List of clear MRU from the splash screen

Similar Questions

• tiles Windows 8 app has disappeared from the splash screen

  My computer has forced a reboot for an update today and after I back in all the tiles from the app (weather, photos, applications purchased in-store, etc.) had disappeared from the start screen, with the exception of desktop computers and store.   Nothing seems to be disturbed in desktop mode this just seems to be the Win8 apps.   I didn't install anything (with the exception of windows updates).   How to bring back these tiles?

  Windows key + X, select command (Admin) prompt and type sfc/scannow and return.  If it detects and repairs system files, run it again until no error.

  If this does not correct the situation, you must do a refresh install.

• Remove contact link from the splash screen

  I created a link to a contact on my startscreen and you want to delete it now, because it is really useless and doesn´t longer work.

  When I go to the list of Applications, as if removing applications, I can't find this link...

  Clues on how to remove it?

  Hold down the Orange/option key while tapping on the icon.

• Cannot access the applications from the splash screen

  The tiles on my startup screen is working/not unresponsive. with the exception of the tile of office. What is the problem with that? Help, please. I'm not a techie, so I have no idea what to do!

  Thank you.

  Original title: it does not work!

  Hello

  Please, try the command SFC/scannow administrative command prompt and reboot, see if that helps.

  Hope this helps, good luck :)

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Adobe Illustrator CC hangs on the splash screen

  Hello

  I couldn't find a similar thread with similar solutions, then we are, about 2 months ago, my Adobe Illustrator CC stopped opening. It starts up and displays the splash screen but then stops everything in "Reading Fonts" (see image below)

  I had not changed anything or downloaded everything I know and I thought it would start working again, but alas.

  I have a MacBook Pro (15 inch, late 2011) race Yosemite 10.10.1

  Things I've tried so far the problem:
  Uninstalled / reinstalled twice.

  Restarted my computer a million times.

  Cleared cache folders according to other suggestions from forums.

  Reset the system fonts and remove all the fonts in the system (by font book, if there is another way to solve the question police please let me know)

  Please help if you can, I'm at a total loss.

  Thank you.

  It is stuck on the screen:

  

  Alice,

  Point 1) and 11) less than 5 years) in the following list may be appropriate (I'm not sure if FontBook serves you well) and 6 complete), too.

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• The splash screen is not up-to-date files more recent ten. I use 2015.1.1 is there a parameter? Preference?

  The splash screen is not up-to-date files more recent ten. I use 2015.1.1 is there a parameter? Preference?

  Hi Jontbm,

  Go to the file menu > open recent item > clear recent files list > restart Photoshop and then check out.

  Kind regards

  Claes

• How to remove email from the lock screen in iOS10?

  In previous versions of iOS, you were able to delete emails from the lock screen.  Now in iOS10, the only options are 'View' and 'clear '.  Seems really stupid if Apple disabled this feature, as it has helped to manage the spam I receive without having to get into my mail and clean.

  Thoughts?

  It would interest me, is really very silly.

  In German:

  Habe ich Täglich mit sehr vielen emails zu tun. ICH konnte sie immer too im Sperrbildschirm löschen oder als markieren read equal. Das ist jetzt nicht mehr possible.

  Jetzt muss ich jede E-mail erst im Sperrbildschirm lassen um sie dann löschen oder als zu markieren read ads.

  Warum wird eine Funktion removed einfach so?

• Satellite L640 hangs at the splash screen

  Hi all

  I have a L640 / 01 H that I bought earlier this year. In addition to the original Windows 7 OS, I installed a Linux system on a separate partition.

  Earlier today, I was using Linux (which is what I normally use) and everything was really slow.
  Finally I force-shut-down, power button.

  Now, I noticed a problem with the BIOS on this laptop - if I try to start when there is a USB flash drive is connected, the splash screen just hangs. Today when I rebooted I realized that I had left a flash drive, then I got out and I tried to start it again, a couple of times. Whenever the computer crashes just indefinitely on the startup splash screen.

