load needed DLLs for kernel windows xp home edition

Similar Questions

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• Windows XP, computer crash, said to contact technical support, "load needed DLLs for kernel."

  What should I do now that my computer does not start? I tried F8, F10 and reboot... message came on the black screen "please contact the technical support and say" load needed DLLs for kernel. " "I do not have the Windows XP OEM or recover the disk.".

  You will probably need ot to obtain from the manufacturer of the computer for the installation diskettes (which would be less expensive to get a new XP license) and the repair of the operating system or do a new install. Keep in mind that this could have been caused by your failure to drive hard and not because of software corruption.

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• load needed DLLs for kernel

  Have an Acer Aspire one and I have this message: Windows did not start because of an error in the software. Please report this problems: load needed DLLs for kernel. Please contact your support person to report this problem. NetBook came with XP disc. What can I do? and is it possible to retrieve documents and other things?

  Check this box

  http://support.Microsoft.com/kb/326671

• help with this error message (load needed DLLs for kernel)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error message load needed DLLs for kernel in Windows XP
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·         When you get this error message?

  Refer to the following articles:

  Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

  http://support.Microsoft.com/kb/812450

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• the load needed DLLs for kernel contact the support what should I do? IAM support person lol

  trying to load xp pro and have not completed little matter what I do, it goes to this message of load needed DLLs for kernel

  Hello
  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/812450

  http://support.Microsoft.com/kb/326671

  Check if that helps.

• Need to reinstall completely Windows - XP Home Edition due to a virus

  I need to completely reinstall Windows XP Home Edition due to a virus, but the virus prevents me from doing this.  Should I start in SafeMode (F8) to reinstall it?

  Hi André,.

  Best way to clean install OS is to boot from the windows xp CD. You will need to configure your CMOS to set the boot order to CD/DVD drive as the first drive. While the XP CD in the drive start your pc, press a key when you are prompted "Press any key to boot from the CD-ROM..." Select clean install (you need to press ESC to repair the windows installation ". You will get an option to format the partition, format and install the operating system.

  Clean install will ask you to:

  -> Reactivate windows.

  -> Install all of the software required.

  -> Backup / restore your important data.

  -> All drivers.

  BTW, what is the virus, that you are not able to clean... Try to download available from www.download.com free antivrus, update and scan.

  You can also run malware-removal tools software (click on start-> Run Type & -> mrt.exe-> ok).

  Try to download www.safer-networking.org/ for spyware spybot.

  I hope this helps.

• Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition

  I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDU
  Who knows where to find the RAID driver to load when you start the installation of xp?

  This model no longer appears in the driver download section.

  Of course, it is listed by download, but the older models are listed in the ARCHIVES.

  Please visit the download page for Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp - once again and the slot type of product choose Archive.

  For Windows XP Home edition, you will find RAID driver for download.
  Can find you it?

• Need to sounds of Windows XP Home edition and drivers NIC for Satellite A215-S4817

  I removed Vista and installed Windows XP Home edition on my satellite A215-S4817 but the I am unable to get a sound or recognize NIC

  Vista drivers do not work... Help!

  Hello

  I don't know where you looked drivers but if you have a model of cell phone US please check http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  It's very good support page and I hope that here you can find everything you need. If the drivers of Windows XP Home Edition are still not listed, as European for A210 page, it means that support for Windows XP Home edition is not yet started.

  On this forum, you will find a large number of discussions on the drivers of Windows XP Home on Satellite A210. Please check. Maybe you will find some useful information.

• Need new disc of windows xp home edition

  I had to wipe my hard drive and reinstall my windows xp home edition, but my drive is damaged.  I still my drive and the key code, I just need the floppy.  Anyone know how to get one?

  If Windows XP came pre-installed on your computer, contact the manufacturer of your computer for a replacement CD. If you purchased a retail version of Windows XP, contact Microsoft.
  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals   Boulder computer Maven
  Most Microsoft Valuable Professional

• Can I get a restore CD from HP for my Windows Vista Home Edition?

  My hard drive crashed. It is in a Compaq Presario SR2150NX PC running Windows Vista Home Edition,
  that was pre-installed. I do not have the installation diskettes; but I do not have the sticker
  always on the side of the computer that has the product key. The player does not even start.
  It is quite dead. If I buy a new hard drive and install in the machine, will I be able
  to get a disk of software to replace Microsoft or HP for Vista Home operation
  No fees + port, of course, since it is a genuine copy of Vista system? I still have
  have purchase receipts original for computer, indicating the serial number, etc..
  Sorry, I'm not computer savvy and don't know how everything works. I would of course
  Appreciate any help in recovering my Vista. The error I get on my screen that says: "Reboot and".
  Select proper boot device or Insert Boot Media in selected boot device and press a key"

  Frank post replacing > you can order a disk recovery for $27 the value of ComputerSurgeons.com .

• You will need to re - install windows xp home edition after hardware failure.

  Hello

  I have an old e-machines computer desk (T1842) I bought nine years ago. It comes preinstalled with microsoft windows xp home edition, there is little time, we had a power surge in our House because of an act of God. I didn't throw this computer, so I bought a new power supply and a new motherboard for my computer running again. This is where my problem occurs, the hard drive on this computer became corrupt, and I have to re - install the operating system on it. The only software that has been arranged for me at time of purchase was a two disc set of what e machines calls "recovery disc". I tried to use these disk to get my computer running again, but there seems to be a hardware conflict now because I had to replace the motherboard, etc... What can I do to get my computer working again, of course, I still have the certificate of authenticity of microsoft / label the product key provided on the back of my computer at the time of the purchase, but the product key does not seem to help me solve this problem. I do not want to get my computer working again, it would be nice if I could get a new disk of software that would be compatible with this new motherboard, etc.. Can someone help me please?

  Thank you

  David

  FWIW... The motherboard came with a driver disk? If you use the recovery disk, I don't think you will be able to re - install windows from scratch. Even if you could you would have problems with the product key code, since the code you have is registered to the old mobo. You can click on the link below and follow the instructions to create a Utlity Cd, allowing you to recover your data on the hard drive. It is also full other little tools that will be useful.

  http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Don't have a product key for my Windows XP home edition 2002

  I was installing my Windows XP home edition 2002, because my friend told me it would help if I re installed he can fix a lot of problems, but he asked for a product key.  I don't have, what should I do?

  How to replace lost, broken, or missing Microsoft software

  Carey Frisch