not see.

  I am now running Windows 7 Ultimate and Ubuntu UNR, but I used the WUBI Installer.

• Information about the host material with information on the nic and HBA drivers

  Can someone help me complete the script below. I can't able to get information from HBA and driver for the card.

  
  Get-Datacenter | % {  
    $datacenter=$_
    Get-VMhost -Location $datacenter | Get-VMHostHBA -Type FibreChannel | where {$_.Status -eq "online"} | 
    Select @{N="Datacenter";E={$datacenter}},@{N="VMHost";E={$_.VMHost.Name}},@{N="HostName";E={$($_.VMHost | Get-VMHostNetwork).HostName}},@{N="ver";E={$_.VMhost.version}},@{N="Manf";E={$_.VMhost.Manufacturer}}, @{N="Hostmodel";E={$_.VMhost.Model}},@{Name="SerialNumber";Expression={$_.VMhost.ExtensionData.Hardware.SystemInfo.OtherIdentifyingInfo |Where-Object {$_.IdentifierType.Key -eq "Servicetag"} |Select-Object -ExpandProperty IdentifierValue}},
    @{N="Cluster";E={
          if($_.VMHost.ExtensionData.Parent.Type -ne "ClusterComputeResource"){"Stand alone host"}
          else{
              Get-view -Id $_.VMHost.ExtensionData.Parent | Select -ExpandProperty Name
          }
        }},Device,Status,@{N="WWN";E={((("{0:X}"-f $_.PortWorldWideName).ToLower()) -replace "(\w{2})",'$1:').TrimEnd(':')}},@{N="HBA Model";E={($_.VMhost | get-vmhosthba -Type FibreChannel | where {$_.Status -eq "online"} | select-object -ExpandProperty Model  ) | Get-Unique}},
        @{N="fnicdriver";E={$esxcli.software.vib.list() | ? {$_.Name -match ".*$hbadriver.*"} | Select -Expand Version}}
        @{N="Fnicvendor";E={$esxcli.software.vib.list() | ? {$_.Name -match ".*$hbadriver.*"} | Select -Expand Vendor}},
        @{N="enicdriver";E={$esxcli.system.module.get("enic").version}}
       @{N="Enicvendor";E={$esxcli.software.vib.list() | ? {$_.Name -match ".$net.*"} | Select -Expand Vendor}}
  } 
  
  

  Thank you correct me with your previous posts, I had made some changes to get information on the correct provider for FC and network cards, now it's show desired output.

  Get-Datacenter | % {
        $datacenter=$_
        foreach($esx in Get-VMhost -Location $datacenter){
          $esxcli = Get-EsxCli -VMHost $esx
          $nic = Get-VMHostNetworkAdapter -VMHost $esx | Select -First 1 | select -ExpandProperty Name
          $hba =Get-VMHostHBA -VMHost $esx -Type FibreChannel | where {$_.Status -eq "online"} |  Select -First 1 |select -ExpandProperty Name
          Get-VMHostHBA -VMHost $esx -Type FibreChannel | where {$_.Status -eq "online"} |
          Select @{N="Datacenter";E={$datacenter.Name}},
                  @{N="VMHost";E={$esx.Name}},
                  @{N="HostName";E={$($_.VMHost | Get-VMHostNetwork).HostName}},
                  @{N="version";E={$esx.version}},
                  @{N="Manufacturer";E={$esx.Manufacturer}},
                  @{N="Hostmodel";E={$esx.Model}},
                  @{Name="SerialNumber";Expression={$esx.ExtensionData.Hardware.SystemInfo.OtherIdentifyingInfo |Where-Object {$_.IdentifierType.Key -eq "Servicetag"} |Select-Object -ExpandProperty IdentifierValue}},
                  @{N="Cluster";E={
                      if($esx.ExtensionData.Parent.Type -ne "ClusterComputeResource"){"Stand alone host"}
                      else{
                          Get-view -Id $esx.ExtensionData.Parent | Select -ExpandProperty Name
                      }}},
                  Device,Model,Status,
                  @{N="WWPN";E={((("{0:X}"-f $_.NodeWorldWideName).ToLower()) -replace "(\w{2})",'$1:').TrimEnd(':')}},
                  @{N="WWN";E={((("{0:X}"-f $_.PortWorldWideName).ToLower()) -replace "(\w{2})",'$1:').TrimEnd(':')}},
                # @{N="Fnicvendor";E={$esxcli.software.vib.list() | ? {$_.Name -match ".*$($hba.hbadriver).*"} | Select -First 1 -Expand Vendor}},
                  @{N="Fnicvendor";E={$esxcli.hardware.pci.list() | where {$hba -contains $_.VMKernelName} |Select -ExpandProperty VendorName }},
                  @{N="fnicdriver";E={$esxcli.system.module.get("fnic").version}},
                  @{N="enicdriver";E={$esxcli.system.module.get("enic").version}},
                 # @{N="Enicvendor";E={$esxcli.software.vib.list() | ? {$_.Name -match ".net.*"} | Select -First 1 -Expand Vendor}}
                   @{N="Enicvendor";E={$esxcli.hardware.pci.list() | where {$nic -contains $_.VMKernelName} |Select -ExpandProperty VendorName }}
                   #@{N="Enicvendor";E={$esxcli.network.nic.list() | where {$vmnic.name -eq $_.vmnic1} | select -First 1 -ExpandProperty Description }}
          }
      } 
  

