ListItemComponent switch when running

Similar Questions

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• Switching between rendering engines when running.

  Hello members,

  I tried to move from a DataGridColumnRenderers when running under certain conditions in my program.

  But what I have does not up to.

  I made this prototype ask as to what lack me. If anyone knows please help.

  attached are engines rendering and file of the application.

  Any help appreciated.

  Thank you

  PRAD.

  Hello

  frankly I do not understand this part:

  if(Order==true)

  {

  var cf2:ClassFactory = new ClassFactory (DescendingLabelRenderer);

  orderColumn.itemRenderer = orderColumn.getItemRendererFactory (false, cf2);

  order = false;

  }

  on the other

  {

  var cf1:ClassFactory = new ClassFactory (LabelRenderer);

  orderColumn.itemRenderer = orderColumn.getItemRendererFactory (false, cf1);

  order = true;

  }

  Why not:

  if(Order==true)

  {

  var cf2:ClassFactory = new ClassFactory (DescendingLabelRenderer);

  orderColumn.itemRenderer = cf2;

  order = false;

  }

  on the other

  {

  var cf1:ClassFactory = new ClassFactory (LabelRenderer);

  orderColumn.itemRenderer = cf1;

  order = true;

  }

• Create new Pixelbender filters when running

  Anyone know if it is possible to create PixelBender filters when running?
  I want to be able to load any kernel of .pbj during execution to create a new filter.
  I think that the problem is with the embed tag. There is no way that I know how to dynamically generate the path of the CBC to the embed tag, it must be hard-coded.
  

  The following example is from the documentation from Adobe on the Shader. You can easily switch the PBJ you wanted to load it into the application. Once loaded, you can then apply or use it as an instance that has been incorporated.

  http://help.Adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WSB5D89F6A-065F-4b18-A163-D421 90DB7ABE.html

  var loader: URLLoader = new URLLoader();
  loader.dataFormat = URLLoaderDataFormat.BINARY;
  loader.addEventListener (Event.COMPLETE, onLoadComplete);
  Loader.Load (new URLRequest ("myShader.pbj"));

  var shader: Shader;

  function onLoadComplete(event:Event):void {}
  Create a new shader and set the data loaded as its bytecode
  Shader = new Shader();
  shader.byteCode = loader.data;

  You can also pass the bytecode to the Shader() constructor like this:
  Shader = new Shader (loader.data);

  do something with the shader
  }

• Define a jsf page links when running?

  Hello
  
  I use JDev 11 g to generate an application ADF BC (well, to play with her really ;-).
  
  I would like to know if it is possible to define links when a page is run.
  
  What I want to achieve, it is this, using the HR schema for example, is to have a main table detailing the DEPARTMENTS and a table of detail showing EMPLOYEES or LOCATIONS on the same page. Now, I could do with a switch, but I really didn't need two detail to run links. In addition, at some point in the future, I agree with being able to go, for example, a master EMPLOYEES retail DEPARTMENTS to a view of employee detail WORK/master on the same page, using the same components.
  So basically, what I want to do is first to define table dynamically links and then the relationship of the related mater-detail.
  
  Is it possible to redefine the links and my properties of tables when running, or do I have to take a different approach?
  
  Thank you for your help,
  
  Albain

  Hello

  There is no public API for this. In theory, you can generate the XML definition of the page on the fly if you understand what should be good enough. I don't know if it's worth because it's very advanced stuff you are trying. The gift that the bindings use deferred execution, your usecase is not yet valid for such an approach. Aynway, good luck

  Frank

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• Unable to access Mac files when running in Windows.

  Applied Bootcamp, running El Capitan and Windows on MacBook Pro 9.2 10.  Fine.  This is all OK.   But...

  I want to access my files of Notes from the Mac side.   I can get to the Notes.app in the Applications folder when running in Windows.  I understand that I can read Mac files in Windows.

  I can't get to the actual Notes files indicated in the content of the Note.app folder in the Mac partition.  (Running in Windows 10.)

  Can someone help me with this please?

  Missing Manual instructions ok, so far, but are not real files to open.  ???

  Thank you, Mark

  Windows cannot write to the readers of Mac format.

• Satellite A60 freezes when running on batteries

  Hello
  I have a problem with my Satellite a60. I bought it a few months ago and he starts it freezes when running on batteries. I don't think it's a problem of software or memory. I did a few tests of memory...

