LoadRunner: LoadRunner fails to start with the message "there are no valid license.

Similar Questions

• I keep getting the message "there are no lightscribe devices in this system.

  I keep getting the message "there are no lightscribe devices in this system.

  I tried to open the recommended site for updates, but I get an error messasage.  Can you help me?

  Follow article

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01900020&JumpID=reg_R1002_USEN

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• "RunDLL" error starting with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll.

  Whenever I start my laptop I get a "RunDLL" window with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll the specified module could not be found."  How can I solve the problem and stop this message from appearing?

  original title: RunDLL

  Chooses a different path by doing a system restore. For me, it was a less complex approach. In any case, thanks for your response.

• Not the 'Volume Control', I get the message "there are no available active mixer device." ____

  I went through the troubleshooting help utility and when I opened 'Volume Control' I get the message "there no activemixerdevices available". I tried different things, but still no sound can u tell me how to recover the volume control because when I click on it says "there no activemixerdevices available". and when I go to control panel, sounds and audio devices it says no device and grayed out. Please HELP NEED HELP URGENT

  Update:

  I mixer by updating the driver but when I go to the sound and the device it says "No. Audio Device" in the volume tab my speakers work perfectly with my mp3

  If not, do that, if the above does not work:

  Insert your XP CD in your drive. Do not start. Then:

  Start > run > type in msconfig > OK or Enter > click on extract files > then file to extract = sndvol32.exe > then tap your CD-ROM drive as the source > extract to c:\windows\system32 > can Extraxt > crush is required > if it does not re-post.

  See you soon,.

  Jerry

• The CC extensions manager fails to start with a message "failed to initialize the extensions Manager.

  I installed via Adobe Updater CC CC extensions Manager. When I try and launch the CC extensions Manager, a dialog box appears and says: "failed to initialize the extensions Manager. It won't let me open up after I click OK and it closes.

  The CC extensions manager would conflict with Extension Manager CS6? Other possible solutions?

  I tried to restart, all the CC (and CS6 are up-to-date), and I tried to uninstall and reinstall the CC extensions Manager. Nothing has worked so far.

  Let me know... Thank you!

  Solved.

  What worked for me:

  1 remove an installed copy of the CC extensions Manager

  2. disconnect from the corporate network, log in as a local administrator

  3. download Extension Manager CC of Adobe - Exchange: download Adobe Extension Manager

  4 install

  5 kill the synchronization process of basic creative cloud with the Task Manager

  6. go in C:\ProgramData\Adobe\Extension CC\Configuration\DB Manager and remove or rename the ExMan.db file

  7. start Extension Manager and install extensions

• Satellite A200 starts with the message "missing operating system".

  IM wondering if anyone can help... I have a Toshiba Satellite A200, who, at the start, just comes up with a black screen and the "system of missing operating" in the upper left corner.

  I looked for solutions on the net. Nothing is really done. I tried to start in safe mode using the F8 function key, but it did not work. I tried to boot from a vista recovery disk. That did not work. I tried to reinstall vista and it came just with the error 0 x 80070002. Im stuck and don't know how started it in safe mode so that I can transfer data and then reinstall vista (reimage) on this subject.

  Can you make suggestions?

  Hello

  Have you tried to get into the Bios and check if a hard drive is recognized? If not, the hard drive no longer works. If so, try to make another copy of Windows disk.

• HotSync fails to start with error message

  I'm on a Palm Tungsten E2 on a desktop and a laptop with Windows XP Professional: I regularly Hotsync my Palm on the two, always selecting 'no action' for the system. Unfortunately the last time, by mistake, I chose for this option "Desktop replaces Palm", and, since then, Hotsync does more: pushing the Hotsync button I immediately get the message 'SystemMgr.c, 4038 Error launching application online. The reset button does not solve the problem. Same launch Hotsync in the Applications Launcher. Data on the Palm are unchanged and everything works very good about it, but I can't sync more wiyth my PC.

  Any suggestion? Thank you

  I just paid how to solve my problem. In my post, I said that Reset did not help. I should have specified that reset "smoothly" did not work. I did a Hard Reset, removing all the data on the Palm and Hotsync now works perfectly. I recovered all the data from the Dekktop.

  Thanks for your inquiry.

• Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

  Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

  In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

  My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

  Suggestions have greatly accepted.

