Satellite A200 starts with the message "missing operating system".

Similar Questions

• Satellite L300 starts with the message "JCQFX is compressed.

  I have a toshiba satellite l300 and worked very well until it turns off, when I turned on the computer laptop back it came with the message
  JCQFX is compressed
  Press the keys ctrl, alt and del to restart
  I did it but it keeps going back to the same thing, please can someone help me I am at my wits end and trying to monopolize my laptop girls thank you in advance x

  Hi the Welsh,

  Never heard about this error message then I asked Google on this subject and that therefore say: also no information :(
  Very strange

  So, step by step:
  Do you see the same behavior when you start Notepad (Windows) in safe mode?

• When I turn on my HP laptop, I get the message "No operating system". What can I do?

  My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

  My brother bought a HP Pavilion DV6 laptop, but when he turned on the first time the message "No Operating System" is displayed and nothing else happened.  Unfortunately he died on 8 April and I inherited this laptop.  Can I get the disc replacement with the operating system on them.  I have the product key of the system disks that were supposed to have been installed when he bought it.  Please notify.

  See the other answer (s) you got but also note the following: the first thing to do is to ensure that there is no CD or DVD in the drive. If it and try to boot from it, you would probably get such a message.
  If there is not, there is a good chance that the hard drive is dead and must be replaced.

• Can we synchronize permission selected with the settings of operating system Notifications BB10 for our Application.

  Steps to follow:
  BB10 device--> settings--> Notifications--> Applications--> [name of your application]--> all alerts [Toggle button]

  I have an obligation to check whether or not 'All alerts' is allowed through settings when the application is running. To check if we can synchronize permission selected with the settings of operating system Notifications BB10 for my application. How to get javascript code if alerts permission is on / off, while the application is running.

  I tried adding the blackberry.system function and tried to hasPermission (blackberry.push) also, I can't determine if permission is allow / prohibit... Please suggest how to get that.

  I don't see a WebWorks API for this. If I expected to be anywhere, it's here:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.notification.html#jbo1385148829097

  But it seems that this API has not been fully implemented; It may be useful to connect a developer Issue Tracker JIRA to get this feature added.

  At the same time, there is this API of Cascades that looks like what you're looking for:
  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__notificationapplicationsett...

  Write an extension for this feature should allow you to access this feature:
  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/template

  At the same time, a colleague is currently working on an extension that should open many features of Qt, and I think that the API above should be accessible through this extension. He must be released over the next week or two, so you can wait for that as well.

  EDIT: On this last point, see this extension which provides a mechanism for attaching in the majority of the Qt APIs.

  https://github.com/BlackBerry/WebWorks-community-APIs/tree/master/BB10-Cordova/QtBridge

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• Windows XP mediacenter edition starts with the message "Not found operating system"

  pls help..., my Acer laptop aspire 5594wxmi, windows xp Media Center Edition version 2002, service pack 3. can't run recovery... I've seen all folder and file missing in MY DOCUMENTS..., I try to make formatting back up the entire system... "Damage' does not work?, the problem is OPERATING SYSTEM NOT FOUND, even I try" backup cd "dics still return a same problem... oh my God, I m not fight... to my friend, here just ask for HELP..." Thank you.

  Hi garyquek,

  ·         Remember to make changes?

  ·         What happens when you try to use the recovery?

  You can check if this article helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• Satellite A200 starts - PXE error message

  Hello

  I have a Sat A200 woo.
  The problem started when my phone froze when I download something and I turned it off using the power button.
  But now when I turn it on it comes up with this execution environment (pxe) boot before and continues to say that the media are missing and check the cable?

  Can someone tell me how to fix it

  Thank you

  Hello

  You mean this message?

  + PXE - E61: Media test failure, check cable.
  + PXE - M0F: exit Intel Boot Agent. +

  This means that the operating system is not found possibly the HARD drive is dead, or the operating system has not been installed correctly.

  I recommend to check first if the HARD drive is seen in the BIOS. If it isn't then you should replace the HARD drive and should reinstall the operating system.

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• Re: My Satellite A500 starts with error message

  My computer laptop satellite A500, after this startup and windows open, a message from the Update Manager "error #-5, I wonder what that might be.
  My operating system is Windows 7, 32-bit 4 GB of Ram.

  Can anyone give me the solution for this error?

  Hi jun07,.

  Who Update Manager you mean exactly?
  I think that a screenshot would be very useful in this case.

  If you mean the update of Windows, you must check for Windows updates again and check if the updates will be installed.

• Re: Satellite A200 - start with BSOD

  Hello.

  I have a Satellite A200 which I had for about 18 months. I recently installed a burning software and as soon as it was completed a blue screen was displayed telling me the computer had been shut down to prevent damage.

  It then restarts automatically and I try to log on, but after about 15 seconds, it goes the same blue screen and reboots again. I tried booting in safe mode but that doesn t help.

  I m not really competent computer so I m not sure how to proceed.

  If you have any advice really id appreciate it.

  I think that if you can also boot into safe mode, you need to reinstall Windows. He s strange if your computer only shows BSOD after installing the burning software, but however, I think that there is no other way.
  Do you have what burning software installed?
  Maybe it s a virus and is not a problem of the burning software.

  So to use the recovery disk and reinstall Windows. The HARD disk is reformatted completely then backup your data first if you can put the HARD drive in an external enclosure.

• How can I reformat my laptop with the Windows Vista operating system?

  Hello

  Please advise how I can do a reformat of my laptop which runs Windows Vista OS that I don't have the CD or DVD drive? normally it is preinstalled by the manufacturer. Thank you

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Captivate 7.1 works only with the latest Android operating system

  Courses created with Captivate 7.0.1.237 do not work on shelves with the latest operating system Android - KitKat. The arrow of reading in the middle of the screen remains displayed for the duration. In some cases, it stops the course and the buttons become inactive. In other cases, the course plays, but the arrow is still there and the noise disappeared. The course work with an earlier operating system. We use the latest Chrome browser. Is there a solution? (Another edition with Captivate 8 - courses on LMS of the customer and we do not want to have to replace them.)

  Thank you

  Version of chrome 36 has some issues with captivate out of html5. Please find the following workaround if you use Chrome.

  http://blogs.Adobe.com/Captivate/2014/07/update-on-Captivate-HTML-5-content-playback-issue - google-chrome - browser.html

• Cloning with the same AIX operating system

  Hi hussein.
  
  I'm confused about cloning with the same OS but different versions.
  for example:
  I can clone EBS R12 on RHEL4.5 to RHEL.4.6? and likewise I can clone EBS 11i on AIX 5.2 to AIX 5.3?
  
  
  Thank you very much

  Hello

  Cloning of a newer version of the operating system is supported by quick Clone (provided that the source and target operating systems are compatible to the binary format).

  Note: 216664,1 - FAQ: cloning Oracle Applications Release 11i - 13. # Can I clone of a version of an operating system to another?

  Kind regards
  Hussein