Load sharing on both servers transferred to a single server behavior

Similar Questions

• The implementation of hyperion IR application load balancing while 2 servers point to a DB?

  There is a DB production. Some time need to configure the load balancer for Hyperion interactive report achieve high availability.

  As know there are a lot of method to implement load balancing, want to know if

  given two machines virtual (each of them has its own application server), and two of them going to point to the same DB via shared Assembly called/U01 player.

  After the official documentations of oracle documented, there are scarce resources can refer to, any who knew this case of configuration before?

  Hello

  We have implemented this type of solution:

  (1) server 1: install and configure in usual way. Better to use different patterns for each product.

  When you configure Reporting and analysis framework services give repository location as shared drive location.

  (2) server 2: Installation of any product that has been installed in the server 1. While configure the database for the shared services registry point to detail diagram 1 server, it automatically configure the database for all the other remaining products.

  When you configure Reporting and analysis framework services give location of the repository as a shared drive which gave in Server 1.

  Make sure that the Shared disk is accessible from both servers.

  You can deploy applications weblogic Server from Server 2 by giving details of server 1. ensure that the weblogic Server 1 service must always be upward and running for Server 2 workspace to work.

  So if we set up the web server in both servers, then you must have load balancer and configure logical web address to this server for load balancing.

  If you configure only in one of the server, then this workspace server that url will act as load swing url.the problem with this is always THAT OSH must be running or workspace url will not work

  hope you understood.

• [CARS] [root.sh FAILS] sqlplus: error while loading shared libraries

  Good,

  Let me explain the whole scenario...

  -Installation 11.2.0.3.0 RAC on RHEL 6.5

  -Silent Install (GI 4 RAC nodes)

  -Every success, except resolve.conf (that we do not use DNS to resolve the scan) prerequisites in the scene runcluvfy.sh - pre...

  -Installation launched, remote operations successful, root.sh script prompted and DAMN... gave below error

  = o/p of the root.sh on screen script =.

  User ignored the prerequisites during installation

  /U01/app/11.2.0/grid/bin/sqlplus - V... has no rc = 127 with message:

  /U01/app/11.2.0/grid/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory

  Cannot add (property/value): ('VERSION / ") for the control point: ROOTCRS_STACK. Error code is 256

  /U01/app/11.2.0/grid/bin/ocrconfig.bin: symbol lookup error: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: undefined symbol: nnfyboot

  Cannot create or upgrade OLR

  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed

  = root.sh records ends =.

  Now, this question is there for nearly 20 hours with Oracle Support and I have tried almost possible workaround suggested by Oracle Support (reboot, reinstall and...)

  Well I have no doubt in the Support of Oracle asking here on the issue, but to get chance that someone had already faced this same question.

  Now, I wish ultimately I find a culprit who are lower than o/p.

  =========================================

  [lib root@node1] # ls - ltr libsqlplus.so

  -rw - r - r - 1 grid oinstall 1477446 August 5, 2011 libsqlplus.so

  [lib root@node1] # ls - ltr libclntsh.so.11.1

  -rw - r - r - 1 root oinstall 52697691 December 10, 00:46 libclntsh.so.11.1

  [root @node1 lib] # ls - ltr libnnz11.so

  -rw - r - r - 1 root oinstall 7955322 August 17, 2011 libnnz11.so

  [root @node1 bin] # ls - ltr sqlplus

  -rwxr-xr-x 1 grid oinstall 9352 sqlplus August 5, 2011

  ======

  [@node1 grid grid] $ ldd /u01/app/11.2.0/grid/bin/sqlplus

  Linux - vdso.so.1 = > (0x00007fff7e72a000)

  libsqlplus.so = > not found

  libclntsh.so.11.1 = > not found

  libnnz11.so = > not found

  libdl.so.2 = > /lib64/libdl.so.2 (0x00000031f7400000)

  libm.so.6 = > /lib64/libm.so.6 (0x00000031f8400000)

  libpthread.so.0 = > /lib64/libpthread.so.0 (0x00000031f7c00000)

  libnsl.so.1 = > /lib64/libnsl.so.1 (0x00000031f9c00000)

  libc.so.6 = > /lib64/libc.so.6 (0x00000031f7800000)

  /lib64/ld-linux-x86-64.so.2 (0x00000031f7000000)

  ========================================
  

  your questions and comments are welcome...

  Re-install gcc libraries and test it.

• FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  Hello friends,

  After the end of my process of cloning... I try to change my login user ID pwd through FNDCPASS, but, unfortunately it show me this error as I try to used the @CMclean.sql. also, you cannot run.

  
  

  FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  
  

  Score help out me
  

  Post the details of the version of the application and the operating system.

  Have you from the correct env file before running FNDCPASS? See (Doc ID 943005.1) for more details.