  I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

  The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

  Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

  I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

  Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

• Just start with CC and there are VERY strange things boring already

  I just got on Board finally CS5 CC and these are my first numbers, if anyone can comment on, thank you:

  The launch is double to triple the time of CS5. About 60 bounces up and down, amazing. Never seen a software take so long to launch. What is happening with this? My imac 27 "has no problems with other applications.

  You open the application and there is a presentation text of text called recent items, and yet it is not clickable. I clicked and nothing happens. Then I'll file, recent items, but it is grayed out recent items.

  I choose my work space, but after that I have quit/restart, my workspace is not launched, because of the default value.

  Finally, in preferences, I choose the white light of appearance, but again, after that I quit/restart if lance in its color dark by default.

  This will help to start me, thank you!

  larry4545 wrote:

  The launch is double to triple the time of CS5. About 60 bounces up and down, amazing. Never seen a software take so long to launch. What is happening with this? My imac 27 "has no problems with other applications.

  It is certainly not true.  CC 2015.1.2 takes about four seconds to launch on my desk and less on my laptop that has two SSDS in raid0 configuration

  How many fonts you have? When Photoshop is launched, you will see the splash screen?  If so (and you definitely should) look at the progress window (framed in red in my screenshot and try and see what Photoshop does when it is at a standstill)

  

  Do you have any third party plugins or extensions?  Launch Photoshop while holding down the SHIFT key. This forces the latter supported without these plug-ins, so if it loads a lot faster, you know where to look.

  Have what arrangement of drive work you done in the preferences?  For example, if you have assigned a drive that is fault or past mode standby, Photoshop would take time wake up this drive, or decide it's OK to go ahead and use it.

  Out of curiosity, if you open Photoshop, then close and immediately open once again, it loads faster?

  That said CS5 etc, but apply to CC

  Problems with Adobe Creative Suite 6, CS5.5, CS5 launch

  Have scrutiny to this one that OSX has problems with the fonts and Photoshop

  The problems of fonts in Adobe Photoshop CC, 2015, 2014, CS6, CS5

  In troubleshooting PC posted guide, look at the permissions.

  Tried to migrate the settings of Photoshop CS5 and could well have messed up.  Try to reset the preferences (preferences > general tab)

  So still stuck, uninstall Photoshop and run the cleanup tool, and then reinstall it

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  Good luck and please let us know how you are and what the fix was when get you it to work properly.

  Thank you

• When you try to save all files on the C drive in Windows 7, get the message "There are no more files"

  I get this when I try to save all the files on my C drive. I am the only user on this laptop. It's windows 7 Home Premium 64-bit.

  So far, I've checked for viruses using 5 different scanners, check permissions, the usual stuff, but I still get it. The funny thing is if I right click on my desktop and click New txt Document that market I can type this in and click on save, but if I click Save under and rename I save as: there are no more files. BTW I free 350gbs, also tried chkdsk/r

  If you use a Comodo cleaner, which can also cause problems on Win7 64-bit. Uninstall, it helped me - problem solved! But in your case, try to understand if you have installed new software just before the fancy 'there no more files"- message began to appear. BTW, also I had BIG problems since "save under" did not work in one of my programs office to paint...

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• Windows 7 fails to start with the State of 0xc000098 error code problem

  my laptop came with a windows disc it is preloaded.

  When you try F8 start up nothing happens outside of don't go to the screen of the error.

  What should I do next

  Original title: status of problem 0xc000098

  Hello Stephen,

  We are sorry for the inconvenience. Let me help you solve the problem.

  One of the main possible causes of the 0xc000098 error may be missing or corrupt boot manager. The description of the error is related to the Windows Boot Configuration data file does contain not a valid OS entry

  As a recommendation, I suggest visit the Microsoft Help link below and check if it can help solve the problem.

  Use Bootrec.exe in the WINRE to resolve startup problems

  Refer to the section How to run the Bootrec.exe tool

  Now, one of the prerequisites before you run the Bootrec.exe tool is a Windows 7 ISO. So if you bought a full retail copy of Windows 7 earlier, you will need the product key for download support for Windows 7 directly from the download page of software to Download Windows 7 disc (ISO files) Images

  Let us know how we may be able to help you further.

  Thank you.

• XP fails to start; Returns the message "NTLDR is missing".

  Tried to "clean" boot - no chance.  Is not recovery disc.

  Tried to "clean" boot - no chance.  Is not recovery disc.

  Click on the link below and follow the instructions to create a windows utility cd. Boot from the disc. Options menu, select fix NTLDR. You may need to try all the NTLDR patches until it works.

  http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/