list backup command does not

Similar Questions

• Backup function does not?

  Backup function does not. The program runs and ends with an error message, access is denied. (0x80070005). Looks like a backup has been completed. I tried another external hard drive as a destination and got the same result. Help!

  Hello

  · You are the administrator of the computer?

  Step 1: Make sure that you are connected to the computer as an administrator. If you are not then you will need administrator to help you in the backup.

  Step 2: Temporarily disable the antivirus and check if the problem persists. If no problem occurs, then you need to firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• UC520 # squeeze flash: command does not exist - need help

  Hi all
  I am having trouble with a UC520. After the update, removal and the phoneloads to the flash Uploader: memory, it is almost full. (But there should be more space available).
  When I use the command display flash: or dir/all/recursive flash: the UC500 told me there are 4.505.600 bytes available (123.678.720 bytes used) my card flash 128 Mr. but when I the sum of simple files file sizes it is only 64.543.836 bytes so it must at least be free 60Mbytes.
  After some research, I think that the problem is that the flash is fragmented or files where not propperly / entirely deleted.
  To resolve this problem Cisco offers the command squeeze . But this command does not exist on the CPU. How to solve this problem, do you have any suggestions?
  -Patrick

  Wow. I have no idea this is.

  I guess you can back them up and get down them. Maybe after some research on orphans' on flash iOS.

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata

• Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Thank you! Who took care of her!

• Windows 7 Ultimate backup service does not work

  I have Windows 7 Ultimate on my computer as a clean install. When I run first the service backup Windows, I get an error message. "The installed service failed due to an internal error. The specified service does not exist as an installed service. "error 0 x 80070424. How can I fix that I can do a backup on my hard drive?

  I have Windows 7 Ultimate on my computer as a clean install. When I run first the service backup Windows, I get an error message. "The installed service failed due to an internal error. The specified service does not exist as an installed service. "error 0 x 80070424. How can I fix that I can do a backup on my hard drive?

  Click Start > run and type services.msc and press ENTER, locate Windows Backup Service in the list. If it is not started, try to run. VP Tech Services

• Windows 7 backup function does not recognize the external drive connected to the wireless router

  I installed a Belkin router for my laptop and pc, it came with a usb port so that I can connect my external hard drive directly and share it as a backup drive.  But when I tried to set up in Windows 7, the backup options list.  The network recognizes it, but Windows will not let me select it as backup destination.  A buddy of mine said that the backup of Windows 7 does not work with network drives, but no matter who else thought of it?  Thnx.

  It depends on the flavor of Windows 7. The Home Premium version will not network disks, backup but the Ultimate version. You can connect your drive as a USB drive when you make your backup.
  _________________________
  ID #0316. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• Backups RMAN does not match its retention policy

  Hello

  I have two or three instances of PROD on Windows environment with 11.2.0.3 version of DB. RMAN retention policy is set to 14 days, but I noticed that the backup is showing greater than that.

  For example: backups whows LIST BACKUP OF DATABASE since October 13. I also checked the elements of part of netapp backup and they are present.

  DELETE NOPROMPT OBSOLETE do not remove whatever it is like expired backup.

  I have clear and defined retention to 14 days over policy but doesn't seem to work.

  I would be grateful suggestion (s) about the strange.

  Thank you very much.

  Best regards

  John-MK wrote:

  Hello

  I have two or three instances of PROD on Windows environment with 11.2.0.3 version of DB. RMAN retention policy is set to 14 days, but I noticed that the backup is showing greater than that.

  For example: backups whows LIST BACKUP OF DATABASE since October 13. I also checked the elements of part of netapp backup and they are present.

  DELETE NOPROMPT OBSOLETE do not remove whatever it is like expired backup.

  I have clear and defined retention to 14 days over policy but doesn't seem to work.

  I would be grateful suggestion (s) about the strange.

  Thank you very much.

  Best regards

  We would need to know what kind of backups and where they were taken.  Imagine this scenario:

  7-day retention strategy.

  Level 0 incremental backup taken on Sunday

  Backup incremental level 1 taken Monday at Sam.

  Let's say that October 1 is a Sunday, so we take an Inc.-0 backup on October 1 and again on Oct. 8.

  Now let's say that we are at 10 Oct.  Our 7-day retention policy dicatates that we can recover any day of return to 3 Oct.

  The only way we can find to 3 Oct is to start with this backup Inc.-0 Oct. 1.

