Local network connection takes forever to connect at startup

Similar Questions

• 3 local network connection and local network connection

  I have a Dell with Netgear router wireless. On my computer, I have two connections to the LAN. 3 local network connection and local area connection. When I activate 3 internet works on the computer, but the wifi does not work. When I activate the connection to the internet LAN doesn't work at all. someone know how to fix the wifi?

  What else shows in network connections (start > run > ncpa.cpl > OK)?  Please list all icons.

  On the Local network connection, right click and select Properties.  Which shows in the 'Général' tab in the box under "connect using"?

  On Local Area Connection 3, right-click and select Properties.  Which shows in the 'Général' tab in the box under "connect using"?

  • With both items enabled, open a command prompt window (start > run > cmd > OK).
  • Type the following command in the black command prompt window and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  • Copy the contents of the Notepad window and paste it into your reply here
  • Close Notepad and windows command prompt and remove the file ipinfo.txt to your desktop

• lack of local network connection icon

  lack of local network connection icon

  Hello

  ·         Are you referring to the icon in the system tray in the task bar?

  ·         You can go online or connect to the network?

  If you are able to go online and connect to the network and that the problem is only with the missing icon for the local area network, then check out the link below to customize the system tray.

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-taskbar-overview

  See also

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-the-notification-area-system-tray

• Local network connection icon disappeared. Is it possible to add back?

  Local network connection icon disappeared.  Is it possible to add back?

   

   

  Close all the windows that you have open. Restart the computer.
  Please use the following tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  The tutorial has 4 methods.

  Method is a general method which, unfortunately, rarely works because the box, you need to check is usually grayed out (unclickable).

  Two method is only for Vista Ultimate and Enterprise.

  Three method applies to all versions of Vista.

  Use the Reg file download. It is simple and easy.

  * Do
  sure that you restart the computer to complete the
  procedures.
  
  Four method deals with editing the registry. If you are not comfortable doing this. Please do not. Three method is the best way to go.

• M30: Could not find a Local network connection

  Hi all, I really hope that someone can help me!
  I had a M30 Windows Home, it comes with a built-in wireless G connection (that's fine).

  However whenever I try to access my network via an ethernet cable, I can't find my LAN connection under--> network connections Control Panel.

  I have installed the last drive for the LAN (lan-sm30-xp - 56068112003.zip) available on the support site.

  I'm still not able to detect my NIC or discovered my connection to the local network.

  Any ideas?

  Thank you very much
  G

  Hello

  I agree with chance. Try to create a new connection to the local network. In addition, you can also try to run the network troubleshooter utility.

  Good luck

  Good bye

• Unknown Local network connection

  I have a Windows Server 2008r2, who has trouble downloading Windows updates.  As I looked at the IP address configuration I see an unknown connection to the local network with an address 169.254 and also a DHCP address on the connection.  I put 2 static address for this card and they work. It is an Exchange Server and the mails are very well, but updates and Internet connections are slow at best.  I think that updates may be trying to use this connection to the LAN 9 below.

  How can I get rid of the DHCP address on local network 2 and 9 LAN connection?  There is no other adapter appear in the devices hidden or anywhere where I can see.
  Configuration for interface "Local Area Connection * 9.

  DHCP enabled: no

  IP address: 169.254.1.60

  Subnet prefix: 169.254.0.0/16 (mask 255.255.0.0)

  InterfaceMetric: 5

  Configuration for interface "Local 2 network connection"

  DHCP enabled: no

  IP address: 10.10.30.116

  Subnet prefix: 10.10.0.0/16 (mask 255.255.0.0)

  IP address: 10.10.31.116

  Subnet prefix: 10.10.0.0/16 (mask 255.255.0.0)

      IP address: 10.10.40.17 -from our DHCP range

  Subnet prefix: 10.10.0.0/16 (mask 255.255.0.0)

  Default gateway: 10.10.0.2

  Metric Bridge: 256

  InterfaceMetric: 5

  Configuration for interface "Loopback Pseudo-Interface 1"

