Locat Disck problem K

Similar Questions

• location bar problem: cannot delete url

  I have two URLS that keep reappearing in my address bar history. I erased the history several times and next time think I start Firefox (v7 & 8) they come back! I highlight, press the DELETE key and they go away but come back the next time Firefox refreshes or begins.

  A URL is the store that sold the computer the other is simply a site I visited. I searched the registry and found nothing.

  All other URLS can be deleted permanently until I enter them, but not these two!

  Ideas?

  Entries in the bar location drop-down list with a yellow star (blue on Mac) at the right end of the bookmarks and Scripture cannot be cleared from the location bar menu drop down with the delete key.
  
  You can delete this an item marked with a bookmark that appear in the list, if you open this url in a tab and click on the yellow star in the address bar.
  
  This will open the "Edit this bookmark" dialog box and you can click on the delete button to delete the bookmark if you want to delete such an entry marked with a bookmark.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.com/kb/bookmarks+not+saved#w_places-database-file

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Location of problem at run time components

  Hello

  I have a list of GridFieldManager in the optimization of resources, and in each GridFieldManager 4 components are placed:

  ___________________________________

  Robert BitmapField Label check box

  ___________________________________

  Peter BitmapField Label check box

  ___________________________________

  Hercules BitmapField Label check box

  ___________________________________

  Check hot BitmapField Label box

  Row labels are objective with the respective ID. Like (1, 'Robert', 'Label'), (2, 'Peter', 'Label'), (3, 'Hercules', 'Label'), (4, 'hot', 'Label'), etc.

  Added all the boxes & all the runtime only. Boxes are registered in Cookie [with him] checks the object mentioned above.

  I find problem in order to find the proepr fields. Sometimes something works sometimes it doesn't. Does not include or how to code for it. Once located properly I have to remove them. This part does not work properly. But the location more of 3 fields creates problems.

  My code is:

      private void getListOfSelectedMails() {
          selectedMails = new Vector();
          for (int i=0; i < checks.length; i++) {
              if (checks[i].getChecked() == true) {
                  MailMessage mm = (MailMessage) checks[i].getCookie();
                  selectedMails.addElement(mm);
                  System.out.println("Added " + mm.index + " To selectedMails vector");
              }
          }
          System.out.println("selectedMails Size = " + selectedMails.size());
      }
  
      private void deleteMails() {
          int fieldIndex;
          for (int i=0; i < selectedMails.size(); i++) {
              MailMessage mm = (MailMessage) selectedMails.elementAt(i);
              fieldIndex = (mm.index * 2)-1;
              if (i > 1) {
                  if (i%2 != 0)   // Odd
                      fieldIndex = fieldIndex +2;
                  //if (selectedMails.size() > 3) {
                  //    fieldIndex = fieldIndex -2;
                  //}
              }
  

  System.out.println("i = " + i + " fieldIndex = " + fieldIndex + " Mail TO FInd = " + mm.from + " ,  " + mm.index);
  

  if (inboxMsgs_vfm.getField(fieldIndex) instanceof GridFieldManager) {                GridFieldManager gfm = (GridFieldManager)inboxMsgs_vfm.getField(fieldIndex);                CheckboxField cb = (CheckboxField) gfm.getField(0);                MailMessage cb_mm = (MailMessage)cb.getCookie();                System.out.println("Mail Found = " + cb_mm.from + " ,  " + cb_mm.index);
  
                  //inboxMsgs_vfm.delete(inboxMsgs_vfm.getField(fieldIndex));                //inboxMsgs_vfm.delete(inboxMsgs_vfm.getField(fieldIndex));                //invalidate();            }
           }
       }
  

  The code above works perfectly selected 3 checkboxes:

  selectedMails Size = 2
  I = 0 fieldIndex = 3 Mail TO FInd = Peter, 2 Mail Found = Peter, 2
  I have = 1 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =

  selectedMails Size = 3
  I have = 0 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =
  I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
  I have = fieldIndex 2 = 11 Mail TO FInd Silva, 6 Mail Found Silva =, = 6

  selectedMails Size = 3
  I have = 0 fieldIndex = 5 Mail TO FInd Hercules, Mail Found Hercules, 3 = 3 =
  I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
  I have = fieldIndex 2 = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

  selectedMails Size = 3
  I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
  I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
  I have = fieldIndex 2 = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

  selectedMails Size = 4
  I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
  I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
  I have = fieldIndex 2 = 11 Mail TO FInd Silva, 6 Mail Found Silva =, = 6
  I have = 3 fieldIndex = 15 Mail TO FInd = Robert D'Silva, Mail Found Divas, 8 = 7

  Tried to uncommentng the selectedMails.size () if & results:

  selectedMails Size = 4
  I = 0 fieldIndex = 1 Mail TO FInd = Robert D'Silva, found 1 Mail = Robert D'Silva, 1
  I have = 1 fieldIndex = 7 Mail TO FInd hot =, 4 Mail Found hot =, 4
  I have = fieldIndex Mail TO FInd Silva = 2 = 9, 6 Mail Found = Cool, 5
  I have = 3 fieldIndex = 13 Mail TO FInd = Robert D'Silva, 7 Mail Found = Robert D'Silva, 7

  You can see the size = 4 previous 7 SOPS was not avbl, after uncomment 4 is avbl but 6 not located correctly.

