Little advice please?
Hello world
First post please bare with me.
We have a little cumulative with default printers, the machine seems to remember installing a printer, but not the value by default once you re connection, it is by default to Microsoft XPS Writer.
Someone at - it an adivce? It is running XP Pro windows environment.
Thank you!
If I underfstand that you hav posetd {(pas vraiment sûr si notre prise sur le guset ou hos) your VM WS is running on an XP host.} I do not know what host operating system you guys use (it looks like a variant of Windows).
Check if your printer on the host computer is not XPS. This is the default value for a new installation of Windows guests. If this is you must install another printer on the host and which are lacking. For example if I install VMware 8.01 on Windows 2008 server host, I need instatll one HO old Laserjet 5 MP veru as default printer on the host computer. Whenever I have install any OS, window or Linux as a guest VMwaer picks up the prrinter default host each works without fail and ask you if you want to use on the client (then unavalable to the host or other guests).
Marty
Tags: VMware
Similar Questions
-
Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?
Don't you say no service at the top?
-
Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.
Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support
-
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
It's a delicate issue... like some patches cannot stipulate pitchbend...
But to quickly test your pitchbend wheel actually works properly...
Download the free lunch monitor...
Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.
-
Care of my MacPro is lower from a previous post. It does not start, but keep train. I get the rope to music if I stop and start again. Advice please. Thank you very much. Allan
Mac Pro (early 2008) (data sheet)
Mac Pro - model: MacPro3, 1
2 3 GHz Quad - Core Intel Xeon processor: 8 strands
8 GB of RAM expandable
DIMM Riser B/DIMM 1
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM Riser B/DIMM 2
1 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 1
2 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 2
2 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 3
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 4
1 GB DDR2 FB - DIMM 800 MHz ok
Riser A/DIMM DIMMS 3
Vacuum
Riser DIMM A/DIMM 4
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
NVIDIA GeForce 8800 GT - VRAM: 512 MB
HH281 1920 x 1200 @ 60 Hz
DELL3007WFPHC 1600 x 2560
OS X 10.10.2 (14C109) - since the start time: 20:27:26
ST3320820AS_P disk0: (320,07 GB)
EFI (disk0s1)
: 210 MB Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free)
HD (disk0s3)
[recovery] recovery: 650 MB WDC WD5000AAKS-41YGA0 disk2: (500,11 GB)
EFI (disk2s1)
: 210 MB System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free)
Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go)
Hitachi HDS721010DLE630 disk1: (1 TB)
EFI (disk1s1)
: 210 MB 3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free)
Prolific Technology Inc. IEEE-1284 controller.
Hewlett-Packard HP LaserJet P2055dn
Hub keyboard Apple, Inc.
Logitech USB receiver
Apple, Inc. Apple Keyboard
Apple Inc. Bluetooth USB host controller.
EPSON USB printer
Mac App Store and identified developers
You still have OSX 10.5.8?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
Subject of memory NVRAM and PRAM
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
-Start to recovery and repair the startup disk if Lion or higher
OS X: on OS X Recovery - Apple Support
Otherwise start from the installation DVD and keep the boot disk
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
Run the Apple hardware test. You will need one of the original installation discs
Using Apple Hardware Test - Apple Support
You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure
-
I have photo stylus epson rx 520 when I try and print from the internet he prints only on the left side, how do I set back to A4 portrait advice please. I have windows 8.1
Petersrex
You the best solution is to contact Epson. We don't support Microsoft products on this site and they know their best products.
-
Hi, I need to activate a CS4 license on a computer of mine that was stolen, advice please?
Hey Grant,
Licence can only be manually disabled, there is no way to disable if it you can not access it. However, if you want to activate on another machine, we would be happy to help you.
Waiting for your response.
-
I crashes when I try to open a file or make a new one. Advice please?
I use a laptop and windows. I starts OK, but I can't actually create anything before it turns off. Advice please?
Hi Tm,
Can you please check if there are any printers installed/connected on your system? If Yes, please un-install/remove the and check again?
Thank you best regards &,.
Rambour
-
Inspiron s 660: hard disk failure. Need advice please.
Long story short my sister gave me a s Inspiron 660 she received as a gift a few years back (legitimate). She said that was no longer working and I could. I suspected a faulty hard drive and after several diagnostic tests later confirmed the WD Blue crashed the original; complete failure. Now, here's where I need advice:
1. when it has received, it came not with a physical disk from the Windows 8.0 operating system. It was pre-installed and then upgraded through its work of departmental to 8.1 it.
