Linux serial

Similar Questions

• sending and "echo - n e '\040' >/dev /... for a Linux serial device"

  Hi, I'm a little confused, thinking that it may have to do with special characters?

  I have a command

  echo - n '\040' e > /dev/.../uledw

  who should be essentially turn an led on a Board of linux, if I use teraterm it works

  If I use actually labview teststand calling a series write in labview vi - (and I am following up with a sniffer port)

  It passes the command, but it does not run.

  I know that this may not be sufficiently detailed, but hopefully enough to get a conversation started.

  before - I create a .sh file, transfer it to the linux environment and run it there, but I'm not allowed to this now.  Is there a way?

  
  

• ORA-01034: ORACLE not available ORA-27101: Kingdom is no Linux-x86_64 shared memory error: 2: no such file or directory process ID: ID of Session 0: 0 serial number: 0

  Hello

  In our society, we have oracle server on Suse Linux with two instances TETA and TETA201.

  One day on a server broke down, because there is no free space due growing files 'archivelog.

  After that I manually deleted several older archivelog files, but after the reboot, the server error occurs when connecting to the database:

  "ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux x86_64 error: 2: no such file or directory

  Process ID: 0

  "Session ID: serial number 0: 0"

  $ ORACLE_SID is set to TETA, if export it to TETA201 connection works correctly

  Oracle service startup there is no errors but only one instance is running TETA201 works correctly

  #############################################################################

  # Beginning of start O R A C L E section #.

  #############################################################################

  PARAMETERS from/etc/sysconfig/oracle

  -Set the Oracle kernel settings: Yes

  -Start the Oracle Listener: Yes

  -Start the Oracle database: Yes

  -Start the Oracle Web server: no

  -Start Oracle EManager: Yes

  -Start Oracle iSQLPLUS Manager: Yes

  -Start Oracle Agent: no

  -Start Oracle Internet Filesystem: no

  -Run Oracle Directory Manager: no

  Can not find required file: isqlplusctl - START_ORACLE_DB_ISQLPLUS setting = no

  Undefinied Agent Oracle or not properly configured. Please check.

  Setting the parameters of the kernel for Oracle, see the file

  / etc/sysconfig/Oracle of explanations.

  Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

  Semaphore values: SEMMSL = 1250 SEMMNS = 32000 SEMOPM = 100 SEMMNI = 256

  Other values: FILE_MAX_KERNEL = 131072 IP_LOCAL_PORT_RANGE = 1024 65000

  RMEM_DEFAULT = 4194304 WMEM_DEFAULT = 262144 = 4194304 = 262144 WMEM_MAX RMEM_MAX

  Huge pages:

  ULIMIT values: MAX_CORE_FILE_SIZE_SHELL = unlimited

  FILE_MAX_SHELL = 65536 = 16384 PROCESSES_MAX_SHELL

  Kernel defined for Oracle parameters: fact

  -Start listener... done

  + From databases...

  Start entry for SID TETATEST to /oracle/product/11.2.0/dbhome_1/ inskippedratab

  Database instance "TETA" of treatment: save the /oracle/product/11.2.0/dbhome_2/startup.log file

  Instance of database 'TETA201' of treatment: save the /oracle/product/11.2.0/dbhome_1/startup.log file

  Status of Oracle database start: fact

  -Starting Apache... unused

  -From unused application server

  -From Application Server Console... unused

  -Start of Agent... unused

  -From Enterprise Manager...

  DB console departure for TETA starting DB Console for TETA201 done

  -Jumped from iSQLPLUS Manager...

  -From... unused Oracle Internet file system

  -From Oracle Internet Directory... unused

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  /Oracle/product/11.2.0/dbhome_1/startup.log

  
  

  SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43 2016

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  SQL > Polaczono.

  SQL > ORACLE Instancja zostala zamknieta.

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

  SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43:01 2016

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > ORACLE instance started.

  Total System Global Area 1043886080 bytes

  Bytes of size 2234960 fixed

  603981232 variable size bytes

  432013312 of database buffers bytes

  Redo buffers 5656576 bytes

  Baza danych zostala zamontowana.

  Baza danych zostala otwarta.

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

  /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: warm welcome of the instance 'TETA201' database has started.