  It usually occurs only minutes after startup, the keyboard is not working, the screen freezes (but you can still see the immagine!) and only the exit ramp button works... but it happens sometimes... like once a week maybe... anyone else had similar problems?
  Thank you for any response,
  Radek

  Hi guys

  It is very difficult to say what may be the problem. In my opinion, there are several reasons for this. In the boot process, there may be some conflicts with background programs and services or certain hardware components. May be overwhelmed with all this processor and simply give up.

  If you wish, you can try to disable some startup items in the system configuration utility or disable certain hardware components not used in Device Manager. I don't know if this can solve your problem, but it will be interesting to know is there some success.

  Radek did you have this problem if the laptop is connected to the power supply?

• Satellite A100: sharp wail high when running on battery

  Hello world

  my laptop is 24 hours old and yet I get this sharp wail from left hand side near the exit of the fan. I don't hear it at all when running on the main, only on battery power. No idea what it is and why this happens?
  Also, is it "normal"? I would not have thought so!

  Thanks in advance.

  Hello Adam

  I think there is no reason to panic. I think I know what mean you, but if I'm wrong please let me know.

  This noise is probably due to FL inverter. If the laptop is connected to the AC adapter, try to change the brightness level by using the FN + F6 key combination and tell me if this noise occurs after doing this. Change the brightness level, the voltage will be reduced at low level and the result is this noise.

  When you use laptops with laptop battery power will run automatically on the other profile saver (NORMAL) power and this power profile monitor, brightness is set at the lower level. When the laptop is running on battery use FN + F7 and upgrade the most high and this noise will disappear. Am I wrong?

  This is visible on each laptop model, and it is normal.

• X 240 - in any case automatically confirguring Ethernet/WLAN switch when / logout...

  Is he still automatically confirguring Ethernet/WLAN switch when / logoff other than the use of ThinkVantage Access Connections?

  Logins is pretty infallible to deliver to users and there seems to be a way to massively.

  Anyone done any other way? HP has a setting in BIOS and Dell has a utility, but all of the Lenovo has seems to be source access.

  Hello

  Lenovo's AC under win7 is an excellent application, fine, you need including.

  However, there are many other methods, tools based OS on only.

  In addition, if the wifi adapter is produced by Intel, you can use PROSet features. Read the next page:
  http://www.Intel.com/support/wireless/WLAN/sb/CS-028815.htm

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says:

  

• Add items to the combo box when running

  In my program, I want to add int '34' "43", "17"... and let the user choose one of them to the drop-down list box. How can I add items to the combo box when running. Create a property node 'String [] '? I try that, but its screen is "3443". I want to display as "34".

  43

  17

  See attached extract

  

• error 7: when running EXE

  Hello

  I am getting below error when running exe. But when running in the development environment, it works fine. Help, please

  Reference VI opened in PRJA2871_Firmware_LoadVI.vi:70002-> PRJA2871_Firmware_Parameter Download.vi-> PRJA2871_MCRL main Screen.vi
  Path of the VI: test\EXE\MCRL_VCR\MCRL C:\LabVIEW new Code\Code VCR.exe\Ethernet\PRJA2871_Download_Ethernet.vi V2.1

  Built Application or shared library (DLL): ensure that all loaded screws dynamically were correctly included in the specification for the application or a shared library build.

  LabVIEW Real-time: screw built into executables are not accessible via VI Server calls. Use the Source Distributions dynamically call screws on real-time targets.

  Hi James,

  In fact, it was my mistake. I used a VI for the purpose of debugging. But that VI was not within the project. That's why he was throwing the error

• How to create a reference in the schema when running?

  Hello

  I make a program and I would like to create references to objects at run time, y at - it a function in labview that lets do?

  Thanks in advance!

  It of maybe just me, but what do you mean by "cluster objects"?

  What is a cluster as terminal? If this is the case, then just to let you know, that a cluster cannot change the size/number when running, you need a table for this.

  Where are you what to change the visibility for?

  If it's a 'high-level' orders/lights vi you what to change the visibility on a Subvi, then you must provide the sub - vi with an array of references to the controls/indicators.

• I have a 512-ES1-P84G with a handle leak when running Firefox

  I have Windows 10

  When you use Forefox version 45, 46 47 4th, even in safe mode, the number of handles for Firefox coults upwards forever.

  I have the factory Intel HD Graphics driver 10.18.10.4276 version

  There is a much more recent graphics driver available.

  1. someone else with Widnows 10 has a handle leak when running Firefox?

  2A enyone has resolved and how?

  3. has anyone upgraded to the last jerking of Intel's Intel HD graphics and there it works well?

  Thank you

  I stopped the handle leak.

  It was actually caused by BitDefender, my AV software and not Firefox.

  I stopped it by disabling "Active control of threat" in BitDefender.

  Thank you