Local preview works very well - broken/erratic on iPad (through the cloud to device)

Hello.

I have a Folio that worked very well in Local mode. After having moved to the cloud, and downloaded to the iPad, the functions are either broken or irratic.

It was originally built during the last few days and has been updated in the last 24 hours - then the trouble started.

I have noticed various comments on the recent troubles Folio Builder and have v7.0.5.17 on CS5 with whatever the last Adobe Content viewer (installed yesterday). Mac is 10.7.2.

I deleted the Folio of the cloud this morning and again largely improvements articles from scratch, re-uploaded, then to the back for iPad - but not joy.

I know there is not much to go on here, but if you feel you can help, then ask questions and I will answer better I can't.

Thank you very much

You may not use any interactive element, including videos or buttons in a MSO.

Bob

Tags: Digital Publishing Suite

Similar Questions

My wrt400n worked very well, but since those days, as the internet continues to drop.

My wrt400n worked very well, but since those days, as the internet continues to drop. My modem is all good and up and running. Its router just guard fall internet. SO I reset the router and thn it works. Pls suggest a soltuion. Its very frustrating and fiddles with the work.

THX in advance

How about if you change the settings of the router wireless. Change the width of the channel at 20 Mhz and select 9 as the standard channel under the 2.4 Ghz settings. For 2.4 GHz wireless security settings, you must set the security settings wireless personal WPA2 and AES as the encryption. BTW, you have problems in your laptop only, or with computers portable mutiple because if you don't have a laptop then you must try to update drivers wireless card from your cell phone.

I have a problem with my model that I got this message in DW CS6. Model is nested inside itself? All my other pages related to the model also works very well. I tried to us the answer in this forum, but its does not work

< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml "> <!-InstanceBegin template="/Templates/index.dwt ' codeOutsideHTMLIsLocked = 'false'->
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
<!-InstanceBeginEditable name = "doctitle"-->
< title > home | Ilham group company < /title >
<! - InstanceEndEditable - >
<! - start WOWSlider.com HEAD section - >
"" < link rel = "stylesheet" type = "text/css" href = "... / engine1/style.css" / >
"< script type =" text/javascript"src ="... / engine1/jquery.js "> < / script >"
 < br / >
< div class = "marqueetext" >
< p >
< marquee >
For your static and dynamic Web design at an affordable price. Contact us:-Email: < style em = "color: #FF0" > [email protected] < /em > Mobile: < style em = "color: #FF0" > + 2349092974966 or + 234817493851 < /em >
< / marquee >
< /p >
< / div >
<! - InstanceEndEditable - >
< hr / color = "red" / >
< div id = "bodycontent" >
< div id = "organe1" >
< div class = "shadowblockmenu-v" >
< ul >
"" < li > < a href = "... / index.html" style = "color: #03F" > & deg; Home < /a > < /li >
"" < li > < a href = "... / aboutus.html" style = "color: #03F" > & deg; Who are we < /a > < /li >
"" < li > < a href = "... / aboutus.html" style = "color: #F00" > & deg; Director / General Manager < /a > < /li >
"" < li > < a href = "... / webdesign.html" style = "color: #03F" > & deg; Products < /a > < /li >
"" < li > < a href = "... / webdesign.html" style = "color: #F00" > & deg; Design of websites < /a > < /li >
"" < li > < a href = "... / jerseys.html" style = "color: #F00" > & deg; Jerseys < /a > < /li >
"" < li > < a href = "... / index.html" style = "color: #F00" > & deg; Cars < /a > < /li >
"" < li > < a href = "... / index.html" style = "color: #F00" > & deg; Laptops / mobile & accessories < /a > < /li >
"" < li > < a href = "... / index.html" style = "color: #03F" > & deg; Plan of the site < /a > < /li >
"" < li > < a href = "... / index.html" style = "color: #03F" > & deg; Contact us < /a > < /li >
< /ul >
< / div >
< / div >
< div id = "body.2" > <!-InstanceBeginEditable name = "EditRegion1"->
< h4 align = "center" style = "color: #F00" > all THE CLUBS & amp; SALES of COUNTRY & amp; CUSTOMIZE JERSEYS FOR SALE! < / h4 >
"< a href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage ('Image4 '", '... / Images/CJ4Sale.jpg ', 1) "> < img src =" "... / Images/BJ4Sale.jpg" alt = "Jerseys For Sale" width = "200" height = "150" id = "Image.4" align = "left" hspace = "10" / > < / has > "
< style p = "color: #000;" do-size: 18px; "> we recently ventured in Customizing T-shirts for opportunities & amp; Swimsuits for all your favorite clubs. We look forward to negative reviews as to help us improve our quality of production because we are full of optimism & amp; We would appreciate ideas for the improvement of the company. Just kindly feel free to fill out our feedback form and make a comment. We would work on getting improved based on your comments for us all (you) our many customers. < /p >
<! - InstanceEndEditable - > < / div >
< div id = "body3" > <!-InstanceBeginEditable name = "EditRegion2"->
< h4 align = "center" style = "color: #F00" > CARS, JEEPS & amp; SPACE BUS FOR SALE! < / h4 >
"< a href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage (' picture5 '", '... / Images/Cars4Sale.jpg ', 1) "> < img src =" "... / Images/Car4Sale.jpg" alt = "Cars, Jeeps and buses to sell space" width = "200" height = "150" id = "Picture5" hspace = "10" align = "left" / > < / has > "
< style p = "color: #000;" do-size: 18px; "> we have been in the field of selling all types of vehicles 6 years. We provide well conditioned vehicles and quality to our customers that makes us among the best dealerships in the city. We meet our customers satisfaction. Today we took some sellers as an Old Timer. They think they know everything, they will not learn new things, they are medium-sized (or average) sellers and they take a lot of pleasure to bring new sellers their low level. < /p >
<! - InstanceEndEditable - > < / div >
< div id = "body4" > <!-InstanceBeginEditable name = "EditRegion3"->
< h4 align = "center" style = "color: #F00" > PORTABLE computers / PHONES & amp; ACCESSORIES FOR SALE! < / h4 >
"< a href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage ('Image6 '", '... / Images/CP4Sale.jpg ', 1) "> < img src =" "... / Images/Laptops4Sale.jpg" alt = "laptops / phones and accessories for sale" width = "200" height = "150" id = "Image6" hspace = "10" align = "left" / > < / has > "
< style p = "color: #000;" do-size: 18px; "> we have been in the business of selling all types of laptops, phones and accessories (new Branded, used UK and Nigeria used) for 8 years. We provide qualities, laptops, phones and accessories to our customers that makes us one of the best sellers in this case. We serve our customers to their satisfaction by offering very good wishes all our customers a very respectful ways both on call, e-mail as well as in our office. < /p >
<! - InstanceEndEditable - > < / div >
< / div >
< div > <!-InstanceBeginEditable name = "EditRegion4"--> <! - InstanceEndEditable - > < / div >
< hr / color = "red" / >
< div class = "footer" >
< div align = "center" > copyright & copy; 2015 ilham group company < br / >
Design by: Ilham moldy < br / >
All rights reserved. < / div >
< / div >
< / div >
< script type = "text/javascript" >
var MenuBar1 = new Spry.Widget.MenuBar ("MenuBar1", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})
< /script >
< / body >
<! - InstanceEnd - > < / html >

The next line tells me that it is not a template file, but a document created from a template called index.dwt

http://www.w3.org/1999/xhtml">

This means that you have saved a child document under template at some stage.

If you go to edit-> models-> detach the model, you can remove the structure of the model of your document. All you then need to do is to re - save the document as a template.

Google product-i/google, gmail, etc. does not load on firefox, but they work very well on Chrome - that happened during the night - is taking control of google or hacker?

I / google was my home page - one morning I opened FF and place comes TEXT - as a default text with html went. Do not remember if I had downloaded Chrome before or after that. I also tried YouTube and could not get my upcoming account. I created a new account gmail on Chrome and tried to access on FF and the loading screen came but FF could not load - expired - but the loading bar had no activity. In any case, I guess I'm not smart enough to understand. Someone else has reported this 'cover of google. I am a loyal fan of FF.