  If it comes to 12.1.x on Linux OS, please make sure that you follow all the steps by (Doc ID 761564.1) / (Doc ID 761566.1) and you have all applied pre - req OS packages.

  Thank you

  Hussein

• sqlplus: error while loading shared libraries: /opt/oracle/lib/libclntsh.so.11.1: ELF file data encoding not little-endian not

  Hello

  I get the error message below.

  We have made the correction but the suite spot not be able to start the database.

  sqlplus: error while loading shared libraries: /opt/oracle/u01/app/oracle/product/11.2.0.3/lib/libclntsh.so.11.1: ELF file data encoding not little-endian not

  Need your help in resolving this issue.

  Thank you

  Srinivasan R wrote:

  Hello

  FYI,.

  We have applied the fix for database only and there's OS patching.

  Thank you

  Srinivasan R

  Realize that Oracle provides the PATCH of the DATABASE for different versions of the OS & if you apply the patch to the database for the version of Solaris on a HP version.

  then the problems will result.

  If sqlplus worked without error before applying the patch & now ENDIAN error reports, problem exists between keyboard and Chair!

• ggsci: error while loading shared libraries: libnnz10.so:

  Hello
  
  I try to install goldengate software 32 bit oel.
  
  I had this executable
  fbo_ggs_Linux_x86_ora10g_32bit.tar
  After download and extraction of V26187 - 01.zip
  
  but when I try to run ggsci
  He complains about
  
  [oracle@localhost gg_amer] $ ggsci
  ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: no such file or directory
  
  I don't see libnnz10.so on my source database. my source database is a database of GR 11, 2 and I see libnnz11.so
  ./11.2.0.2/lib/libnnz11.so
  
  can someone point me to the right direction.
  
  appreciate any suggestion.
  
  Thank you
  Kart

  1. make sure that you have installed the correct version of GoldenGate. The part number for Oracle 11 g (edelivery.oracle.com) is 26188, not 26187 (99.99% sure this is the exact reason for your error).

  2. launch GGSCI in the installation directory (even if you can boot from outside this directory, you need to address LD_LIBRARY_PATH and some other brain damage).

  3 make sure that your OS GoldenGate username is at least a member of the group that belongs to your Oracle software owner (for example, owner is oracle, group s/n, so make sure your owner member of dba).

  4. from the prompt of your OS, it seems you are using oracle, but in this shell session, is your Oracle environment squared away (ORACLE_HOME and SID, for example)?

• I have a Macintosh or a PC.  If I buy a Creative Suite, can I load it on both computers?

  I have a Macintosh or a PC.  If I buy a Creative Suite, can I load it on both computers?

  Standalone licenses are specific region and platform. Only Creativce Cloud allows you to choose between any platform and any language.

  Mylenium

• [appldev@oracletrng5 ~] $. / lanceApp/bin/sh: error loading shared lib

  Hi hussein.
  
  I got error when I start my new cloned Oracle 11i Applications in OEL5.6
  

  [appldev@oracletrng5 ~]$ ./startAPP
  /bin/sh: error while loading shared libraries: libdl.so.2: 
  cannot open shared object file: No such file or directory

  Or any command line (like 'ls', 'cat', etc.) get this error :(
  But if I am a 'root' user I can run this.
  
  Help, please...
  
  
  Thank you
  
  Published by: Crystal on February 18, 2011 17:53

  What is the error?

  Make sure that apache log files for details about the error.

  Thank you
  Hussein

• error while loading shared libraries: libdb.so.3

  Hello
  
  During the execution of adconfig, I am getting error below:
  
  / IAS/apache/perl/bin/perl: error while loading shared libraries: libdb.so.3: cannot open shared object file: no such file or directory.
  
  It's the new cloned environment 11.5.10.2 with 11g db on linux 64-bit server.
  
  I checked for rpm compat-db - 3.3.11 - 4, it is in force. What is the problem?
  
  Thank you
  Kouadio

  Hi Steve;

  Check the following note:
  On 11.5.10.2/Redhat Enterprise version 5.2, adconfig Autoconfig running. SH, Perl, error while loading shared libraries: the libdb.so.3: cannot open shared object file: no such file or directory [730656.1 ID]

  Respect of
  HELIOS

• How to balance loads on several administration servers Oracle Agents?

  Hello world
  
  We have 2 SGD servers in our environment of OEM. We want to implement our managing agents to balance the load on these 2 servers... Or if not then balance at least put in place the agents so they can access either / or WHO.
  
  I looked through the documentation and google, but can't seem to find the answer.
  
  Can someone point me to the documentation please
  
  Thank you
  R

  An agent can talk to WHO one and one alone, at the same time.

  But why load balance between them? For what purpose?

  My recommendation would be to two agents on each target with each at the same time a report on two different servers of the WHO.
  The question is not load balancing. It is fault tolerance.

