Linux + pci aironet 350 + PEAP?

Similar Questions

• What specific frequency is a bridge (802 .11b) wireless aironet 350 grave?

  Hello

  I would like to ask what specific frequency, a bridge (802 .11b) wireless aironet 350 fall?

  This will serve as a requirement on a permit from the Government that I am processing. I was invited by the Govt. Department of communication on what specific frequency band 2400-2483, 5 MHz is aironet 350 fall.

  Any inputs on this is much appreciated.

  Kind regards

  udimpas

  Depend on the chain located on the bridge. 802 11 b (as g) to 11 frequencies in the United States.

  2412 Mhz, 2417, 2422, 2427, 2432, 2437, 2442, 2447, 2452, 2457, 2462.

  2412 is channel 1, 2437 is channel 6, 2462 is channel 11

• Unable to access internet from the Windows client on the Linux host

  Host: Arch Linux, x 86-64, kernel 4.1.6

  I installed VMWare Workstation 12 on my Linux host and the installation seems to complete without any errors.  However, during the compilation of the modules of the core, a few warnings (which I think are safe to ingnore appeared).

  sudo modconfig vmware - console - install-all

  [sudo] password for ffhaddad:

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  do: enter the directory "/ tmp/modconfig-cR61EP/vmmon-only '.

  Using the kernel build system.

  / sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-cR61EP/vmmon-only/vmcore/moduleloop.o

  /tmp/modconfig-cR61EP/vmmon-only/Linux/driver.c:1285:1: warning: always_inline function might not be inlinable [-Wattributes]

  LinuxDriverSyncReadTSCs(uint64 *delta) / / OUT: max - min TSC TSC

  ^

  LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  CC /tmp/modconfig-cR61EP/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  / sbin/make - ch. $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.

  make: entering directory ' / tmp/modconfig-cR61EP/vmnet-only»

  Using the kernel build system.

  / sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/driver.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/hub.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/userif.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/netif.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac.o

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetEvent.o

  In file included from include/linux/pci.h:35:0,

  of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.

  from /tmp/modconfig-cR61EP/vmnet-only/netif.c:43:

  include/Linux/pci_ids.h:2251:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined

  #define PCI_VENDOR_ID_VMWARE 0x15ad

  ^

  In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,

  of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.

  from /tmp/modconfig-cR61EP/vmnet-only/netif.c:42:

  /tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: Note: this is the location of the previous definition

  #define PCI_VENDOR_ID_VMWARE 0x15AD

  ^

  CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetUserListener.o

  In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,

  of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.

  from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:52:

  /tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined

  #define PCI_VENDOR_ID_VMWARE 0x15AD

  ^

  In file included from include/linux/pci.h:35:0,

  of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.

  from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:51:

  include/Linux/pci_ids.h:2251:0: Note: this is the location of the previous definition

  #define PCI_VENDOR_ID_VMWARE 0x15ad

  ^

  LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  CC /tmp/modconfig-cR61EP/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'

  / sbin/make - ch. $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-cR61EP/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.

  Starting VMware services:

  Virtual machine monitor makes

  Virtual machine communication interface is

  VM communication interface socket family is

  File system is blocking

  Virtual Ethernet is

  Demon of authentication makes VMware

  Available shared memory is

  When I type lsmod | grep vm, I see the module running:

  57344 13 vmnet

  
  

  When I type: status vmware.service, I get:

  VMware.service - demon of VMware

  Load: loaded (/ usr/lib/systemd/system/vmware.service; activated; seller preset: disabled)

  Active: active (left) from the sea 2015-08-26 14:45:22 PDT; 1 h 14 min ago

  Process: departure from ExecStart=/etc/init.d/vmware 323 (= released, the status code = 0/SUCCESS)

  Main PID: 323 (code = released, State = 0/SUCCESS)

  CGroup: /system.slice/vmware.service

  August 26 at 14:46:21 silverstone vmnet-dhcpd [718]: 00 DHCPDISCOVER: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPOFFER on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPREQUEST for 00 172.16.156.128: 0C: 29:05:cc:e2.... se8

  August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPINFORM for 00 172.16.156.128: 0C: 29:05:cc:e2 v..et8

  August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8

  August 26 at 14:52:31 silverstone vmnetBridge [589]: stop bridge eno1 to virtual network 0.

  August 26 14:52:34 silverstone vmnet-dhcpd [695]: select: interrupted system call

  August 26 14:52:34 silverstone vmnet-dhcpd [695]: get out.

  August 26 14:52:34 silverstone vmnet-dhcpd [718]: select: interrupted system call

  Note: Some lines were ellipsized, use-l to show in its entirety.

  
  

  All this leads to the issue of not being able to access the internet from within my Windows guest.  I can ping the host computer, but I can't access the internet.  I'm not sure of what could be the problem.