2. I can't access the code of Windows because it is in the BIOS.
3. I have a hard drive to work with Windows 7 installed and tried hooking laptop to see if he should realize that he was a long shot at best. As you have probably concluded he was not recognized.
4. I thought wiping one of my hard drives and do a clean install of Windows 10.
Question: With a new hard drive (or possibly an SSD) would work #4 or I still have problems with the BIOS and Windows embedded product code?
Question: What do you suggest I should try? It's a nice little system and everything is clean and stable. I have someone who needs a system, but can't afford it, and I thought I'd give something that would meet its needs.
Thank you.
ROUTE29
Re: 4. I thought wiping one of my hard drives and do a clean install of Windows 10.
Yes, it should work, but to do this, you must either buy an OEM copy of W-10, which has its own product key.
http://www.BestBuy.com/site/Microsoft-Windows-10-home-64-bit-Windows/4423102.p?skuId=4423102
The upgraded version free of W-10, Windows 8, 8.1, 7 ended July 26.
Bev.
-
4 k editing, advice please
Hi, I have an editing work starts soon and images is 4 k (GH4) and they want that it published on the site (e.g. a laptop). I managed to borrow a Dell Percision M66000 and I really hope that's it. Any advice would be great of ge. I pronounce in 1080 p, use CC PP.
If it's really not in it this laptop only peole recoment (I think I'll have ot go used like I can't really aport more than £1000, maybe a little more). Its pretty stright documentery work, nothing too Flash.
Kind regards
Ben
Something like this might work:
Dell Inspiron i7559-2512BLK $755
15.6 inches UHD (3840 x 2160 pixels), Intel Quad Core i7-6700HQ 2.6 GHz CPU processor 6th generation Core i7 processor. need fast cpu!
at least a NVIDIA GeForce GTX 960 M 4 GB GDDR5 for reading 4 k!
Get more than 16 GB Ram $60 must be RAM!
Get a Samsung Q1 Portable 1 TB USB 3.0 external SSD $300 (based on 850pro) $300 must have read/write speed!
@ 25 hours of footage GH4, before unloading
laptop 755
RAM 60
300 usb
----
Total: $1115
but you need to install the RAM and plug in an external usb
other portable
Dell Inspiron i7559-7512GRY i7, 16 GB RAM, 1 TB HDD + 128 GB SSD $1,000
ASUS GL551
-
Menu horizontal widget - advice please
I used a widget to create a horizontal menu that runs along the top of the banner. My banner is set to 100% ' width so I wish my menu was the same, but when I put my menu 100% width it is not spread over the entire length of the page.
The left hand side reaches the edge of the browser window, but the right side ends more than a short thumb!
I feel like I've tried everything I can think of to send to 100% width but no luck so far (I'm fairly new to Muse so I can miss the thing)
Any help/advice would be very very much appreciated!
This is the default behavior for full browser width, you can use the control panel and create menu with accordion.
Please see here:
http://Muse.Adobe.com/widgets-by-category-menu-vertical
https://helpx.Adobe.com/Muse/how-to/organize-content-with-tabbed-panel.html
Thank you
Sanjit
-
Time to update computer - advice please me!
Hello
I'm about to get a new computer for my Adobe CC use, mainly for the use of Premiere Pro and After Effects. I got the following list of my son. Son advice are often good, but should always be double checked to keep the family friendly... :))
Could you, who know what to do (and more that my son knows?) Please take the time to check and comment on the following specifications. :
Motheboard: ASUS SABERTOOTH TUF 79 X
System SSD: Samsung EVO Basic 840-Series 250 GB SSD
HARD disk storage: 4 TB Seagate Desktop SSHD 8 GB 7200 RPM 64 MB
Processor: Intel Core i7 4930 K 3.4 GHz (Ivy Bridge-E)
RAM: Corsair 32 GB (4X8Go) CL10 1866 MHz REVENGE LP
Graphic card: EVGA GeForce GTX 780 3 GB SC ACX
Power supply: Seasonic Platinum 760W
He also added an extra fan: Noctua NH - D14
And Windows 8.1
Suggestions and/or comments would be very apprechiated - even if it's just: 'ok '.
Thanks in advance,
Håkan
Hello Hakan,
The minimum requirements for first Pro CC is: http://helpx.adobe.com/premiere-pro/system-requirements.html
and for After Effects: http://helpx.adobe.com/after-effects/system-requirements.html
The above mentioned specification of the system exceeds the minimum requirements and the software will work fine.