• error while loading shared libraries

  Hello
  
  I'm starting with Berkeley. So, in order to learn how to use it, I decided to follow the guide getted starting with Berkeley (c++ version).
  
  When I compile the very first example (creating a DB class) with a small main application in dynamic link I do something like this:
  
  --------
  do
  g ++ o MyDb.o - c MyDb.cpp - W - wall - ansi-pedantic
  g ++ o to main.c MyDb.o - I /users/n349069/BerkeleyDB.4.7/include-L /users/n349069/BerkeleyDB.4.7/lib-D_GNU_SOURCE-D_REENTRANT /users/n349069/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
  --------
  
  But when I try to run my program, I get this error:
  -------
  . / find
  . / find: error while loading shared libraries: libdb_cxx - 4.7.so: cannot open shared object file: no such file or directory
  -------
  
  As you can see, my install of Berkeley is in a personal directory. Is that what the problem is for this reason?
  
  
  How can I solve this problem?
  
  
  Thank you for your help

  Hello

  I try but... nothing changes. I try to do this:
  ------------
  command prompt: LD_LIBRARY_PATH=/users.n349069/BerkeleyDB.4.7/lib

  Please check if you set the variable of environment successfully. To set the environment variable, please use the 'export' in this way: "export LD_LIBRARY_PATH=/users.n349069/BerkeleyDB.4.7/lib:$LD_LIBRARY_PATH". To see if it is set successfully, please use 'env' to see a list of all environment variables and check the LD_LIBRARY_PATH variable in the list.

  If it does not, please reinstall Berkeley DB. Your message, I'm assuming that you are on * nix platform. You may refer to section 27 "building Berkeley DB for UNIX/POSIX" on http://www.oracle.com/technology/documentation/berkeley-db/db/ref/toc.html

  Kind regards
  Emily Fu, Oracle Berkeley DB

• The "Console" tab fails on servers on a host ESX Server 3.5.0

  Hello

  On one of our server VMware ESX 3.5.0 123630 hosts, I get an error message when I try to use the "Console" tab on the servers located on the ESX Server.

  The error message "unable to connect to the host esx006.sb.local: a connection attempt fails, because the connected party did not properly after a period or the connection failed because the connected host has failed."

  This ESX Server is configured as all the other ESX servers in our environment, so I don't understand why it does not work on the ESX Server.

  I have no problems connecting to the ESX Server and I have no problems connecting to servers through the mstsc.

  I have the following VMware Infrastructure customers installed on my computer:

  -VMware Infrastructure Client 2.5

  -VMware Virtual Infrastructure Client 2.0

  -VMware vSphere Client 4.1

  To connect to the above mensioned ESX Server, I use the client "VMware Infrastructure Client, Version 2.5.0 Build 147704".

  Can you help me solve this mystery?

  Kind regards

  Carl-Marius

  Hi still =)

  Sorry, that you're still having problems... I hope that we will get there in the end!

  In any case, take a look at the following site, there is a solution out there that can help (it's certainly worked for several!) people who added to comments

  Please try this and let me know how you go.

  See you soon

  Waffle

• Flash Air CC iOS: problems with loading text from an external xml located on a server.

  So I have this code allowing me to load the text of an xml located on a server. Everything works fine on Air for Android. The app works even in the ios emulator, but once I export my app on my ios with ios device 7, I do not see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special authorization like on Android? IOS even allow load xml from an external server?

  Clues?

  OK, I solved the problem.

• I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

  original title: file and printer sharing problem

  I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

  Hello

  What exactly happens when you click the icon of the computer on the network map? You get the error message?

  If possible after return the screenshot of the network card that could help us help you better.

  See the bottom of the articles that might help you resolve this problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Use the network adapter to manage and troubleshoot networked devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

• ODI has no load shared members

  Hello
  I have a simple problem. I use ODI to build my BOM dimension. I get ODI errors when I tried to load the next file, attempting to add double T491-00178 members:
  
  By default, Alias, Type of data storage, calculation of re encoding, Data Base, Plan Type (COST), aggregation (COST), custom attribute, UDA, UDA1, UDA2, operation, Description, Parent, TLA currency
  T491-00178, T661-00006, Unspecified, 1, ~, updated
  T491-00178, T661-00009, SHARED, Unspecified, 1, ~, updated
  Form T661-00038, T661-00009, Unspecified, 1, ~, updated
  
  No idea what I am doing wrong? Maybe "SHARED" should be lowercase?

  Hello

  What is you get the exact error message.

  Here is an example of a model that works

  Parent account, by default Alias, data storage, aggregation
  Account, T661-00006, dynamic Calc, +.
  Account, T661-00009, dynamic Calc, +.
  Form T661-00006, T491-00178, never share, +.
  FORM T661-00009, T491-00178, SHARED, +.

  I trade parent/account tour is easier to read.

  See you soon

  John
  http://John-Goodwin.blogspot.com/