ODI has no load shared members

Similar Questions

• Cannot load dimension members in the planning by ODI

  Hello Experts!
  
  I'm new on ODI and I use ODI 10.1.3.5. I created my first ODI interface to load dimension members of account of a CSV of test with only 4 records in Hyperion Planning 11.1.1.3 following instructions of John's blog. Hyperion Planning and model file setbacks were ok, so I built the interface and run using no Agent but no lines have been uploaded in planning. The newspaper of the operator tab folder 7 - integration - statistics report execution gave the following message is displayed:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 2, in there?
  Planning, writer load summary:
  Number of rows processed successfully: 0
  Number of lines rejected: 4
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.g.y (g.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  I would be grateful on any indication as to what could be done to solve this problem!
  
  Thank you very much in advance!

  I would try to restart the application web planning to see if it clears the error message.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Issue of journal error Essbase for shared members

  I'm loading Shared members in a dimension custom in Essbase.
  
  Error log is created is as below.
  
  \\Record #1 - WARNING: account only of attributes can be defined in dimensions non-comptes
  PR0011, APP_PR, shared members,
  
  But this specific member is to take.
  
  I am only a member shared in this charge of loading and all records are displayed in form of get rejected even if most of them is to take. It is initially questions in discovering the real releases.
  
  -app

  Hi, check this box

  http://oraclebizint.WordPress.com/2008/12/14/Hyperion-Essbase-931-OBE-series-designing-Essbase-databases-BSO-outlines-data-load-global-schema-part-2-building-dimensions/

  When the generation of dimension set no parameters allow property moves and use parent/child references

  I tested it and it works

  Concerning

• Creating shared members through EAS load rule with duplicates allowed

  I'm building my first Essbase cube where I need to activate "allow duplicate member name" in the outline. I have trouble finding a way to get the shared members added to the outline via a rule of the load. I tried to run my load of rules that I used before I activated the "allow duplicates" setting, but it does not work now. It creates members in double, which makes sense to me. I don't see a setting that I can turn to get the shared members added via load rules however.
  
  Help?
  
  Thank you...
  
  Bill

  In your workload file, you will need to use full qualified member names or load rule allows to transform members to the full qualified member names.

  Go to this link and read the sections below

  http://download.Oracle.com/docs/CD/E10530_01/doc/EPM.931/html_esb_dbag/frameset.htm?dotdimb.htm

  Strengthening of the members to double outlines
  Identifies the members via the rules file
  File qualified member names through the rules of construction

• shared members disappear automatically after the deployment of the ASO cube

  Hello

  What we were doing as below:

  
  the memerbers dimension are loaded by source for epma odi, and then, we deploy the aso and epma bso cubes.

  and the process type in the profile to load dimension members is defined as "merge as primary.

  
  

  the question as below:

  (1) initially, the hierarchy of the dimension as it:

  size AA:

  A

  A1

  A2

  A3

  This dimension is aso and aso cube deployed successfully.

  (2) the users change the hierarchy of the source table.

  changed to below: (just add a parent for A1 and A2 under A initial parent.

  A

  A'

  A1

  A2

  A3

  AFTE, this changes, and members are responsible for epma once again, the hierarhy of dimension in epma is as below:

  A

  A'

  A1

  A2

  A1 (Shared)

  A2 (Shared)

  A3

  and this process of loading and applications deploy processes run automatically overnight pocess.

  I thought that I delete the A1 A2 shared hierarchy and deploy the cube again after overnight charge and deploy processes.

  But what I saw in the structure of the aso cube after the party deployed the process is also that:

  There no common A2 A1 in the sketch, but just below members in the cube hierarchy in essbase.

  A

  A'

  A1

  A2

  A3

  It's really weird, why shared members disappear automatically after deploy and make different hierarchy between epma an essbase outline

  can you help me?

  I have no idea...

  EPMA is ASO-> size is set to "multiple hierarchies enabled" otherwise please turn on and then try to deploy.

  Thank you

  ~ KKT ~.