  Can someone help me how to localize these fields correctly. Have tried many variations in the code, but nothing has worked perfectly for everyone.

  Thank you

  > fieldIndex = (mm.index * 2)-1;

  It is very good for the 1st field. When 1 field is removed, as well as the added line is also removed. So here, if I have 5 rows then 5 + 1(on top) lines also, fieldCount total will be 11.

  For this issue, fieldIndex = (mm.index * 2)-1;

  does not provide correct results for all fields.

  Peter, tried to add checkbox rather than MailMessage, but again without success. One or the other of the average index does not work correctly.

  Tell me something, I may be wrong in one of the points that I GUESS,

  • After you have removed and calling invalidate() 1 rank and the next line of the optimization of resources whose index is 1 and 2, the line and the next line will be placed in the position of the field 1 and 2, right?
  • I use mm.index which is the question for the removal of several lines. Suppose that am abolition of the 1, 3, 4. Position of field for 1st row 1 & 2, 3rd row = 5 & 6, 7 & 8 4th. It's the resukt I am using the formula above for fieldIndex = (3 * 2) - 1 = 5. But when the 1st row is deleted, the index for the 3rd rank becomes 3 & 4 and becomes for 4 rows 5 & 6. This is wrong.

  I follow something like the number of deleted rows

  1st row = 1 & 2

  3rd place - (3 * 2) - 1 = 5-2

  Yes. I added a deletedFields field in deleteMails and on the deletion of a field add + 2 to the deletedFields.

  To define fieldIndex perfect,

  If (mm.index == 0)
  fieldIndex = 1;
  on the other
  fieldIndex = (mm.index * 2) + 1;

  If (deletedFields > 0)

  fieldIndex = fieldIndex - deletedFields.

  With that all the records are deleted properly without additional programming.

  Earlier, when I started to code the GUI for I think that its not easy and the most appropriate Add Checkbox in ListField, with listener added to the box. How is that? Simon, your articles also shpwed me listener on the line field in the list complete and not only on the box. If you add the box to check for ListField with listener added to it and do not select the entire line, I would try to apply instead of what I had done so far.

  Can someone tell me, is the highest point possible using ListField?

  Thank you

• Storm Smartphones TELUS blackBerry, gps location satellite problem help?

  Hi, I had the version of telus to the storm today, updated software, pulled battery.

  as soon as I got it, I tested it on the bbmaps on gps and he finds 10 satellites.  I charged the phone and then I couldn't find more satellites, I tried flying around my car, I tried, just walk outside.

  I had a similar problem with the telus htc touch pro.  It would work once they have activated the phone after an hour or so there problems of location satellite signal, but only once in a little while I might be able to lock.

  I don't know if they did this on purpose so that I have to use their paid browser or that there is some conflict with the gps settings.

  CUS, in this case on 2 different phone, but after that the first hours of the couple the gps is not completely disabled because I was able to lock more but very rarely.

  any ideas?

  Problem solved, anyone with a gps problem should just look for the fix of storm from telus on google

  you will need to change some IPS with the software so that it allows you to lock onto satellite.

  The reason why it worked for me at first is because the phone probably already got activated for the telus network not had the possibility to change the settings on the phone.after that the gps is really limited.  can connect to a gps 1% or less of the time.

  but after that the gps fix can be locked in a few seconds, even indoors.

• Location map problem

  I have problems with the map of the location on the elements. It appears empty and cannot locate any new photo of my photos or the tag. Have tried restarting PC running a software update and but no luck. Any thoughts? Thank you

  The PSE Organizer map was a map of Yahoo. Yahoo has discontinued its mapping service, so it does not work for everyone and there is no cure, I'm afraid. He just disappeared.

• Location of problem properties file

  Hello
  
  I have a file of properties located in the resources in the navigation Application. I'm trying to access this file while running my application on server default wls.
  
  In my ConnectionService.java:
  

  public class ConnectionService {
      Properties properties = new Properties();
      
      public ConnectionService() {
          FileInputStream input;
          try {
              input = new FileInputStream("Connections.properties");
              properties.load(input);
          } catch (FileNotFoundException e) {
              e.printStackTrace();
          } catch (IOException e) {
              e.printStackTrace();
          }
      }
  ....