  Finally I gave him enough time and it takes the selection of Linux boot menu, so I tried to start my usual kernel but he gave me some message about a bad MBR.
  I kept trying to start, but the boot process is stuck, what happens is as follows:

  * The three lights on the left (power, battery and light) come on, no problem
  * HARD drive flashes white for a few seconds, then turns off. Occasionally, it will blink again.
  * At the same time, the screen is just stuck on the startup splash screen. If I try to press f2, f12 or any key too many times it will start emitting beeps whenever I press it. There is no way to get into the BIOS settings.

  Also, I can't boot from CD (Windows recovery CD or Linux LiveCD). Finally some kind of time-out of the entry into force, and the computer restarts itself to start the process all. Yay!

  I tried the stuff "unplug the power cord, remove the battery, hold down the power button / stop, plug back in, try to start" but nothing has changed. I also tried switching memory locations (only one chip of RAM, so I can't try a process of elimination on the RAM).
  Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  I thought I'd try resetting the CMOS battery, but I'm worried I'll damage something / make the problem worse. Someone at - it ideas? I know that the thing is still under warranty, but service centres are often slow and I don't want to lose the data from the hard drive.

  Any help would be really appreciated.

  > Finally, I also open the door to HARD disk and removed the HARD drive, then tried to start. This time the BIOS has answered, if only to tell me that there is no appropriate boot media. At this point, the BIOS was responsive and I could change settings in there, but I could not boot from the CD.

  It could be a problem with the CD/DVD drive what you think of this idea?
  Perhaps the BIOS does not recognize the CD/DVD drive properly and so there is a problem starting the bootable disc.

  In addition, it might be possible that failures of HARD drive and, therefore, you received an error message about the MBR (master boot record).

  Remove the CD/DVD drive and try to install the Windows booting from a USB flash drive.

  _Regarding the battery CMOS: _
  I would not recommend to disassemble the laptop because you could damage other parts and in addition it should know that the CMOS battery is not removable it s soldered to the motherboard

• HP pavilion monitor go black after the splash screen

  When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!

  Hi lostone64,

  The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?

  Have you tested the hard drive or made sure it appears in the BIOS?

• SignalExpress closes immediately after the splash screen

  I'm having a problem with the Software NI SignalExpress where the application fails to open completely - it closes immediately after the splash screen. I am using windows XP Pro. SP3.

  I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation - or who work.

  A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).

  Hi André,.

  Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn't get rid of everything, there is still hidden folders around dootted.

  I joined msiblast.exe.

  -Run msiblast

  -Make sure the radio button "Show OR installers only" is selected.

  -Select all and then click on uninstall.

  When this is complete, your computer will be NOT free. After that;

  -Install all software from OR you for example LabVIEW Signal express

  -Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.

  If it persists then write again.

  Kind regards

• How can I prevent the splash screen to disappear after a few seconds?

  I have a HP Touchsmart all in one by using Windows 7. The machine is brand new.

  Whenever I get the splash screen, if I am not for nothing, after that a few seconds, the screen turns off and then I can make it back by pressing any key and then click on my name from the entrance to ge the rear screen startup.

  Hello jimtiger: I'm not familiar with the Touchsmart version 4 software. It works with version 3 of Touchsmart. Left click mouse any where on the screen click on customize. The opening of new windows screen saver goto adjust the wait time for a longer period of time.  Can also change the settings of computer power. Control in the lower right panel, you will see tools and information on the performance up until it clicks. Top of next window right-click on the adjustment of the parameters of energy.  Check high performance box.  Who will now have a blue dot. Just beside it, you will see the settings of plan up until it clicks.  You will see the screen dims: click the box next to it. My is set to 10 minutes below. Turn off the display: click the box my is fixed to 15 minutes. Put the computer to sleep: click the box my is defined. Never. Brightness is right-wing. Under that, you will see the change, click on advance power settings. Everything has a greater mark in it. Click ok. Close all windows should be all set now.

