LJ 1320:1320 duplex

Similar Questions

• HP LaserJet 1320 will not print duplex on Win7 64 bit

  HP LaserJet 1320 is duplex printing is no longer. using Win7 64 bit system. I have used this printer for several years and it has worked flawlessly. Just installed Win 7 64 bit machine, has made the windows update in the choice to install printer, selected the "print on both sides" in the printer preferences. The book is re - feeds like it going to print on the other side, but a new sheet out and 2nd page prints on the 2nd feed and he re - feeds also as if printing on both sides. This used to work fine under Win XP

  Hello

  Please try to install a replacement driver to work around the problem and inform me of any changes:

  1. Run the installation of the following universal print driver:
     http://ftp.HP.com/pub/softlib/software12/COL40842/DS-99374-2/UPD-PCL6-x64-5.4.0.11744.exe
  2. Select the traditional installation mode.
  3. Set the port as LPT1 and follow the steps to complete the install wizard.
  4. Once the compelting the installation, you will notice a new icon of the listed all-in asHP Universal Print driver.
  5. Right click over the icon of LJ 1320 existing, click printer properties, enter in the Ports tab, note the port and close the window.
  6. Right-click on the universal print driver, click printer properties. Enter in the Ports tab and check the same port that you used in the original pilot.
  7. Enter in the device settings tab and verify that the unit of the duplex unit is installed.

  Now try pritner duplex using the universal print driver work.

  Please let me know if this is useful,

  Shlomi

• Windows 7 (64 bit) duplex printing on HP LaserJet 1320 using HP Universal printing PCL 5 of

  I can't duplex printing to work.  I've got the box checked with print on 2 sides.

  I drive my LaserJet1320n using the built-in function (resident operating system) PCL5 driver (as referenced by the link given by banhien) on my Windows 7 Professional 64-bit system and I have no problem with the selection of duplex printing.

• I have a laserjet 1320 and have lost share printer and duplex with new print driver.

  I guess HP is gong to do nothing about it.  So, I'll probably buy another brand of printer that will support these features in Win8.

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  Set as installed in Duplex Automatic Two-Sided accessory, click OK and check any change.

  Printer sharing is supported, it depands of operating system settings... to provide more details on the problem... I have

  Kind regards
  Shlomi

• HP 1320: HP solenoid SL3 LaserJet 1320 do not engage

  I just replaced my HP 1320 fuser unit. After put the whole printer, the output rollers are not mobile and the book of jams. I do not have a duplexer and I think SL3 solenoid must be enabled to make the rolls to work properly. The original installation is on a Win98 computer, and now I'm testing on Windows Vista. This could be a problem of drivers? Printer works fine if I open the back door. With rollers does not, printing is not going to the output tray.

  The valve is never bad.  You probably did not rear sprockets to the right or to the small room that sits on the arm of 'L' of the solenoid valve.  Watch the clip for the way the gears should be.

• Toshiba SD-R2512 1320 version firmware?

  Where can I find an original firmware version 1320 for the Toshiba SD-R2512 combo drive? Plese, just give me a link. THX

  Hello

  Check this http://forum.rpc1.org/dl_firmware.php?download_id=1703. You may find useful information.

  Good bye

• LaserJet 1320: Print multiple copies

  Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

  I suspect that the following is the case:

  • Your document is a MultiPage document (i.e. not just a single page).
  • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
  • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
  • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

  You can confirm that the foregoing occurs by:

  • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
  • Then examing initially file resulting .prn (you should be able to open it in Notepad).
  • Most of the file can be unintelligible, but initially will look like:

  

  If the command SET QTY is there, this confirms that the driver think the printer will make copies.

  If so, check the settings of the device to the printer:

  

  to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

  If the disk hard printer is set to installed, change to not installed.

  If the Mopier Mode is set to Enabled, change it to disabled.

  Then repeat the tests to see if it makes a difference.

  He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

• HP Laserjet 1320: Printer hard drives

  Is about to recycle both HP printers for new ones.

  These printers have HP hard drives:

  HP Laserjet 1320

  HP Photosmart8250

  Thank you.

  The Photosmart 8250 and Laserjet 1320 contain not all hard disks.  Make sure that no media cards are left in the Photosmart 8250, these could contain images that you want to keep.

• Pavilion g6 1320 - is: laptop won't start not

  I recently had a problem with my pavilion laptop g6 series 1320 - themselves.

  When I hit the power button a black screen will appear saying that the hard drive is not found. However, when I rebooted the system, windows load appeared but it does not connect... A black screen appears and a long time until I unplugged.

  PS. A ticking, ticking sound from the hard drive was heard during the black screen with no hard drive found error, and when the windows seem to be from the black screen following the loading of Windows.

  Would it be to say that the hard drive is in danger and it is already damaged or maybe it's a cable problem or what?

  Thank you.