  DHCP enabled: no

  IP address: 127.0.0.1

  Subnet prefix: 127.0.0.0/8 (mask 255.0.0.0)

  InterfaceMetric: 50

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Local network connection / network cable disconnected

  I had an internet connection on my desktop and now I don't have. I have two other desktop computers that work without any problem and are connected correctly. All the workstations are connected with a Belkin Wireless G Router (F5D7230-4) by ethernet Cat 5 cables. When I go into network connections it says, the connection to the LAN is activated / network cable Unplugged, protected by a firewall. Device Status - This device is working properly. Network card: Realtek RTL8139/810 x Family Fast Ethernet NIC. The cable is connected, the lights are on on the port to connect to the back of the PC, the light is on and solid (not flashing) on the router where the cable is attached. I can take this cable and plug it into another PC and it works perfectly, but when I take an other cables and put the PC problem - nothing!

  I ran Malware, Ad-Aware, washing windows and AVG anti-virus 9 with no detection.

  Sony Vaio Desk Top PC
  Model #PCVRS410
  Windows XP Home Edition
  Service Pack 3
  Version 2002

  Any ideas?

  Thanks for any help

  Hi JamesGiannone,

  Follow the troubleshooting steps in this article to resolve the problem with a disconnected network cable.

  Let is know if this helps.

• I have windows 7 installed where I also have Internet coneection. I want to connect to another computer (with Windows xp) office in my local network connection.

  I want to stay connected to all the other pc in my local network. which are connected by rj-45 cable. When I ping any machine to xp windows from your windows pc 7 I am able to do but I'm not be able to windwos xp machine and also none of my windows xp machine shows up in my network. When I click on the network card, it shows unidentified connection.

  Hello
   
  See the article mentioned below:
  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows
   
  You can also check the items listed below:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  How to troubleshoot a network home in Windows XP:
  http://support.Microsoft.com/kb/308007 

• Why don't I have to reset my network adapter "Local network connection" every time before I can use the internet

  I downloaded the new Vista service pack 2 and now whenever I try to connect to internet, it won't allow me, and I have to reset my adapter "Local area connection".  I also suspect that it might be a registry error, but am not sure.

  I have a 32 gigabytes of gateway Home Premium 2008 computer.  Any help would be greatly appreciated.

  In addition, I'm not very proficient on the computer, please give as much detail as possible.

  Thank you!!!

  Bro, I think I've cracked it. Too, I have the same computer and had the same problem.

  Here's what I did:
  Computer-> gerer manage-> Device Manager-> network-> NVidia-> power management card, then uncheck all the boxes.
  I think that when the computer went to sleep, he turned off the adapter, and when the computer is awake, the adapter remained sleep... just a hypothesis.
  Anyway, since I made the change, I had no problem.
  Good luck!
  Vking

• local network connection missing, how to recover?

  When I open Network Center and sharing, connection to the local network is not here

  Hi Maeleatha

   

  1. is the computer connected to a network server or a domain?
  2. have you verified that the network card works correctly?

  You can follow the steps below to reinstall the network driver in the Device Manager and check-
  You can check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  a. click Startand then click Control Panel.
  b. click system and Maintenance, click Systemand then click on Device Manager.
  
  Note if control panel is in Classic view, double-click Systemand then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  d. When you are prompted to confirm that you want to remove the device, click on OK.
  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Also see the below link for more assistance on the issue and the check-

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

   

  I hope this helps.

• internet disconnection but to maintain the local network connections

  How disconnect (and subsequently reconnect) the internet connection of a computer in the network when you are keeping this computer completely connected to the local network.  I can't find a way to do it with a few simple clicks.  This is easily achievable with Network Magic, even the point of having a particular computer available in the annex "over and out" for internet and 100% available for the local network.  The problem is that Network Magic is no longer available.

  Solutions appreciated.
  