• Administrator accounts still exist, but do not appear in the list of users or on the Welcome screen.

  Hello

  A week or two ago, the non-administrator user account icons disappeared from the Welcome screen in Windows XP (32-bit home edition).  Also do they not appear on the list of user accounts.  However, their directories of files remain on the hard disk in Documents and Settings.  They can connect via CTRL ALT DEL x 2, but that's all.  If I try to recreate the accounts, returns the message "account already exists."  I searched the web for ages and many similar symptoms, but none reported patches work.  Any ideas please?
  Thank you very much.

  Matthew,

  In light of the where you are, my next step would be to treat these users hidden like 'corrupt profiles' and try one of the several approaches that cover profiles corrupted.  The General method to recover a damaged profile is to create a new user and move all data of the corrupted user profile which has been created.  Once this was accomplished, the corrupted profile can be deleted from the system as well as the user name.  Follow the procedures described in either of the following items:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  If you use Outlook Express for e-mail, make sure that you also have to follow the instructions here:
  "OLEXP: how to back up the address book Outlook Express and mail records.
    <>http://support.Microsoft.com/kb/188854 >

  HTH,
  JW

• Windows XP hangs at the splash screen (logo). Dim screen when hooked.

  I do have problems starting XP 2 on two different hard drives.  I'm more concerned at this time is described in the title.  I bought a new hard drive (Western Digital Caviar Blue WD3200AAKS 320) to back up the data on my old hard drive, due to the other XP startup problem and installed Windows XP Home edition, as well as my motherboard drivers, etc..  It starts very well, at first, but then started a curtain to the start screen (and the splash screen is very low in this case).  I tried to remove some additional applications provided with the motherboard, no luck.  I tried to reinstall XP several times, and who has not helped.  I tried to update my video driver, running chkdsk, running Windows Memory Diagnostic (which does no problem), cleaning the registry with Advanced System Care Pro, unplug all USB devices and network cable, etc.  He continues to hang at the splash screen (weakly).  When I try to start in safe mode, it hangs at "mup.sys.  So far, I'm able to get XP to start by repeated restart later...  I searched the web to find a solution for this and have found no definitive answer.  I just ordered another new hard drive and Windows 7.  I intend to dual boot with windows 7 the new HD and XP on the current disc (assuming that this problem can be solved!).

  My other problem is on my old sister Hitachi 160 GB IDE hard drive.  A few months, our PC stop working.  After buying a new power supply (Corsair TX650w) and determine that he was not a power supply problem, I bought a new motherboard (GA-MA785GT-UD3H), (AMD Phenom II X 2 555 3.2 Ghz) CPU, RAM (CORSAIR XMS3 DHX 4 GB (2 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333), and some new fans (old system died due to heat issues).  Once I had it put in place and I tried to boot XP from my old drive, he just went in a "boot loop".  He gets to the XP splash screen, goes black and restarts, again and again.  I tried setting the installation of XP with XP CD 3 or 4 times, without success.  This question is not as big of a deal to me now, because I now have the new hard drive with the new number to start XP (intermittent).  My main goal with the old hard drive was to save all my data.  That is, life turns on if I can't start XP on this drive (the one with the boot loop).

  Thank you for your time!

  The BIOS update has * seems * solved the problem!  I rebooted it 4 or 5 times, but also completely off the PC and it starts today.  Did not repeat the problem so far!

  It is a great place to come to answer my own questions!  Bookmark!

• How to change name of registered owners on the splash screen in Visual Studio 2010 using Vista

  I recently bought VS 2010 Professional upgrade version (see VB2010 Express loaded onto PC, I had). On the VS2010 splash screen, it says recorded in: Don. All I want to do is display my full name. I managed to change my name to my name and surname on the screen about but nothing that I tried to change the splash screen... Any help would be greatly appreciated

  Hello

  I suggest you to send your request from the link and check.

  http://social.msdn.Microsoft.com/forums/en-AU/category/VisualStudio