Perform the suggestions mentioned in the last three articles provided in my previous answer.

iOS app works very well upstream, but after downloading through developer account, it is said that it can not connect.

I get the splash screen, then a loading animation, and then it throws an error saying that it cannot connect. Any ideas?

You publish the collections and objects?

Real-time application does not work; source code works very well

The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

After years of work very well and no recent change, my thunderbird now refuses to retrieve emails from one of my 3 email addresses. What should I do?

Last week he had slowed down considerably in the recovery of messages to this e-mail address, but now it doesn't work at all. The other three addresses properly.

The email address that does not work very well on my phone and on the webmail, but not on thunderbird.

You can do this:
- Create new folders if necessary.
- Move all emails that are in the Inbox in the appropriate folders.
- Delete emails you don't want to.
- When the Inbox is empty, do a right-click on the Inbox, and then select "compact".
- then try Get Mail.

WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?

Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.

The solution is simple... Press reset and redo the Express installation.

NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.

How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

Switch issues. Help, please.

How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

-Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
-Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
-Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router. In addition, what is the model of the switch?

To save the manual copy and the new hits of the ipconfig/all command output-

First connect through switch.
Open a command prompt window (start > run > cmd > OK)
Type the following lines in the black command prompt window and press ENTER after each line

echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
Notepad '% UserProfile%\Desktop\ipinfo.txt '.
output

Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

You can delete ipinfo.txt on the desktop when you are finished.

I upgraded my laptop to windows 8 unfortunately Shamela library doesn't is not display Arabic titled correctly. I must say it worked very well under windows 7, what should I do?

I upgraded my laptop Toshipa from windows 7 to windows 8, library Shamela worked very well under windows 7, now after the library Shamela upgrade does not work properly and the titles are written in the language of gibberish. Any solution please

Are you referring to a custom library that you created?

If you are, try to remove the library then re-create and see whether or not it appears correctly.

Photomerge works do not cc2014. By aligning the works but really bad mixture. works very well in cc

Photomerge works do not cc2014. By aligning the works but really bad mixture. works very well in cc

After resetting the preferences in cc default 2014 seems to work better.

When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

VIsta - Local access only

HI -.
I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

The router also works very well I'm able to connect with my iPhone and IPad without any problem.

But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

It's a Dell Studio 15 with Vista.

The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

This has been very frustrating.   Thanks in advance for any help or suggestion.
Staci

Hello Staciusa,

Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

Take a look at step 6 in this article that give more details about it:

http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

Something happened that broke my remote desktop connection.

System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system. Help, please!

Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

There are major problems with this page as shown in the screenshot below.

This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout. This isn't what APDivs were intended. That's why Adobe them removed from DW. Unfortunately, not soon enough.

I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

Either way, Flash is dead now. Most of the people cannot display Flash media more. You can convert the HTML5 video or use YouTube to host videos now.

Nancy O.

Java plugin does not not in Firefox 4.0b11, works very well in 3.6.13

Java plugin is not loading in Firefox 4.0b11, but it works very well in 3.6.13 (and in Google Chrome too). It worked in Firefox 4 before, but broken somewhere around beta 5. libnpjp2.so is not really in the plugins folder, but it is a symlink: /libnpjp2.so -> /usr/lib/jvm/ia32-java-6-sun-1.6.0.12/jre/lib/i386/libnpjp2.so. When running the command line, I see FF tries to load other plugins of symbolic links (most associated with totem) but do not because they are amd64 and FF is built in 32-bit. But none of the messages on libnpjp2.so (which IS 32 bits).

Java 1.6.0.12 is old enough, then you can try to install the latest version of Java 6 U23.
- http://www.Oracle.com/technetwork/Java/javase/downloads/index.html (Java platform: download JRE)
See also http://kb.mozillazine.org/Java

Local preview works very well - broken/erratic on iPad (through the cloud to device)

Similar Questions

Maybe you are looking for