  I pulled up to the parameters of the virtual machine window (Ctrl + D), selected network adapter in the list of devices and changed the ball from NAT to bridged. After you save the settings, I booted the machine virtual Windows has detected a new network adapter, and after you configure it, I am able to access the internet.

• Wpc300n drivers

  Hello

  Anyone know if I can download drivers anywhere for the WCP300N to run under Windows CE 4.2?

  Just bought one of these units at very low prices in a local store!

  Concerning

  John

  Thanks for this Wizzard.

  He returned today and got refund...

  found a Cisco Aironet 350 PCMCIA card and get that, soon, still very good once walked.

  I know I can get the drivers/software for that one at least! -just do not know which ones I need, been on the Cisco website, find the section of the driver, but for me, its labyrinth...

  Thanks again

• Terminology of Cisco's wireless

  Hi all.

  Could you explain the differences between:

  ACU

  ADU

  NAVY.

  More I read and the more I get confused.

  I've heard that:

  ADU is for a couple of CB21AG and PI21AG PCMCIA card.

  ACU is designed to allow the other couple of card PCMCIA Aironet 350, and CB20A.

  ADU & ACU also include software drivers?

  What is the beewen plus/minus the ACU and ADU?

  If they do the same job, why call it in different ways?

  What is the meaning of these cards? The PC have now built-in wireless...

  As for NAVY?

  Thank you very much.

  Giorgio.

  It is an administrative tool to create profiles

  http://www.Cisco.com/en/us/docs/wireless/wlan_adapter/CB21AG/Admin/2.5/a...

  Sent by Cisco Support technique iPhone App

• Several methods to access authenticated by RADIUS box

  I am trying to configure a number of different access methods all to be authenticated by the same ACS server. Basically, I want to be able to authenticate users on the level of exec of switches on the management UI http for some Aironet 350, on the network through the Aironet 350 or the network through some 1721 connection in a 3745.

  I want to be able to control access to each of these methods through the AD groups with are then mapped to groups within the ACS.

  I have authentication on a test switch works well, so I know that the ACS to the AD process works correctly.

  Thank you

  Hello

  Seems good... you can pass the same Test switch and to implement in the production network.

• PCI-6514 ignored supported in Linux drivers?

  Hello

  I noticed that the NOR-DAQmx base package includes no support for the PCI-6514 Board. Why is this? There are chances that it will be added in the future? NOR-DAQmx 8.0.2 becomes a bit long in the tooth, but it has support for the 6514.

  Hello

  DAQmx base is primarily intended for OS X and Linux operating systems. Given that the majority of our customers use Windows, and there is a limited amount of development resources, not all of our cards are suppprted on other operating systems. There is a chance that it could be added in the future, but I'm not aware of any current project to test this card with DAQmx base. If you have a Windows machine, you can always use the latest version of DAQmx to communicate with this card. I hope this helps!

• Compatibility of Linux NOR PCI 7851R

  Hi y ' All!

  I take into consideration this based FPGA Board to make digital acquisition/generation, plug it into a location PCIe to a PC running LabVIEW for Linux in a Red Hat environment.

  The data sheet of the "NI R series Multifunction RIO", it's the series in which this Council falls, does not list Linux in the paragraph "needs and compatibility." only several Windows OS.

  However, the description of the "NOR-RIO drier 14.0 for Linux" (which is the one used for this Board) mentions clearly PCI-7851R in the list of supported devices.

  Find these two statements a bit confused, I ask you if this material is actually compatible Linux.

  See you soon!

  Hi, as explained in RIO for Linux (http://www.ni.com/download/ni-rio-14.0/5027/en/) driver:

  14.0 driver NOR-RIO for Linux provides Runtime support for devices OR RIO Scientific Linux 6.x, Red Hat Enterprise Linux 6.x and 7.x and openSUSE 12.x and 13.1. Please see the file Readme for the full operating system supported.

  This means that you can use the card PCI 7851R in a Linux OS computer is compatible such as Red Hat Enterprise.

  Good day

• HP G62t-350: PCi Simple Communications Controller driver

  Hello

  I just be reformatted my HP G62-350 with the same Windows 7 Home Premium and now I have a driver to the left to find, and it is difficult. It is for the controller PCI of communication Simple. I'll include the hardware ID:

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1425103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1425103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  There is very limited information that is given to me, so I hope someone here can help you!

  Thank you

  Austin

  Hello

  Intel Management Engine Interface (MEI)

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52191.exe

  Concerning

• Is a PCI-6120 card in a computer with linux useful for the analog output?

  We have a PCI-6120, and we want to use in a computer with linux OS, to the analog inputs and analog outputs.  I have downloaded the driver NOR-DAQmx Base 3.2 for linux, and in the file README.txt only analog input is mentioned for this Council. It is possible to use this card PCI-6120 in linux, with output and analog input computer?

  Best regards

  Hey, Gallas,.