  =================

  Output:

  -------

  

• 9 workstation and Windows 98 crashing host

  MY computer is Windows 8 RTM and 9.0 Workstation

  When you try to create a new Win98 machine and trying to turn on a Win98 machine I was using with Workstation 7 my computer abruptly restarts.

  When trying to create a configuration of the new machine 98 says check your computer checks on 5 or 6 items successfully and on the next screen restarts before one can read what is said.

  It is probably a bug in Workstation 9 about the SMEP on Ivy Bridge systems.  Go to VM->-> processors, settings and change the execution mode privileged of Intel VT-x/EPT.

• Programs freeze with Fusion 2.0.5 and XP sp2

  Hi-

  Similar to a previous post re: Dragon, I constantly have a problem with several freezing programs ("not responding") whenever I run them in XP sp2 in Fusion 2.0.5 (using Mac OS X v 10.5.7) the only way to get out of it is to force stop merger. My feeling is that it is a Windows problem, but no physical evidence. Programs that freeze include Quickbooks 2009, Sound Forge. Everything works SLOW. When you try to stop the merger, I get an error message that a script has failed.

  I think I want to completely get rid of the merger, XP and all responsible for programs on a virtual computer and do a clean install on the whole. Question - if I use the application to uninstall in Fusion, it get rid of all the associated programs and recover disk space?

  This file is the entire virtual machine.  By deleting this file, you delete all that it contains, including all programs.  When this file is gone, there will be no trace of your VM of windows on your computer.  Although, as I said just make sure to save all the files you want.

• With the help of Parallels and Windows OS

  When running Parallels do I also need to install an operating system Windows on my Mac or Parallels come with him so I can run a windows application?

  You need to install windows inside parallels. If you need a valid license of windows.

• Problem with the HP Pavilion Bluetooth and Windows 8.1

  I have a new HP Pavilion (approximately 6 weeks) 15-n205AX running windows 8.1.  Can I connect my android phone with it, but when I try to send a picture from phone to the laptop it says failed to connect.  (But I can do okay on my old laptop so doubt the problem is the phone).  I removed the device and re-paired several times, apparently successfully, but still cannot send pictures.

  Any thoughts?

  Hi NellyG. I understand that your Bluetooth will pair, but fails to connect when you try to send a photo. Read this for tips or tricks for using Bluetooth: Bluetooth (Windows 8) devices use.

  Let me now if this is useful.

• Help with a printer HP Photosmart and Windows 7

  I have an old HP photosmart 1000 printer and try to install the driver for my Windows 7 operating system.  Previously, using HP Office informed me install HP 760Cse driver to print with Vista OS and it works very well.  This time however, with OS Win 7, I manually installed the HP 1000 driver and the 760Cse HP and the printer is still not functional.  Help, please!

  Hi leebc,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmart 1000 using this driver. I would like to know if you have the same problem?

  

• XP Home SP2; Currently installed with IE8, Live Essentials, MSE, and Windows Defender...

  I have reistalled my XP Home of authentic CDs and subsequently I was only able to download Windows updates. However, after I received your response referring to download related problem with IE8, MSE Live Essentials. Well, I downloaded MSE, but it cannot download the updates because it fails to update due to internet connection failure. I also downloaded Windows defender, but it says "the program cannot check the updates of definitions. It has an error code 0 x 80004002. Even after trobleshooting with 'Fix' and 'fix the problem with Microsoft Windows Update' he says it doesn't, 'window could not help solve the problem. Finally, I'm not yet able to download Windows updates. I get the following message, "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem, etc., etc... Given that I'm unable to download Windows updates and therefore SP3, MSE will never be installed. So please help.

  Try this {deleted} and let me know if no effect

  What he does is a reset of the stuff that makes your windows update also works, you don't need to do the updates of windows to get SP3 the link below will take you to this http://www.microsoft.com/en-us/download/details.aspx?id=24