  /Oracle/product/11.2.0/dbhome_2/startup.log

  
  

  PON sty 18 11:42:52 THIS 2016

  SQL * more: Production of the version 11.2.0.4.0 on Mon Jan 18 11:42:52 2016

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > ORACLE instance started.

  Total System Global Area 4175568896 bytes

  Bytes of size 2259840 fixed

  1409287296 variable size bytes

  2751463424 of database buffers bytes

  Redo buffers 12558336 bytes

  Baza danych zostala zamontowana.

  ORA-03113: end of file on communication channel

  Māju ID: 10080

  Sesji ID: 33, serial number: 3

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.4.0 - 64 bit Production

  /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: hot "TETA" database instance started.

  Linux: ~ # service oracle State

  #############################################################################

  # Begin State O R A C L E section #.

  #############################################################################

  Kernel parameters

  Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

  Semaphore values: SEMMSL, SEMMNI, SEMMNS, SEMOPM: 1250 32000 100 256

  Database Instances

  TETA instance is out of service (autostart: Y)

  Instance of TETATEST is broken (autostart: N)

  TETA201 of the instance is declining (autostart: Y)

  AMT-listener: to the top

  Webserver (Apache httpd): low (0 process)

  List of processes by user oracle:

  PID TTY STAT TIME COMMAND

  9855?        SSL 0:00 /oracle/product/11.2.0/dbhome_2/bin/tnslsnr LISTENER

  10128?        SS 0:00 ora_pmon_TETA201

  10130?        SS 0:00 ora_psp0_TETA201

  10132?        SS 0:00 ora_vktm_TETA201

  10136?        SS 0:00 ora_gen0_TETA201

  10138?        SS 0:00 ora_diag_TETA201

  10140?        SS 0:00 ora_dbrm_TETA201

  10142?        SS 0:00 ora_dia0_TETA201

  10144?        SS 0:00 ora_mman_TETA201

  10146?        SS 0:00 ora_dbw0_TETA201

  10148?        SS 0:00 ora_lgwr_TETA201

  10150?        SS 0:00 ora_ckpt_TETA201

  10152?        SS 0:00 ora_smon_TETA201

  10154?        SS 0:00 ora_reco_TETA201

  10156?        SS 0:00 ora_mmon_TETA201

  10158?        SS 0:00 ora_mmnl_TETA201

  10166?        SS 0:00 ora_qmnc_TETA201

  10338?        SS 0:00 ora_cjq0_TETA201

  11195?        SS 0:00 ora_q000_TETA201

  11197?        SS 0:00 ora_q001_TETA201

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  Help, please

  RMAN target /.

  RMAN > startup mount;

  RMAN > overlap archivelog all;

  RMAN > delete archivelog expired;

  RMAN > alter database open;

• Collect the serial numbers for Linux

  For the purpose of asset management, I want to be able to account for the serial numbers for Linux servers in VCM.  I played with it a bit and this is the best I could come up with to execute a remote command that translates a file created with the serial number and then pick up with a filter of personalized information.  Is there a better way to do it? In particular, I would like to be able to jump the output of the command into a file and having to ask that. If I can get out by running the command that would be great as well.

  Hello

  It is complex and is not 'visible' to the end user.

  But, VCM can create custom information types that can be used to run a command and then to analyze the output of command directly without you need to execute commands remotely and create a file to analyze.

  It is good to stick to the solution you came up with that.

  Thank you and best regards,

  Pravin Goyal

• Option named pipe to add the missing Serial Port to Linux host

  Hi all

  I try to add a serial port as a channel named for a kernel debugging

  the installer, but this option is missing (see screenshot1). There are

  However the options to add the serial port in the file/socket.

  The host is 64-bit Fedora 10 2.6.27.24 - 170.2.68.fc10.x86_64 running.

  Workstation is 6.5.2 build-156735. I found that the named pipe option is missing, regardless of the type of the guest OS.

  I had posted this last week.

  http://communities.VMware.com/message/1267552

  and he said since as soon as I put in the following options in the marked .vmx file, a serial port option came (see screenshot2).

  Serial0.present = 'TRUE '.

  Serial0.filetype = 'pipe '.

  Serial0.filename = "/ tmp/com_1".

  I realized that I have a VM as the serial port server and others as a customer. So adding the option-

  Serial0.pipe.endpoint = 'server '.