  This line in the README file simply refers to the PCI-6120 by its more popular, analog input subsystem (given that it is a simultaneous sampling device, the AI is the most commonly used subsystem). But NEITHER-DAQmx for Linux does not have the same limitations NOR-DAQmx base has. In other words, it supports the ability of analog output on the PCI-6120.

  Kind regards

  Sam

• HP 350 G1: Missing PCI device driver

  Hello, I bought my HP 350 G1 a few days ago, and after installing all the drivers that I need your Web sites, I still have a missing driver when I open the device, "PCI Device" Manager.

  Is the hardware ID of the device:
  PCI\VEN_10EC & DEV_5227 & SUBSYS_21B7103C & REV_01

  I am using Windows 7 Ultimate 64-bit.

  Can you help me find the correct drivers for this device?
  Thank you in advace

  Hello

  Should be the driver of player card on the link below.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6709431&swItemId=ob_126994_1&swEnvOid=4059

  Kind regards

  DP - K

• PCI-Gbspecifications installation on Redhat Enterprise Linux 5

  Hello

  I tried to install the beta version of the software for the PCI-GPIB on Redhat Enterprise Linux 5 card.  Has anyone managed to do this?   I get an error message indicating that I need to install the package kernel-source to continue.  I did it by installing the package kernel-devel and kernel-head, but still receive the same error messages. I also tried to make a version of Redhat of the answer to Q5 in the Readme for this software, but again without success.  Someone can please help me out (and don't forget that I'm still pretty new to linux administration).

  Hello

  The actual error message said I'd need the kernel-source package to continue (I thought I had).

  In fact this morning I turned on the computer and just tried again, and it worked.  So somewhere between the kernel-devel/kernel-header download, try suggests SUSE difficulty in the readme file, and install the complete kernel as non-root sources (suggested by another linux forum), fixed it.

  Thank you very much!

• Linux drivers NOR PCI-7332

  Hello

  I'm looking for options to interface with the NI PCI-7332 of g ++ LInux. I found links to the SystemSynergy drivers, but they do not seem to support Linux more.

  Linux support exists? If there is no support for Linux, I can code Linux driver myself, if I get access to the documents of description of material (I'm familiar with operations of PCI bus driver Linux issues).

  Kind regards

  Petr Kubanek

  Institute of physics, Academy of Sciences of the Czech Republic

  Hi Peter,

  I'm not sure I understand your question. For my part, I downloaded the Motion DDK and I managed to open the help file, and it seems that all the links work in the help file, as you can see in the attached photo.

  Could you explain more what that didn't work for you?

  Kind regards

  Barna

• Linux for USB/PCIe/PCI drivers

  HI -.

  I'm developing a linux based real-time (using Ubuntu and scientific Linux) platform that uses multifunction Renault or (series E and M). So far, we used sets driver open source such as COMEDI (from RTAI) and analogy (from Xenomai) to interface with these cards, however the latest maps of the X series are not supported by one of them - and development seems to be to a halt.

  I was wondering if NEITHER provides a driver based on linux for these cards. If so, is there a list of cards that it supports?

  Thank you.

  yapatel wrote:

  HI -.

  I'm developing a linux based real-time (using Ubuntu and scientific Linux) platform that uses multifunction Renault or (series E and M). So far, we used sets driver open source such as COMEDI (from RTAI) and analogy (from Xenomai) to interface with these cards, however the latest maps of the X series are not supported by one of them - and development seems to be to a halt.

  I was wondering if NEITHER provides a driver based on linux for these cards. If so, is there a list of cards that it supports?

  Thank you.

  If you are thinking of materials of the X series, offers of OR support only Linux is through a driver based on the sources, the DDK [1].

  In addition to the source code, the DDK also includes documentation on the registers, bit fields and principle of operation for the capabilities of the device.

  The DDK shows how you program a hardware DAQ on any OS. Note that this is different from how you would create a DAQ for any OS driver. In other words, the DDK wants to show what records and fields of the piece in the program and in what order they should be programmed so that they can properly control the hardware. The DDK is not a reference architecture for the driver and kernel programming, but over as executable documentation.

  [1] measurement Hardware Driver Development Kit (DDK) fair questions
  http://digital.NI.com/public.nsf/allkb/2D93070A3DDEFD7186256C59007289E6

• HP 350 G1: Lack of Driver: PCI Simple communications controller

  Hi, I seem to be missing a pilot (he has yellow exclamation point in Device Manager) for my laptop for

  "PCI Simple communications controller", ID of equipment as follows:

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_21B7103C & REV_04
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_21B7103C
  PCI\VEN_8086 & DEV_9C3A & CC_078000
  PCI\VEN_8086 & DEV_9C3A & CC_0780

  Where can I download from?

  Any help will be much appreciated.

  Kind regards

  Polly.

  Hello

  Please try:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6709441&IDX=&swEnvOID=4059&action=driverDocument&itemLocale=&swLang=&swItemId=ob_126818_1&mode=

  Kind regards.