List of automatic reading program

Similar Questions

• Automatic reading of the SD card no longer works

  When I right click on the properties of an inserted SD card I have Autoplay, but nothing happens when I click it.
  When I click on AutoPlay tab the drive properties and tell what program should open the SD card, nothing happens. TweakUI for Win XP, all drives are checked and seem to be enabled Autoplay. How to solve it?

  Hi hadou,.

  After inserting an SD card on a computer with a new installation of Windows XP for the first time, the feature of automatic reading of your Windows XP edition operating system family does not work. However, after you insert the SD card in your laptop computer, the AutoPlay feature can start working again.

  As far as I know, the Auto Play cannot start because WXP has not initialized your SD card device in the registry. What you can do is to restart the system with a SD card inserted in the SD card reader. This should reset the SD card registry entry.

  Try to please and let us know if the work of properly AutoPlay feature.

  BR

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Try to add a printer, but it says that it is already installed. But it is not in my list of installed/uninstalled programs.

  I tried to add my printer to run off of my laptop wireless, my desktop computer, is connected with a Linky router, my DSL. When I use add printer to my laptop, I do very well, until a box opens and indicates that the printer I am trying to add, is already on my laptop, & let me not then add it. I checked my list of installed/uninstalled program, but it is not listed there. My printer work very well on my laptop, when I had Windows XP on my desktop, but since I upgraded to Windows 7, it will not work. Please help me & thank you!

  Hello

  ·        What is the operating system on your laptop Windows Vista or Windows 7)?

  ·        Where is the printer connected (to the desktop or the router)?

  Check if the printer is already connected.

  If Windows Vista installed on the laptop

  (a) go to control panel

  (b) select the printer and check to see if the printer is already listed. If so try to print a test page and check what is happening.

  If Windows 7 is installed on the laptop

  (a) go to devices and printers

  (b) check if the printer is already listed. If so try to print a test page and check what is happening.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printable list of all installed programs

  How can I quickly get a printable list of all installed programs and program information, i.e. version?

  Can you open control Panel\All Control Panel Items\Programs and features and then use the tool captures to save an image of the page for printing?  You may need to do it in several parts for complete list.

  Program and features should be in Details view.  You can also use the details to choose... to get the additional columns

• Windows 7 Doesnt list of recently used programs

  Recently used programs list, does not list the recently used programs, is not sort my most frequently used. Installation of a windows 7 Home premium.

  When a program is installed first it is listed, even if I used havnt. After I click on it, it deletes itself recently used programs and never hit list again even if I click on the icon of the button start again and again.

  Maybe it's not a menu "recently used", it is a menu "frequently used".  I saw the user of Microsoft interface Style rules and a few articles on MSDN explain the subtle differences, before... so I think that Windows is not calculate frequent that fast, or the taskbar.  If you want to display on the list, you must open it in menu start (the long way). If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• disable automatic startup programs

  How to find and disable automatically starting programs? Thanks for the reply

  Click on start / all the Programs/Accessories/RUN, and then type:

  MSCONFIG

  The start tab has check boxes for this

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• signature - salvation... I updated my acrobat reader program and now my handwritten signature imported is lost... I can't find how to import again! Help!

  Hi... I updated my acrobat reader program and now my handwritten signature imported is lost... I can't find how to import again! Help!

  Hi melissaa22387347,

  There is no such feature to import or export signatures drawn.  Only digital ID & certificates can be imported.

  You will need to draw again.

  Kind regards

  Nicos

• Possible to program a list shared automatic export to a server?

  Hello - is it possible?  We work with a third party who send e-mails on our behalf and need access to a shared list that stores cancels his subscription.  The person who manages the publication doesn't have access to Eloqua, nor do I want to give them access.  Anyone already done this?

  Hi Eric,.

  I did it in the past and we establish this as an ongoing process. Don't know if you're on E9 or E10, but steps would be same report E9 or Insight reports.

  1. go in a report called Contacts by the contents of the Contact field and Contact filter and choose the field value and the Contact filter that checks the opt-out, save the report.

  2. now go to the Admin and report under your name, you can choose to export report only ftp the report within a reasonable time (daily, weekly, fortnightly or monthly) to the ftp of your seller site or create an update by e-mail, if the quantity is less and send them in an e-mail report, under Choose an option of Excel.

  There are many other options using the Eloqua API http://topliners.eloqua.com/community/code_it/blog/2013/01/03/eloqua-api-chart--supported-operations, but it would be a simple.

  I hope this helps.

  Thank you

  Amit

• Deleted cd reading program

  I have delited somehow the program that reads the cd, how can I get it back?

  Try the automatic Fixit to see if that will help your question.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/

  Let us know if that helps with your question.

  Marilyn

• Conflict with MSE and Windows Defender didn't let me stop the automatic opening programs.

  I am running MS Security Essentials (on a Vista system) which has disabled Windows Defender.  Now when I try to stop a program open automatically at startup, I get the prompt of Windows Defender has been turned off.  The dialog box crashes when I click on the box to turn on windows Defender.  How to stop a program open automatically?

  Windows Defender is not the only way to access the startup programs.

  Start button > in the search box, type msconfig > Enter > at the top, click on Startup tab > there's your list of startup programs.

  Uncheck the box in front to turn it off.
  Check the box in front to allow.

  Click OK when finished.

• Need a list of disk management programs start.

  I need a list of startup disk management programs. auto\manual\delayed automatic, please

  Hello

  See Autoruns:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• the computer is configured to automatically run programs at startup detected

  I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...

  When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to

  do before.

  and she said then in a pox: problems

  the computer is configured to automatically start detectet and a yellow triangle with an exclamation point

  could you please tell me how solve the problem... thank you so much manual

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Mozilla does not, so I uninstalled and downloaded again, now he says I downloaded, but no icons anywhere and no not listed in my downloaded programs lists.

  I used Mozilla on my laptop for years. All of a sudden it does not open. So in desperation I uninstalled and tried to reinstall it. I went through the step ('run' and then 'Yes'), but no icon and no mozilla in my list of "programs", but it says on the web page of download I installed mozilla. Help, please. I like mozilla. Sarah

  Remove the firefox installation folder located in both.

  • C:\Program Files\Mozilla Firefox

  OR

  • C:\Program Files (x 86) \Mozilla Firefox

  Then run the installation again, this time, the complete installation program.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Automatically read the file next to the folder

  HI I'm reading in the file and the attached vi allows to calculate the area under the curve.  everything works, except that I would like the feature to automatically select the file "next" or "previous file" with out having to reopen the dialogue of the user.  Any help would be greatly appreciated.

  I'm not watching your vi but attached is a way to navigate to the file preceding and following.  You will need to add some range test (if the file is the first or the last in his repertoire).

  Ben64