• Moving shared members

  Gurus,

  Background:

  I update the metadata in application of ASO using loading rules. We use 2 rules of loading for a dimension

  1. for principal members of updating\creating (movements to allow is enabled)

  2. for members shared (Allow moves is OFF, as when turned on, it will move members)

  I have a single source file and how these rules of 2 load the distinction between primary & shared members is by checking 'StorageField' in the source file. (Select / option in the State of load rejection)

  v (11.1.2.2)

  Question:

  I need to move the members in the hierarchy. 'Allow the movement' moves the main members of the place where I want to create shared members.

  Please let me know if there is a way to move the members shared through charge rule above scenario or I have to do it manually.

  Thank you

  ~ RN.

  In the first rule load are reload you the hierarchy full (excluding the shared members), if you are then you could use delete option not specified in the rule of the load then it will remove all members not to load and you can rebuild shared members.

  See you soon

  John

• [CARS] [root.sh FAILS] sqlplus: error while loading shared libraries

  Good,

  Let me explain the whole scenario...

  -Installation 11.2.0.3.0 RAC on RHEL 6.5

  -Silent Install (GI 4 RAC nodes)

  -Every success, except resolve.conf (that we do not use DNS to resolve the scan) prerequisites in the scene runcluvfy.sh - pre...

  -Installation launched, remote operations successful, root.sh script prompted and DAMN... gave below error

  = o/p of the root.sh on screen script =.

  User ignored the prerequisites during installation

  /U01/app/11.2.0/grid/bin/sqlplus - V... has no rc = 127 with message:

  /U01/app/11.2.0/grid/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory

  Cannot add (property/value): ('VERSION / ") for the control point: ROOTCRS_STACK. Error code is 256

  /U01/app/11.2.0/grid/bin/ocrconfig.bin: symbol lookup error: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: undefined symbol: nnfyboot

  Cannot create or upgrade OLR

  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed

  = root.sh records ends =.

  Now, this question is there for nearly 20 hours with Oracle Support and I have tried almost possible workaround suggested by Oracle Support (reboot, reinstall and...)

  Well I have no doubt in the Support of Oracle asking here on the issue, but to get chance that someone had already faced this same question.

  Now, I wish ultimately I find a culprit who are lower than o/p.

  =========================================

  [lib root@node1] # ls - ltr libsqlplus.so

  -rw - r - r - 1 grid oinstall 1477446 August 5, 2011 libsqlplus.so

  [lib root@node1] # ls - ltr libclntsh.so.11.1

  -rw - r - r - 1 root oinstall 52697691 December 10, 00:46 libclntsh.so.11.1

  [root @node1 lib] # ls - ltr libnnz11.so

  -rw - r - r - 1 root oinstall 7955322 August 17, 2011 libnnz11.so

  [root @node1 bin] # ls - ltr sqlplus

  -rwxr-xr-x 1 grid oinstall 9352 sqlplus August 5, 2011

  ======

  [@node1 grid grid] $ ldd /u01/app/11.2.0/grid/bin/sqlplus

  Linux - vdso.so.1 = > (0x00007fff7e72a000)

  libsqlplus.so = > not found

  libclntsh.so.11.1 = > not found

  libnnz11.so = > not found

  libdl.so.2 = > /lib64/libdl.so.2 (0x00000031f7400000)

  libm.so.6 = > /lib64/libm.so.6 (0x00000031f8400000)

  libpthread.so.0 = > /lib64/libpthread.so.0 (0x00000031f7c00000)

  libnsl.so.1 = > /lib64/libnsl.so.1 (0x00000031f9c00000)

  libc.so.6 = > /lib64/libc.so.6 (0x00000031f7800000)

  /lib64/ld-linux-x86-64.so.2 (0x00000031f7000000)

  ========================================
  

  your questions and comments are welcome...

  Re-install gcc libraries and test it.

• 'Shared members' travel between parents

  Hello everyone:

  I know that it is possible to move the main members when using profiles to load dimensions of tables of the Interface. 'Merge as move' should be used to manage it. But, is it possible to configure a profile to move "members Shared" rather than "Main members"?. I have a main fixed hierarchy and another where 'Shared members' change its parent on a regular basis.

