3 USB host Windows 8.1 and windows 7 comments

Similar Questions

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  People,

  Hello. I use 3 Player VM and Guest OS Windows Server 2003. The host OS is Windows 7. I need to increase the size of the VM disk, so who can install several systems in the guest OS. Before you increase the size of the virtual disk, I need to back up the virtual machine hard disk external. It is to copy and paste the "C:\VirtualMachine\" folder in the hard disk external.

  I just bought an external hard drive that is "Western Digital My Passport Essential 500 GB USB 3.0" and its software is "WD SmartWare". It seems that the software can back up the entire hard drive only. Alternatively, the backup files by selecting the types (music, photo, document, movies). But can not save a folder "C:\VirtualMachine\".

  So my question is: what brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  These two questions do not apply if you have a virtual machine.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• 1 program still needs to be closed: (waiting for) task host window's task to stop execution and stopping tasks that are already running

  While the closure of the pc I got the message: "1 program still needs to be closed: (pending of) task host window's task to stop execution and stop tasks that are already running".but there is no program running and I have to force it to close.how to solve?

  Hello

  Thank you for contacting Microsoft Community.
  Windows, then closing, checks all open programs. If there is, it sends a request for the program to close and wait until the program closes safely, to avoid any loss of data. But, Windows is waiting for some specified
  If you are sure that none of the programs are obviously open, you can try the following steps:
  Press Windows key + r, Type regedit and pres enter. If UAC prompts, click Yes. Go to HKEY_LOCAL_MACHINE-> expand System-> expand CurrentControlSet-> click on command (exapnd no do this). When you click (or select) control, you can see WaitToKillServiceTimeout. Double-click it to change the value. Set the value to 500 or less than that. Click Ok, and then close the registry editor. Now, restart the PC. If the problem persists, stop and try again and check.
  Be careful with registry access as incorrect values or remove the unknown keys can prevent Windows to start and it will fix it.
  Response if the issue is not resolved.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Stop and restart prevented by the task host window

  Hello world.

  I'm having currently a problem each time I try to shut down or restart my laptop. I have the following message:

  «Closing 1 app and restart»
  Task host window
  Task host stops background tasks.

  Windows cannot close it, and I'm finally started on the desktop, but with all my applications closed and even some features of pilot missing (for example multitouch). I can't use the Task Manager as it crashes whenever I open it. By clicking on "restart still" does not resolve the issue and I think that causes a crash (cannot be 100% sure, only tried once).

  Does anyone have any suggestions? I am pleased to provide you with more information if necessary.

  Hello

  Try this, it worked for me.

  1:

  Run the Troubleshooter:

  Follow the steps below:

  (a) press Windows + W together.
  (b) writing Troubleshooting in the search to the corner box and press on enter.
  (c) click the Troubleshooting tab.
  (d) click view all in the upper left corner.
  (e) select the power options in the list.
  (f) click Next to launch the troubleshooter of power.

  Go to the next method if the problem persists.

  Ref: http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/problems-with-windows-8-not-doing-what-it-is/9ad39bdf-ad5a-435d-a393-3b27507da5a4

  2:

  Put the computer to boot and search for the issue.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Reset to start the computer to a normal startup.

  Browse the event viewer for the cause of code and the exact error number:

  Press the Windows key + X and click on event viewer and follow him.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

• How to configure the network between the host (Windows 8) and Guest (Linux)

  Hello

  I am trying to configure network between the host (Windows 8) and Guest (Linux). Guest on VMware Workstation 8.

  Using this network, I want to configure putty so that I can access comments linux to a PuTTY that is installed on the host (Windows 8).

  Thank you.

  Abdul

  To obtain external access to comments (access the guest from the host), you must configure the IP static within the guest (Linux) as below and restart the network (service network restart)

  eth0 is a dynamic IP (DHCP) to get wireless internet access

  eth1 is a static IP address

  

  

• Workstation Pro 12 will be not client 32-bit Vista autofit then resizes of the host window

  I use 12 Pro Workstation on Windows 7 64 bit.

  I had a VM Vista 32 - bit desktop 11 step, I had put for the prompt automatically resize to fit the host VMware window.

  I upgraded to Workstation Pro 12, open the virtual machine and updated for compatibility of 12 jobs. I started it up and everything was fine with the resizing as a guest before to match the host window.