  Jayant,

  Thank you for your time on this, but I found a nice software which is more that I need.  It is at this place for others who want this feature.  I recommend that you check it out because it is very versatile, loads quickly and seems to be bug free.

  http://www.Blumentals.NET/inetprot

  Thanks again, Nathalie,.

  Aikido

• Satellite A200-1js: local network connection does not appear

  Hey people

  I have windows xp sp3 in my Satellite A200-1js but my Ethernet connection does not shut... and I saw this in my network connections:
  

  And in my etiquette system shows this:
  

  I installed the correct drivers

  Everyone knows what is happening?

  Thnkx

  Satellite A200-1js belongs to the PSAE6E series.
  Just a few questions:

  You would update you BIOS to the version of Win XP?
  If it isn't-> do this!

  Have you tried reinstalling the driver Realtek LAN 5.664.205.2007 from the Toshiba page?
  If it isn't-> do this!

• Time Machine backs up only on the local network connection

  Hello

  I have a LAN Ethernet and a wireless connection to the same network. Is it possible to force the backup Machien time to use only the ethernet LAN connection in all cases? I want to warn the TMB to limit the bandwidth of my wireless network.

  Ethernet to be the highest network interface ordered to force, and as long as you're connected Ethernet, it be the interface for all traffic.

  System-> network preferences

  

  If you want seamless switching between WiFi and Ethernet, then your router book the same IP address for the interface Ethernet and WiFi connections.  This is done differently by the router of different brands and models.  For an Airport Extreme/Time Capsule, it would be done by giving your Ethernet and TCP/IP WiFi of the same name from DHCP reservations settings, and then associate the DHCP reservation name with an IP address in Airport Extreme network settings.

• How to isolate 1 of 2 PC connected to the local network connected to an Internet EXTENDED?

  I have 2 XP PC and a new HP printer; all are connected by wire to a Linksys router who is connected to a modem, DSL - Internet AT@T so both computers can use the printer. How do I isolate one of the PC from the Internet?

  If you do this, you may want to assign a static IP address to the computer you want to isolate from the wan.  Ohterwise the IP address will change periodically

  http://PortForward.com/Networking/static-XP.htm

• Local network connection appears not to, I'm missing a Driver?

  Hello

  Today, I wanted to test Ethernet/LAN on my desk that I just got the possibility of. But when I tried to plug in the Ethernet cable to the wall I have not all connections about LAN. I also checked my adapters to see if it has been disabled, but there is no choice for LAN it is.

  So I decided to test it on a laptop to check if it was my computer or if there was something wrong with the cable. It turns out that it was my computer, like LAN worked perfectly on the laptop.

  I then decided to check my drivers and it said I didn't have a driver of Ethernet controller. So I went around the internet to find something he did, but it seems that I can't get a driver for it, and I wonder if maybe that's the problem.

  The current mother Board that I use is an Asus ROG Maximus VI Gene, and for the wireless controller, it is an Asus PCE - N10 11n Wireless LAN PCI - E Card.

  I've not seen anyone else with the same problem I have, not only on the 'forums' or the support of Microsoft, but also on other forums.

  I would get this as soon as POSSIBLE and I hope someone is willing to help and can help.

  Best regards

  Zodiac/Simen

  THE SOLUTION:

  Thank you very much for your help! But I have not found the answer here... A little.

  What I've done, is to let the auto update/device manager when you try to install a new update for the network driver search my entire drive.

  But earlier, I downloaded a driver from Intel for connections Ethernet Intel(r) (I217-V). And I guess that's the one I downloaded to adapt to what said properties.

  But when trying to install Windows would not accept. so I came here for more help.

  For some reason but now he accepted it. Could have been that I was stupid with install, but it has finally worked :).

  What I've done, it is I went to the Device Manager (control/material Panel) and Device Manager/Sound found my Ethernet controller/adapter click right on it and chose properties, here on I chose the details and on the menu drop-down I chose the hardware ID, then copy & paste the second line of text and he looked up on google and found something on Intel sites that match my line of text.

  Thank you for the help guys or girls!

  Best regards

  Zodiac/Simen