Kind regards
Rave
-
Recommendation &; advice please
Hello world
Need some advice.
I'm going to create a VM Windows 2008 R2 Standard.
The customer wants a drive C, D, E and F in windows.
Would you recommend create 1 vmdk and partition via Windows or would it be better to create a separtate for each required partition vmdk.
Are there best practices for creating Windows 2008 VM?
2nd I have issue vcpu and what the best method is to assign.
We have a HP DL360 G6, watch vi client
CPU cores: 4 x 2 Ghz CPU
Processor Socket 1
Cores per Socket 4
4 logical processors
I get really confused with vcpu as ive not been able to find a simple explanation, as I can't get my head around this concept.
Is there a rule when it comes to assign a virtual machine with more than 1 vcpu.
The vcpu corresponds to the amount of carrots?
If I assign a vm vcpu 2 he would use 50% of the available hearts and it will take 2 carrots is available before you start any cpu on task.
with the current setup, what would you recommend for vcpu config.
Sorry to ramble on so many things, its just confused.
Jitla
I use the more generally separate VMDK since these can be made larger in the future easily if necessary.
FYI vCPU, try this: http://blog.peacon.co.uk/understanding-the-vcpu/
Please give points for any helpful answer.
-
Changes did not survive the LR5 upgrade - advice please
Hello
After upgrading to LR5, I launched the application and updated the old LR4.4 catalogue.
LR5 opened very well and ultimately the entire structure of directory/photos was there.
However, all photos were in their original state as I imported them right. All the editing I'd done had disappeared.
Opening of the LR4.4, the changes are there, but not with LR5.
Can anyone offer advice how to transfer the changes to the database/catalog LR4.4 in LR5 thing please?
Thank you
I would not rely on sidecar or xmp to transfer metadata (including changes).
I would try upgrading the LR4 catalog again. In LR5, file-> catalog to open.
-
I am learning asc3 and love it. I just stumbled across a problem I tried to do a tutorial recently where loading the design of random on them cards and cards back.
I constantly get this error. If someone can you please check my work and the opinion and tell me where I made the mistake. I don't think its in the code, but the placement of the graphics, but I need a confirmation about this and also on where is the error:
TypeError: Error #1009: cannot access a property or method of a null object reference.
card / settype)
in Memory / CardLoader)
to Memory()
Please GO HERE to GET ATTACHMENT OF MY FILES THAT I MADE: http://www.actionscript.org/forums/showthread.php3?t=190078
Thank youIn my view, that he had no problem compiling. The error that show you is a runtime error. I'm assuming that your fla file will start the show as soon as it did the compilation, and it's where he hit the problem... trying to act on an object that was not in the scope. To speak with the object, it must be present, but it was 5 executives down the road.
If you want to act on it when it finally got here, you have assigned something from the outset within the Framework 1 (some variable (s)), and have little code in the frame to the bottom of the line where Load_mc is who uses variables.
What you could do as an alternative, is have the card or invisible Framework 1 Load_mc and then make it visible when you get to the image you want to show him in.
Maybe you are looking for
-
Automator email forward service
Hello I'm creating an Automator service that will allow me to select a message then right click (or use a program shortcut) to quickly create a new task within the Asana. To do this, I need to be able to create a new email with the field to the value
-
Satellite A100 - how to change owner/email at startup?
Hello When I start my Equium A100, on the screen that asks you the BIOS password, it shows the owner: and Email: and he has my number, but I need to change the email address. I can't find any setting in the BIOS to change.I also tried the supervisor
-
HP Officejet Pro 8000 Wireless: Orange and green do not print
I printed a page with a turquoise illustration, and he came out blue. I printed an alignment page, and all the printed colors, including yellow. But when I print the test page (the one with the alphabet at the top and the 5 color blocks down blocks 4
-
HP photosmart 5520 print do not correctly even with new ink
I replaced the ink of color and black ink (364 cartridges). I have no error message or anything of what I see wrong. It is a wireless printer and when I print it always printed as ink cartridges are empty. Especially the black, when you're printing i
-
Wireless not connect Dell Inspiron N5010.
I've had this computer for 2 years now. Last night the wireless off randomly, so I thought that was the internet. But when I tried to connect to a different internet, I noticed it says that my wireless is turned off. So I thought I fell just the wire