  Then, I've updated the VMware Tools. And now, if I resize the window host VMware, Vista clients sound USB connect/disconnect bongs, and after a few seconds, the host window snaps back to its previous size.

  It is the only VM 32 bits that I have, but with Windows 7 64-bit and Windows 8.1 VMs version 12 VMware Tools work very well and comments autofit works exactly as it did before.

  All work around (other that the no upgrade VMWare Tools)?

  Thank you

  Alan

  Same thing happened for me (Vista 32-bit). Same guest machine worked well with Workstation 8 but update to hardware of Pro 12 caused the automatic adjustment to stop working for this particular machine. Windows 10 and Windows 8 virtual machines work fine.

  Interestingly, I found that disabling the hardware acceleration of 3D (under the virtual computer screen settings) solved the problem for me - which is something I had to do to solve another problem I had. Not sure if you have improvements 3D accelerated or not, but it can be worth it.

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• NI USB - 8473 Windows can't find a driver

  After I installed my software CAN 2.6.1 and connect my USB device, Windows starts the Hardware Wizard but can't find the drivers for this device.  I started with 2.4 and uninstalled and reinstalled it which didn't help, and then I upgraded to 2.6.1.  This does not help either.  My impression is that it's something to do with Windows or the computer, but I thought I would ask if anyone has seen this problem before, where it's a hardware or software problem.

  Hello

  Thank you for your message.  The NI-CAN driver is an INF called nican.inf.  Instead of automatically detected the driver in the new hardware wizard found, try accessing the file nican.inf.  This file is located in the following directory: C:\Program NIUninstaller Instruments\NI-CAN\staging.

  If this does not work, I only run the following the link Microsoft Windows Cleanup utility and remove all records of NI-CAN of your system and then reinstall the driver once more.

  http://support.Microsoft.com/kb/290301

  Kind regards

  Todd v.

• Cann't envy 15 detect the drive optical usb in windows 8

  Hello

  I just bought a Touchsmart Envy 15-J117TX 2 days ago. I have a problem of connecting a player optical usb to my laptop.

  I don't know why the DVD player does not show in my computer! and I do not see in the Device Manager, CD-ROM/DVD-ROM drives?

  Could someone kindly please help?

  Kind regards

  BTran

  Hi BTran,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you are having problems connecting to an external optical drive. I have included a document HP below with a few troubleshooting steps to try.

  Troubleshooting USB connections Windows 8

  Thank you

• Formatting the USB in Windows XP disk, create a folder "system volume information" How can I overcome this problem

  Hello team, I tried to format my 2 GB to Format NTFS USB in WINDOWS XP. When I format the drive, it has been formatted sucssfully, but in the formatted disk, a folder is created named as 'System Volume Information '. I tried to remove my USB drive safley but it show and error as "the generic Volume is used in another program... '. ».  Why this happens, the 'System Volume Information' folder is a virus? How can I fix this problem... reply me as soon as possible... Thank you all...

  Hello

  It does seem like a virus. Since you're a NTFS format, it should be a system folder. System folder is present on NTFS volumes and is used for system restore points.

  If you want to remove, you may need to format the drive to FAT32.

  See also:

  Access to the System Volume Information folder
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;309531

• Device not recognized-to USB using Windows XP (sp3)

  The camera is on, I did not USB drive internal or external, the USB cable is a direct connection with the camera and the computer. I am running windows XP; I even tried on another laptop and at the end upward with the same message-USB device not recognized! This could be a software problem on the camera, or a bad set of USB cables? The camera is 2 years old and the cable have used about 6 times to transfer photos from the camera to the computer. When I tried on another laptop I got the following message: not properly installed device driver software! Is there a solution to this problem?

  Hi RigoSantiago,

  Follow these methods.

  Method 1: Install the drivers for the camera and associated software. Also, see the manual for more information.

  Method 2: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  USB devices that are disconnected and then reconnected to a USB hub may not be detected on a Windows XP-based computer

  http://support.Microsoft.com/kb/920875

  For reference:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

• I just imported videos by usb using windows, but now I can't find it on my computer

  original title: import videos

  I just imported videos by usb using windows, but now I can't find it on my computer

  Could they be in your Documents folder or in your folder my videos?

  If you know the format of the video files... MOV, .mpg, .avi for example...
  Do a search for this position, and perhaps you will find the files.

  (308895) how to search for files and folders in Windows XP
  http://support.Microsoft.com/kb/308895