  However, this option is breaking the vm configs (cannot start VM until I have delete this line).

  Please see the attached screenshot3 6.5.2 on Windows and you will see that there is a different and complete serial port setting to the research. You can easily set a virtual machine as a client/server side of the connection series on Windows.

  I would really appreciate if someone could give me some pointers as to why this difference between Linux and Windows, and how to get the type parameters for the serial ports under Linux Windows?

  My main goal for the purchase of workstation was to do kernel debugging using the serial ports, and now I'm totally paralyzed because of this. Pointers and suggestions are greatly welcome.

  Thank you very much

  HS

  no need to apologize

  Hey - if you work with functions like this - use the vmx directly - file so you can be sure that you get what you order

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Serial number location linux cf8

  As I solve my problem of java, I have a standby server and I would like to install the CF on this issue. I know there is a file (thought it was an .xml file) who had the series in it, so I can simply install it in the box of dev for developers can continue to work.
  
  Anyone know what file it is?
  
  TNX

  [coldfusion]\lib\license.properties

• Satellite Pro L300 - questions ACPI in Linux: buggy dsdt implementation

  Hi, I have a L300 with Insyde BIOS 1.50 and I was struggling with the ACPI in Linux (like many others, the web is littered with hacks and workarounds for this laptop). After you enable the acpi kernel debugging, I noticed that some features were marked as not supported. Decompile and recompile with iasl Intel, I noticed this:

  Method (_OSC, 5, NotSerialized)
  {
  Store (Arg3, Local0)
  Multiply (Local0, 0x04, Local1)
  Name (BUF1, buffer (Local1) {})
  Store (Arg4, BUF1)
  Store (0, Local1)
  Store (zero, Local2)
  While (Local0)
  {
  Multiply (Local1, 0x04, Local2)
  CreateDWordField (BUF1, Local2, ACIP)
  If (Arg2)
  {
  If (equal (Local1, zero))
  {
  And (CAPB, 0xFFFFFFFC)
  }
  }
  On the other
  {
  }

  Increment (Local1)
  Decrement (Local0)
  }

  Return (BUF1)
  }

  Clearly, this does not meet the ACPI specification (of what is (was?) Toshiba active partner on all documents). From my understanding limited specification:

  (1) Method(_OSC... should list 4 rather than 5 args)
  (2) method (_OSC... must be serialized, because it contains a statement of name.
  2 (a) Alternatively the name (... statement could be replaced by a local variable any?)
  (3) and (CAPB, 0xFFFFFFFC) should have a result field. I looked side effects in the specifications, but none, so really this is if else block does nothing as far as I can see. That's where my understanding of the spec let me down. I don't really know what the original intent of the code, so I don't know what to do (though my best guess that is supposed to apply a bitmask for BUF1?).

  I hope someone more knowledgeable can help me solve this problem with an upgrade of the BIOS for this laptop (best) or a temporary to my DSDT solution so that I can send enough information for the Linux ACPI developers to circumvent the problems (not as good because it lets the other alternative operating systems out of the loop).

  Thank you for your time and consideration
  Phen.

  I doubt that anyone here in the forum would be able to help you.
  Here in the forum you would meet people who try to solve common issues of interest.
  Your problem seems more complex.
  Maybe you should check some special Linux why forums

  But who knows, maybe someone here with programmer and Linux knowledge can help you good luck

• Tecra S3 on Linux: hard drive not recognized

  Hello

  I recently bought a laptop Toshiba Tecra S3 and I'm happy with it, except for one important thing: I can not install Linux on it.

  I tried with the latest versions of Fedora Core and Ubuntu, the hard drive seems to be detected, but it is not recognized at the time of installation. I guess it's a matter of (too) new chipset Serial ATA.

  You have any recommendations or do you intend to contribute to the kernel modules in Linux/order that this model could be installed on Linux?

  Also note that I remember that I had the same problem when I tried to install Windows XP from a CD (not the recovery cd): the hard drive has not been detected and the installation failed.

  Thanks in advance.

  Hello

  I can t believe that you can not install a Windows operating system.
  You formatait once again the HARD drive? I recommend to format the HARD drive completely, then install the operating system.
  In addition, if you want to use the Windows operating system, you must use the recovery CD because this image included all the necessary drivers.