  Recovery all starts with last Inc.-0 backup before the point in time to be recovered.  In a normal life, regularly cycling calendar of backups, actually will end you with backups 1 day far twice also older than your retention period.

  A more extreme example.  Same period of retention of 7 days, but after a single backup Inc. - 0, you don't take any backups of 3 months.  That only a backup is always necessary to apply your window of recovery and therefore is not obsolete, despite the fact it is 3 months old and your recovery window is 7 days.

  Also, you mention "expiration".  Regarding backups oracle, 'expired' isn't the same as "obsolete".

  "Obsolète" means "is more necessary to apply the principle of recovery."

  "Expired" is a little more complex.

  When a backup is performed, or an archivelog is written, an account of which is written in the repository.  When you do a 'crossover' rman, these repository records are compared to reality - to see if the archivelog or saved backup file actually exists.  Maybe someone used an OS command to delete them.  Any file found "go walkabout" have their directory of files marked as "expired".  An rman "expiration to delete" then delete the records in the repository.

• ESXi 4.1 - Dell Poweredge 2850 - tape backup - host does not support configuring passthrough

  I'm trying to get a tape backup to work on my ESXi host, so I can save my win2003 VM.  I get this error under VMDirectPath, 'host does not support configuring passthrough ".  Under Configuration > storage adapters > I don't see my tape drive listed.  Also, I noticed that my SCSI controller card is NOT on the HCL (Adaptec 39160).  See.  This is probably why passthrough doesn't work.

  So, I was thinking of buying this one (Adaptec 39320) because he seems to be on the list.  This will solve my problem or is this server too old for passthrough to work?

  To use VMDirectpath on an Intel Server chipset used must support Intel VT - d (Directed i/o).   I don't think that's the case with the models of 2850, but if it was you would see an option in the BIOS to enable this.  It is a separate option of VT - x, which allows the host run the 64-bit clients.

• "Backup Optimization" does not work for the "database backup"

  Hello
  
  I use a windows environment and my info from database is like this:
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  now I have to change my configuration for backup optimization on and then make example tablespace offline and do file sample data in offline mode. After that, I run 2 times 'Backup Database' command but 2 backup has the same size and have example tablespace too... Any backup archivelog is work bur backup database is not!
  According to this link, it does not backup datafile for the second example: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV113
  is there something I missed?
  
  configuration of RMAN:
  

  CONFIGURE RETENTION POLICY TO REDUNDANCY 5;
  CONFIGURE BACKUP OPTIMIZATION ON;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF;
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE COMPRESSION ALGORITHM 'HIGH' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\APP\ABC\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL.ORA'; # default

  No failure, it works an expected. There is a relationship between the retention policy and the number of backups:

  RMAN only ignore backups of offline or read-only data files when there are backups n + 1, where n is the redundancy. You have of the "REDUNDANCY 5', and you will keep 6 identical backups of the offline data file.

  Werner

• RMAN - list backup command

  Oracle 10.2.0.4
  
  I assigned a band unit that has a drawn backupset of another data base and trying to backup from the list. Am I missing syntax here?
  
  RMAN > run
  2 > {allocate channel sbt type ch01
  3 > format = '% d_data_set % s_piece % p_ T_ %U '.
  4 > PARMS 'ENV=(TDPO_OPTFILE=/a0167/oracle/tivoli/ndk8oasu181.opt) ';
  5 > list backup;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'list': expected an of: "{assign, modify, save, beginline, blockrecover, catalog, edit, copy, convert, duplication, configure, duplicate, debug, delete, run, endinline, flashback, host, mount, open, plsql, recover, release, replicate, report, restoration, resync,}, together, setlimit, sql, switch, start, stop, send, display, transport, post.
  RMAN-01007: column 1 row 5 file: entry standard
  
  
  Thank you!!

  Hi, you can not use "backup list" command in block execution (run {}). You can only use it outside block 'run '.

• I upgraded to ois9.3.3 and now my voice command does not work

  Yesterday, I did the upgrade of the ois 9.3.3 and since my voice command will not work.  I searched the internet for advice on how to fix but nothing that they suggest work.  How can I get rid of this upgrade and go back to what I had which works or solve this problem.  I need voice control for I can be hands-free while driving.

  Have you tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo come back? You won't lose data by doing this, but he cn cure some problems after installing new software or applications.

  Have you tried to downgrade from iOS?