  Hi @AhmedHussein28,

  Thank you for your response.

  I wasn't ignoring your information on the hard drive.  In the link I sent there is another link on the testing of hardware failures include the hard drive.

  Here is the link. HP Notebook PC - hardware failures (Windows 8) screening.  Although it lists Windows 8 steps will be the same in Windows 10.

  If you can still access Windows I suggest you protect your data to avoid loss.  There is a video in the above document on the test of the hard disk to help you.

  Good luck!

• 1000-1320 HP you laptop: Hp 1000-1320 you laptop - Thailand product. Problem with drivers

  Hello

  Hp laptop model: Hp 1000-1320 c.

  In my laptop installed windows 7 64 bit OS.

  I tried to find the drivers but could not achieve, please help me.

  Concerning

  Rajesh

  Hello:

  Your model is not supported by HP for W7.

  Try the W7 x 64 drivers and software from the HP 2000 t - 2A 00 on your model.  Do not use the BIOS or firmware files.

  This model almost the same hardware did yours.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-2000-2a00-notebook-PC-series/5259212/model/5275371

• How to find and install software for printer hp laserJet 1320 series

  We have a printers hp laserJet 1320 series in our hotel that I would install on my pc. Unfortunately, the printers custordians lost the CD and my laptop uses flash rather than CDs discs.

  Can you help me how to install the soft ware from the Internet on my pc?

  Hopeful, Aaron

  On Saturday, May 19, 2012 17:18:30 + 0000, AaronManda wrote:

  We have a printers hp laserJet 1320 series in our hotel that I would install on my pc. Unfortunately, the printers custordians lost the CD and my laptop uses flash rather than CDs discs.

  Can you help me how to install the soft ware from the Internet on my pc?

  You don't need any CD. Go to the HP Support and drivers website,
  and search for your printer. Find the appropriate driver for your version of
  Windows, download it, install it and follow the prompts.

  Ken Blake, Microsoft MVP

• Software SPSS 16.0 installation error 1320

  1320 error occurred during the installation of SPSS 16.0 (statistical analysis software).

  How to overcome the error 1320 to install SPSS 16.0?

• Cannot install HP 1320 on Windows 8.1 network

  I have Windows 8.1 on a LAN, and a HP LaserJet 1320 PCL6 printer is connected to another machine on the network.  The printer appears in the 'network' thingy on explore just as it is supposed to, so the network connection is OK.  I downloaded the latest driver HP UPD's such as recommended.  I unpacked and installed the driver without problem.   When I try to install the printer, Windows first searches the ridiculousness of "Windows update service" until finally, he realizes that there is nothing useful there (I realized this 10 years ago).  Then he invites me to provide the path to the INF of the pilot, and I do.  So far so good.

  Can I get a dialog box saying that Windows cannot find a driver.  I use 5.7.0 UPD for Windows 64-bit driver.  No known here problem?  Any difficulty?

  A weird thing is that the driver said 'PCL 5' but the printer is 'PCL 6.'  Is this a problem?

  Thanks a lot for your help.  This weird rigmarole has been around since XP.

  For the record, it wasn't the problem.  The printer is on a network print server, but Windows8 always insists to try to detect it automatically.  He finds an instance of the same printer who had been 'shared' by another computer on the network and kept insisting that it was my only choice.  The missing ingredient has been implemented in the queue for printing and port on my own desk, which must be done explicitly.  Your post brought me to realize that I had to punch down through new Anti-Productivity-layer of Windows 8 (the ' experience') for the nuts and bolts of real under.  However it is often horrible, it has at least the merit of familiarity.

• New cartridge HP 1320, installed, print without error messages and blank pages.

  HP laserjet 1320 running Windows 7 a new cartridge installed. About 20 pages have been printed perfectly well use few months. A day after the image were printed and the printer was arrested after the execution of the work; then, when the printer was turned on to the different print document, it has started printing blank pages without error since the same test page.  

  The Q5949XC cartridge was removed and turned to redistribute the toner in addition to recycle power but the problem persists.

  Please notify.

  Thank you.

  Try to print a test page for the device control panel & see the result.

  If internal printer test pages doesn't have an image printed on (blank page), try to replace (if available) by another toner cartridge or toner cartrdige tested with another printer of the work.  This is to confirm if the fault is with the toner cart. or with the printer hardware.

  If the fault is with the printer hardware, then you may have to contact HP technical support & have the product hardware identified & solved problem.

• HP 1320

  I have a HP 1320 print and when the pages are printed there is an area on the right side of the page about 3/8 "wide that prints slightly from the top of the page to the bottom.  I look for an answer and have not found an answer nere and on other forums.  Anyone have a solution for this.

  Thank you

  Terry

  Thanks, I tried both suggestions and it seems to have solved the problem.  Thank you once again, Merry Christmas and God bless.