  How can I achieve this?

  Thank you

  Concerning

  Hello

  "Merge as Move" option will run only members who to true "IsPrimary.

  For your case, define the members of the hierarchy, replacing "IsPrimary' property as" true "and the main hierarchy as 'False'.» So for all parents to change on a regular basis for the hierarchy of the other, so that replacing the members of the hierarchy will be executed and moved to parent specified in the load file.

  I hope this helps.

  Kind regards
  Foudil

• ODI Error cannot load data

  Hi friends,
  
  I am new to ODI Tech I need your help to solve the following problem:
  
  My source a - 6 rows of data
  My goal is - no line.
  
  source and target texts are oracle, and I used Ikm: sql for oracle and IKM: added incremental update of oracle and sql command
  but it was still impossible to load the data.
  
  In the window of the operator, I was able to show that the data has been loaded. -in step 3.
  But to step 6 - integration - insert new lines indicating the error.
  
  Error return code: 4098
  Message: ora-04098: trigger is invalid and has no revalidation.
  
  Similarly, when I tried to enter the data into the database target manually by writing queries using Toad. He showed the same error for me.
  
  The question is with ODI or Oracle database?
  
  Is there a method to solve the problem? How to manage triggers in ODI?
  
  Thanks in advance,
  Raj.

  Raj,

  It is strictly a matter of database and nothing that ODI can do about it. This error of trigger of search in a search engine and try to find in your data base why relaxation is not valid.

• Integration services Eassbase error loading of members

  Hello
  
  I am trying to load the Member of the metaoutline that I created in the environmental impact assessment.
  This shows when loading error:
  "users choose to ignore the shared member.
  
  Please help me solve this problem.
  
  Thanks in advance
  Shiv

  It is not that a mistake by since said you that you chose not to allow running sums of shared member, so repeated members are ignored. If you want to shared members, you need to set for the dimension

• has dropped family sharing

  has dropped family sharing?

  You have a question?

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Satellite Pro M40: screen remains dark until Windows has fully loaded

  Hello to all here.
  I have a problem with my laptop. My laptop is a Satellite Pro M40.

  When I turn on my laptop, I found the backlight won't come... the screen will stay dark until it has fully loaded into Windows. I've checked all my food, and there all fine options. Even if I can get the Bios screen its impossible to read the txt because without backlight. I tried to hold the Fn & F7... joy of Noy.

  Someone at - it ideas?

  Richard

  Hello Richard

  I didn't see anything like that before and I'm a bit confused why you can't see the BIOS settings, but running the OS. Use of the FN + F7 key combination won't help because this option only works on Windows and not on the level of the BACK.

  If possible try to plug the external monitor and test again. In any case I put t think you can fix it yourself. Try please contact Toshiba authorized partner in your country. Explain the situation and see what they say.

  If you discover that something please let us know. It will be really interesting to know why this happen.

• Windows XP Service Pack 3 error "Windows has no load installer for hdc.

  service pack 3 Windows could not load the installer for hdc

  having problems installing SP3, error message "windows has no load installer for hdc.

  Hi Doug,.

  See the following article to find out how to install Windows XP Service Pack 3.

  Steps to take before you install Windows XP Service Pack 3

  See also:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• HOW TO LOAD DIMENSIONS / MEMBERS IN ESSBASE ASO REQUEST

  Hello

  We are running Oracle EPM 11.1.2.4 and created with success the planning application help EPMA workspace, it is necessary to create a reporting application. We have created a new application of ePMA workspace as essbase ASO and have dimensions of base construction and members of epma itself, the need is to have the same dimensions / members in the application (planning and ASO). My question is:

  How to bulk load dimensions / workspace members in Essbae ASO using EPMA / EAS?

  Thank you

  Concerning

  Shahrukh

  You must use the same method to load the members that you already use in EPMA, if it's a pure Essbase applications and metadata should be loaded for EPMA and not through the Regional service.

  If you already have applications of EPMA, then you would use the same method.

  See you soon

  John