LoadLibrary (pythondll) failed... c:\ProgramFiles\uniblue\registrybooster\PYHON26. DLL

Similar Questions

• specified module is not found load library pythondll failed

  Programs/Uniblue/RegistryBooster/python26.dll

  If you have installed uniblue, uninstall it, its not necessary and can / will cause problems.

  All this "SpeedUpMyPC" type of programs, paid or free, are snake oil and can cause catastrophic system problems

• UniBlue RegistryBooster is good to use?

  UniBlue and Microsoft...?

  Hello. I bought UniBlue RegistryBooster and do not have problems... However, reading some of the Q / A on the forums about the SW, I sent an email
  for UniBlue to have confirming them their relationship with Microsoft. The answer was, and I wonder if you agree with them :-)?

  Please contact us for assistance.
  It's Victoria B of the Uniblue customer support team.

  You can check the status of Microsoft Gold Partner of Uniblue on the following Microsoft Web site:
  
  https://solutionfinder.Microsoft.com/partners/PartnerDetailsView.aspx?PartnerID=a6fc7830fc1f485b85eac3905162ca2e

  Check RegistryBooster reviews:
  http://www.Uniblue.com/software/RegistryBooster/reviews/

  What is the official position of Microsoft on UniBlue RegistryBooster, and since I installed it, should I continue to use it or do something else...?

  Thank you

  G

  Hi G,
  It is true that there are negative entries on the web on Uniblue. However, keep in mind that our product has frequently over 2 million downloads a week. Our goal is to please, we offer a 60 day money back guarantee on our product that should reassure you. As you can tell from these figures, facts, our prices and our affiliation with Microsoft, customer satisfaction is paramount to us. Here's some additional reading on registry cleaning you might find useful http://www.liutilities.com/articles/do-i-need-to-fix-windows-registry/.
  If you need any additional information, feel free to contact us.
  Kind regards
  Keith, Uniblue customer relations

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• update failed error 80070643 and Setup stops working failed failing msiexec.exe application module msi.dll

  I am running windows 7 Home premium.  The first error was a failure to update office 2007.  several attempts to solve the problem highlighted windows install stopped working.  I was in the service and verified that it was automatic and started, but nothing will be installed using msi.  Here is the log of one of the failures.

  Log name: Application
  Source: Application error
  Date: 2010-10-05 19:14:09
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer:
  Description:
  The failing application name: msiexec.exe, version: 5.0.7600.16385, time stamp: 0x4a5bc3e6
  Name of the failed module: msi.dll, version: 5.0.7600.16385, time stamp: 0x4a5bda99
  Exception code: 0xc0000005
  Offset: 0x0009f9ad
  ID of the process failing: 0xff0
  Start time of application vulnerabilities: 0x01cb64e302b7335a
  The failing application path: C:\Windows\System32\msiexec.exe
  Path of the failing module: C:\Windows\System32\msi.dll
  Report ID: 418c73bb-d0d6-11df-9130-0013a9c04fe6
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      82378
      Application
      Grace-laptop
     
   
   
      MsiExec.exe
      5.0.7600.16385
      4a5bc3e6
      MSI.dll
      5.0.7600.16385
      4a5bda99
      c0000005
      0009f9ad
      FF0
      01cb64e302b7335a
      C:\Windows\System32\msiexec.exe
      C:\Windows\System32\msi.dll
      418c73bb-D0D6-11df-9130-0013a9c04fe6
   
  

  I can't find anywhere to get a new version of Installer 5.0 for windows 7

  Replace damaged by files in your DVD files:

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot install Intellimouse on XP, I got an error message: error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  Original title: cannot install Intellimouse on XP

  Hello

  I have mouse Intellimouse optical 1.1, I want to customize sound buttons.

  Recently, I tried to install its driver on laptop T410, installed with XP 32 bit operating system. Unfortunately, I got an error message:

  Error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  What is the problem?