  If you want to work with the Linux operating system, I recommend using the Knoppix distribution. In this case you n t need to install anything. This Linux you can start from the DVD or CD and it works as a Linux operating system normally

  Good bye

• The BIOS utility 600th for linux (or boot back disk)?

  Hello

  I need to completely disable the IrDA and put ttyS0 Serial port (COM1). How?

  Assuming I need to the BIOS Configuration utility, but I found no linux version. Or BACK-version that fits on a floppy 1.44 ".

  ttyS0 was working well until I decided to update the kernel (bad idea!) A good point is that now I am able to monitor the status of the battery but ttyS0 dies which lead to situation that gammu smsd is not more work.

  Any help would be more than welcome!

  BR

  Miha-

  Problem solved. Booted from CD http:/miha.webhop.net/600E_BIOS_Configuration.iso

  and then sequence of commands:

  Disable imodem PS2

  disable the ir PS2

  disable the PS2 Sera

  Sera PS2 address 1 (= ttyS0 COM1)

  enable PS2 serums

  And restart. Now, serial port works again. Detective Conan.

• FTDI interfacing with myRIO RT Linux

  
  

  Hi fahad80,

  1.) make sure you have installing NI VISA USB Passport on the myRIO (I realized I had not checked it in the picture)

  2.) go from MAX, right-click on the myRIO under systems remote and select "transfer files".

  Then, go to:

  usr/local/vxipnp/linux/NIvisa /.

  Open the visaconf.ini file and add the following tokens [ASRL-RSRC-ALIAS] section:

  Name3 = "ASRL4::INSTR."

  Enabled3 = 1

  Static3 = 1

  SystemName3 = "/ dev/ttyUSB0 '.

  BaudRate3 = 9600

  Parity3 = 0

  StopBits3 = 10

  DataBits3 = 8

  FlowCtrl3 = 0

  NumOfResources = 4

  3.) then restart the device and use PuTTY SSH in the myRIO

  4.) then we will have to use this command in Terminal:

  chmod o + rw ttyUSB0

  5.) MAX refresh/restart to check if the serial port is displayed and is able to communicate and if not, try to restart the myRIO

  I would like to know what are the results of that.

  Kind regards

• How to get the console on cRIO based on linux?

  Hi all

  I develop new things on a cRIO 9068. This cRIO runs Linux RT.

  I built a framework of cRIO app and use for several years, I use the console to debug my code and have the status of my displayed cRIO.

  I can't find a way to see the console with the 9068 when I send strings to it (see the simple example attached to this post).

  Can someone help me see that I send to the console?

  BTW: I do not want to write debugging on the serial port, only to watch channels.

  In fact, in order to obtain the result (which is for the port series, either through the exit option "monitor" that requires activation of the console series see, or the serial port as usual without configuring the console out) to be visible, the network, there is not a great, simple way to do a little more ethernet today.

  One option you have is to change how lvrt is launched to save to a file and to access this file (either from lvrt, webdav or ssh), wrote messages on the screen. It is a more down-n-dirty approach, but he could get the results you wanted.

  Change the /etc/init.d/lvrt-wrapper or/usr/local/natinst/labview/lvrt-wrapper file to channel the monitor console to a file

  (note that brackets [] denote a touch, the lines that begin with / / are notes and does not have to be entered)

  VI/location/of/lvrt-wrapper

  Go to the line that looks like 'exec. "/ lvrt.

  [i]

  Add the following code at the end of the line

  [space]>[space]/home/lvuser/lvrt.log

  [:] [w]

  The line should now look like 'exec. "/ lvrt > /home/lvuser/lvrt.log.

  Restart your target, check the contents of the file with "cat /home/lvuser/lvrt.log.

• SMU-8431/8 RS-422 serial card sends the wrong number of bits

  I use a card series SMU-8431/8 RS-422 configuration for talking to a camera that has the speed of transmission parameters following 38400, 7 data bits, 1 stop bit, odd parity. I confirmed that the device certainly has these settings I can communicate with him using a separate Linux PC.

  When I try to use the serial port of EITHER the device does not react. Then, I connected the serial port OR on my Linux PC to see which sent the port NO. It is garbage. Nonprinting characters, control commands and the other characters are converted (for example I send the ascii character '1' and get the ascii character 'a').