  Thank you

  Uriel

  Hello

  Please try this and report results:

  1. Click Start, point to settingsand then click Control Panel.
  2. Double-click System, click the hardware tab and then click Device Manager.
  3. Double-click mice and other pointing devices branch to expand it.
  4. Right-click the IntelliMouse pointing device, and then click Properties.

     The IntelliMouse pointing device should be listed as follows:

     Microsoft USB IntelliMouse explore (IntelliPoint)
  5. Click to update the driver.
  6. Click Next in the Wizard update device driver dialog box.
  7. Click display a list of drivers that are known... , and then click Next.
  8. Select the Microsoft mouse driver that ends with (IntelliPoint), and then click Next.
  9. Click Next to confirm that you have selected the right driver.
  10. Click Finish to complete the installation of the new driver

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

  Original title: AppleSyncNotifier.exe and RUNDLL

  When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

  RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

  How can I fix them?

  Hi saintaugie,

  1. have you installed any Apple Sync program on the computer?

  We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
  a. to see How to change or remove a program in Windows XP
  b. in the list select MobileMe and uninstall it.
  c. restart the computer once the program is uninstalled.

  We found the same problem on the Apple Forums.
  See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error
  

  Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall a .dll file missing C:\ProgramFiles\WindowsLive\PhotoGallery\WLXPhotoViewer.dll

  When I try to open my photos file I get an error message "Missing.dll C:\ProgramFiles\WindowsLive\PhotoGallery\WLXPhotoViewer.dll" how to recover the file missing from .dii so I can open the photo files in my computer?

  Hi Jamesdonegan,

  Thanks for posting your question in the Microsoft Community forums.

  To provide the proper resolution, that I would need more information on your side.

  Did you the latest changes on the computer before this problem?

  Method 1:
  I suggest to rebuild the Windows Photo Gallery and check if it helps.

  a. click Start, select Control Panel , and go to Folder Options.

  b. click the program to Folder Options , and then select the tab display.

  c. in the Advanced settings windowunder hidden files and folders, select view the hidden files and folders.

  d. click on OK.

  e. navigate to the following folder (% of user is the name of the account that has the problem).

  C:\Users\username\AppData\Local\Microsoft\Windows Photo Gallery

  f. copy all the files here somewhere else like a back up and then delete them from the directory of the Windows Photo Gallery.

  g. once the files are deleted, try to start Windows Photo Gallery .

  Method 2:
  If the problem is not resolved, you can temporarily disable the antivirus software and firewalls and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• Oracle BI Server 12 c startup failed (could not load library nqcsfwrapper64.dll FSB)

  Hello

  We have installed OBIEE 12 c version 12.2.1.0.0 on Windows 2008 Server R2 (Microsoft Windows 64-bit). Installation successful but when we try to start Oracle BI Server, we got the following error:

  Oracle BI Server start failed. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF.

  Please help me solve this problem.

  

  Environment

  ==========

  OBIEE 12.2.1.0.0

  Microsoft Windows x 64 (64-bit)

  Here you have several details of the journal.

  obis1 - diagnostic.log

  ===============

  ...

  [2015 10-29 T 17: 03:19.905 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] [nQSError: 46136] could not load library nqcsfwrapper64.dll CSF. [[

  file: server\Utility\Generic\Src\SUGCSF.cpp; Online: 283

  ]]

  [2015 10-29 T 17: 03:19.998 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] Oracle BI Server failed to start. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF. [[

  file: server\NQSNative\Driver\Src\NQDDriverImpl.cpp; Online: 461

  ...

  obis1.out (note the time is the same as above)

  ========

  ...

  < 29 October 2015 5:03:19 PM PDT > < INFO > < NodeManager ComponentManager > < ORACLE_OBICCS_HOSTS = SBSOBIEE1:9508 >

  Oracle BI Server from...

  Failed to start the Oracle BI server.

  nqsserver: stop Oracle BI Server.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server 'obis1' with the process id 4112 is not alive; Wait for the process to die. >

  < 29 October 2015 10:03:20 PM PDT > < FINEST > < NodeManager ComponentManager > < process of death >.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server failed during startup. He could be retried according to the configuration of auto restart. >

  ...

  < 29 October 2015 10:03:20 PM PDT > < WARNING > < NodeManager ComponentManager > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\bi\config\fmwconfig\bienv\OBIS\obis.properties does not contain the environmental parameters >

  Administrator_nQSetUDML_Gen.log

  ===========================

  ...

  [2015 10-29 T 16: 45:38.700 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik:] [tid: 244] [nQSError: 28031] error: could not open the file: C:\oracle\Middleware\Oracle_Home\bi\bin\...... \user_projects\domains\bi\bidata\components\OBIS\instance_mapping\obis1\mapping.Xml. []

  file: server\Utility\Server\Config\SUSystemConfig.cpp; line: 731

  ]]

  ...

  obis1 - query.log

  ============

  vacuum

  Windows 2008 Server R2 is not an operating system supported for OBIEE 12 c. To solve this problem we have installed on Windows 2012 R2 64 bit.

• C4580 printer Installation failed with fatal error 'HPSLPSVC32. DLL failed to register.

  Try to install Windows XP Pro

  Around 58%, I get the following error

  «Fatal error during installation of the Module C:\Program Files\HP\DigitalImaging\bin\HPSLPSVC32.» DLL failed to register. HRESULT - 2147467259. Personal support contactyour.

  Please go to http://www.hp.com/support fortroubleshooting of information about "Fatal Error" and "MSI.netdevicemanager01"

  I tried after downloading the last tank and reduce the software, but the result is the same. I followed the deactivation of all services (as suggested by an online solution) and was always reboot the system after unsuccessful installsI, it did not work... googled and tried all the possible solutions.

  I use of antivirus, trend micro which is disabled for this installation. I'm intending to connect wireless printer is already installed and works wirelessly with my machine running windows xp home

  Any help to solve this problem will be appreciated because I am really stuck
  Message edited by arb_uk on 09/14/2009 16:50

  Thanks a lot DexterM for getting back to me.

  I'm happy to make you and everyone (which could face the similar question) know that the problem has been resolved with the help of the HP support. It was a problem with permissions in the registry.

  HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> SvcHost

  Right-click on SvcHost and select "permissions".

  Administrators and users should have "full control". Restart the machine and software should install

• Failed to load error programs: aushelper.dll has not been installed, and I have to re - install

  Original title: How can I reinstall the "aushelper.dll? The computer tells me that I have to, but I don't know how.

  I have an Acer laptop, given to me as a gift. All was well until after receiving a message that a virus was blocked, twice, then I realized that my wifi signal only had limited access to the network. Also several programs, including my anti virus programs load saying that aushelper.dll has not been installed and I should reinstall it.  Fine by me, but how?

  donazq

  You use AVG PC TuneUp?

  If so, try to uninstall AVG PC TuneUp and reinstall it.

• Could not locate the explorerexe component. The application has failed to start because WININT. DLL was not found.

  When I try to login, I get the above error message. When I click on ok, just a white background rises, and I am unable to do anything else that disconnect. I tried a solution I found on the internet click Ctrl alt del then Task Manager, then applications, then new task. At that time, I was to enter a code to move the DLL file, however, when I typed in what she said, I got an error message that says that I had to enter a file name.

  tammyanne,
  Thanks for posting on the Microsoft answers Forum.  We could us a little more information about this problem and your system.
  What version of XP are you running?  What service pack level are you?
  What happened before this error at startup (new software or hardware installed)?
  Are you able to boot into safe mode or run last known good configuration?  This link explains these options: http://support.microsoft.com/kb/315222.

  Let us know this information so that we can help you. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.