  I made sure to add the terminating resistor 120 ohm NI RX + RX-lines and as mentioned in other posts on these forums, but it is only for the reception and did not solve the problem.

  I put a scope on the TX + and TX-lines from the map OR track seems reasonable that sent bits is correctly 38400 and voltage levels are correct moving between +/-3V. What I've noticed, is that the map series, NEITHER seems to be send to the 11 data bits. I expect 10-bit (1 start bit, 7 data, 1 parity, and 1 stop). I changed to 8 and then 6 bits of data and the total number sent passes to 12, then 10, respectively.

  I get the same behavior if I use Labview screws, Panel VISA for the port of MAX, or to remove the software NOR entirely and use Hyperterminal. This would seem to indicate that the problem is something in the settings of low level on the card itself.

  I tried a second SMU-8431/8 card and the same results, this isn't a fault map (may be two defective cards, I guess!).

  Any ideas?

  Many thanks in advance,

  Ian

  Discovered it was: used a scope to view the track both the Linux PC and the serial port OR to compare. The trace OR was significantly longer than the Linux. When I measured the width of the track OR whole, it worked to have a frequency of about 33 000, or much less that the 38400 assigned him. I was getting the wrong characters every bit of data from the port because NEITHER was out of sync with the Linux PC.

  I increased the port baud rate NOR and found that setting in 45 000 made it align correctly the Linux PC and I now the communication between the two devices.

  For the record, I don't have the terminating resistor 120 ohm or the anchor line to be included in the cable series between ports OR and Linux.

• NIDAQmxBase Linux RHEL 6 x86_x64 USB...

  Trying to get NIDAQmxBase 3.6 w / USB support for installed on LINUX RHEL 6.3 x86_x64 WS

  USB 6501 OEM,

  USB-6009 OEM

  running as root:

  [root@NIX1 /] # mount

  usbfs seems to be mounted... etc/fstab to mount it as indicated

  / dev/map/vg_nix1-lv_root on / type ext4 (rw)
  proc on/proc type proc (rw)
  Sysfs on/sys type sysfs (rw)
  type devpts on/dev/pts devpts (rw, gid = 5, mode = 620)
  tmpfs on/dev/shm type tmpfs (rw, rootcontext = "" system_ubject_r:tmpfs_t:s0 "")
  usbfs/proc/bus/USB type usbfs (rw, devmode = 0666)
  / dev/sdb1 on / boot type ext4 (rw)
  / dev/map/vg_nix1-lv_home market/House type ext4 (rw)
  None on/proc/sys/fs/binfmt_misc type binfmt_misc (rw)
  sunrpc on/var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
  / dev/sr0 on/media/NIDAQmxBase360 type iso9660 (ro, nosuid, nodev, uhelper = udisks, uid = 500, gid = 500, iocharset = utf8, mode = 0400, dmode = 0500)

  lsdaq runs and complains about the firmware:

  [root@NIX1 /] # / usr/local/natinst/nidaqmxbase/bin/lsdaq
  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:

  Device error: incompatible firmware.  Serial number: 01646C 23

  Run /bin/FWUpdate update.

  green light on USB 6501 flashes constantly

  running FWUpdate compains as follows:

  --------------------------------
  [root@NIX1 /] # / usr/local/natinst/nidaqmxbase/bin/FWUpdate
  Could not load library /usr/local/lib/liblvrt.so.12.0
  libXinerama.so.1: cannot open shared object file: no such file or directory
  To download the engine Runtime of LabVIEW, go to http://www.ni.com/rteFinder?dest=lvrte&version=12.0&platform=Linux&lang=en

  location of /usr/local/lib/liblvrt.sa.12.0 reports:

  [root@NIX1 /] # locate liblvrt.so.12.0
  /usr/local/lib/liblvrt.so.12.0
  /usr/local/lib/LabVIEW-2012/liblvrt.so.12.0.0

  STAT to file reports:

  [root@NIX1 /] # stat /usr/local/lib/liblvrt.so.12.0
  File: ' / usr/local/lib/liblvrt.so.12.0'-> 'LabVIEW-2012/liblvrt.so.12.0.0 '.
  Size: 30 blocks: 0 IO block: 4096 symlink
  Feature: fd00h / 64768d Inode: 131699 links: 1
  Access: (0777/lrwxrwxrwx) Uid: (0 / root) Gid: (0 / root)
  Access: 2012-10-22 14:27:59.858557301-0400
  Change: 2012-10-22 14:27:59.813443661-0400
  Change: 2012-10-22 14:27:59.813443661-0400

  NIDAQmxBase 3.6 installs VISA and 'C' interface via. \INSTALL, reports success, seems normal.

  cannot run lsdaq, FWUpdate or anything like that on the Menu of Applications National Instruments (NI-VISA submenu, OR Trace of IO.)

  My guess is that the permissions are always watered.

  Solved and was able to update the firmware.

  Well explained here...  http://digital.NI.com/public.nsf/allkb/93C92D41B25341B286257A4D007BACB8

  and here's how-useful.  http://h10025.www1.HP.com/ewfrf/wc/document?CC=CA&DLC=en&docName=c01769573&LC=en

• Setting of baud rate with CVI runtime for Linux

  Hello people,

  I have a problem regarding the setting of baud rate with the CVI for Linux runtime.

  I want to communicate with a device that has a USB-to-serial of FTDI chip. The driver for this device is already included in the kernel (openSUSE 11.1, 2.6.27.23 - 0.1 - default i686 kernel).

  I can use a terminal program (HTerm 0.8.1beta) to open the serial port at/dev/ttyUSB0 and can set all baudrates, the unit supports (38400, 115200, 921600) and communication works perfectly.

  Now I take the example of series of NEITHER and go under Windows. I developed to support 921600 baud, and it works very well. So I try to run this example on Linux (I've expanded in order to open/dev/ttyUSB0), but it only works for 38400 baud. If I try to put 115200 or 921600 baud, then I get error RS232-14 (invalid baud rate).

  It would be nice if there is someone who can give me a suggestion what I need to do to get the job to 921600 baud.

  Best regards

  Martin

  Hi NickB,

  the patch done!

  Thank you very much.

  Best regards

  Martin

• Mass - Linux - Debian Wheezy storage

  I have just connected my phone to my Debian Wheezy machine in the hope that, unlike Samsung, Sony will have Mass Storage as an option instead of MTP (Media Transfer Mode) / PTP (picture transfer protocol).

  # uname - a
  Linux PrecisionM6600 3.2.0 - 4-amd64 SMP 3.2.63 - 2 + deb7u2 x86_64 GNU/Linux Debian #1

  # dmesg

  [228867.196204] 4 - 1.1 usb: USB broadband new number 14 of the device using ehci_hcd
  [228867.289783] usb 4 - 1.1: new USB key found, idVendor is 0fce, idProduct = 01ba
  [228867.289793] usb 4 - 1.1: new USB device strings: Mfr = 1, product = 2, SerialNumber = 3
  [228867.289800] usb 4 - 1.1: product: D6633
  [228867.289804] usb 4 - 1.1: manufacturer: Sony
  [228867.289808] usb 4 - 1.1: serial number: XX1X319X8X

  But I was deceived, when connected, I got the offer by phone to install the software on my

  PC so I agreed and finish with virtual CD-ROM to install Windows software and no mass storage

  [228938.616806] scsi10: usb-storage 4 - 1.1:1.1
  [228939.612859] 10:0:0:0 scsi: CD-ROM SONY CD-ROM 0100 PQ: ANSI 0: 4
  [228939.617458] sr1: scsi3-mmc reader: 0 x / 0 x caddy
  [228939.617879] 10:0:0:0 sr: Attached scsi CD-ROM sr1
  [228939.618152] 10:0:0:0 sr: Attached scsi generic sg3 type 5
  [228940.195485] ISO 9660 Extensions: IEEE_P1282

  Why is there no support for Linux / Mass Storage on Z3?

  If you have an external SD card in your phone, you can connect this MSC instead of PSG. You can set the Sub settings-> Xperia connectivity-> USB connectivity-> USB connection mode. But the phone's internal memory can be connected using the PSG. If I understand correctly, this is because MSC would require your PC to have exclusive access to the memory and the internal memory of the phone is used by applications and the OS, so it cannot be used for MSC.