  When running on the server, this translates

  java.io.FileNotFoundException: Connections.properties (The system cannot find the file specified)

  However, if I create a main method in ConnectionService and run the same code, accessing it.
  

      public static void main(String []args){
          ConnectionService con = new ConnectionService();
          FileInputStream input;
          try {
              input = new FileInputStream("Connections.properties");
              con.properties.load(input);
          } catch (FileNotFoundException e) {
              e.printStackTrace();
          } catch (IOException e) {
              e.printStackTrace();
          }
      }

  Why it doesn't work when running on the server? I watched the deployed files and the structure looks the same.
  
  Thank you

  The file is searched for in the project directory when executing the main method, but this isn't that way when running WebLogic... you have two choices:

  1. place the file in the classpath and get it with this.getClass () .getResourceAsStream () javadoc version.
  2. the second option is to use ServletContext.getResourseAsStream (path) - the path must start with a ' / ' and is interpreted compared to the current context root.

  Unfortunately in WebLogic request.getContextPath () returns null, otherwise it is used to get the path to the system to the application and load resources into the application

  agruev

• MainStage 3.2.3 CPU problem unsolved

  Please see the video: https://youtu.be/_cpVa64tmrY

  cpu problem in the mainstage 3.2.3

  the video has been used in the same concert, perform the same functions, the difference is absurd.

  Yes, I see this same thing going MS 3.1.1 3.2.x. It was not a 3.2 version that works for more than 25 minutes without serious crackling and stuttering with a concert that I use all the time with absolutely no problem for hours overnight with 3.1.1.

  I spent days trying to track down the issue. I use a lot of 3rd party software, but I have not been able to isolate an offender. If I use a sheet of Apple in the only project, everything works fine. But, my usual concert uses a lot more memory and some of the plug-ins are much more intensive CPU. I'm starting to wonder if there is a threshold of memory and use CPU causing instability in point 3.2. Unfortunately, it seems almost impossible to load enough instruments EXES to get closer to the memory usage that I use regularly with my native instrument patches, so if my threshold theory is correct, I did not spent yet. At the moment, I'm so tired to lose time trying to locate the problem, I'm pretty well reconciled with the use 3.1.1. It's very frustrating, yet. There is no doubt that something fundamental has changed, but it does not have an impact on a large number of people. I'm afraid that those of us with these problems are on our own until we can come up with something concrete to show Apple so that they can remedy.

  So, I'm curious to know what operating system you are using and whether you use 3rd party plug-ins. In your video, I see that you do not use a lot of memory, makes me think that I'm wrong about the memory being an issue. Anyway, if we can find things that are common to our configurations, maybe this will help point to the problem.

• Several problems with Satellite L40 - 18W

  My Dungeon movies on jump images and sound.
  1. this happens usually when I use Kmplayer, when I use VLC, it's fine, but sometimes even with VLC the problem remains.
  The film works very well on an Acer Aspire 4315 with even the Kmplayer.
  It's driving me crazy!
  I tested the video memory, motherboard, CPU, Ram and so on. Everything is fine! Just peachy!
  I even had a BIOS update 3 days ago the same problem!
  I use XP SP 2 uualy, now I use Win7, the problem is the same! I just can't understand it!

  2. two weeks the Toshiba would ' t boot, he keept restarting. When I tried to do a clean install, this allowed me to run the installer until the installation XP partion apeared. It didn't matter what I would press on install, delete, Format, etc. The result was the same, he kept always restarted at this point.
  I managed to locate the problem, the second location of the ram, but the RAM was ok. But eveytime that slot ocupied, kept restarting the laptop.
  With just a RAM, in the first place, the laptop was fine.
  Eventualy I did a BIOS update, and it seems it's ok. But still... what the hell?

  3 and the temperature of the Cpu on the "idle" mode is another about 70 every time. And no there is no dust in the cooling module, yes the fan works and yes I use event buffer external coolig. What is the right temperature? Normal?

  Post edited by: menssana1984

  # Kmplayer is unknown to me and I use VLC or Windows media player. I put t know what films you watch (DVD file or avi) and why this happens. It is not easy to discuss the problems that sometimes occur. Maybe an application runs in the background and when HARD drive is busy with something like this can happen.
  # More important, is that everything is OK now. :)
  # The CPU temperature is certainly not politically risky or critical. You can try to exchange the thermal grease, but be careful with this. Is Toshiba using own fat and you need to know how much should be placed here (usually 0.25 ml). I hope you know what you're doing.

• Technique to locate VI which is 'suspended' / waiting for debugging. Pause button - does not work.

  During development, I have experience at the time that the high-vi simply "blockages". The debug break button does not break in the program - it turns red but nothing happens.

  I can stop with 'Button give up', but then I see not how vi was stuck in a wait state - this information is lost.

  Is there a way to determine 'the State' s sub - VI in a running application (during development).

  as a list:

  A.I: running

  B.VI: IO queue, in queue or similar

  C.VI: finished

  This would help locate the problem.

  Some clever stuff?

  I looked on the forum I thought that this was discussed previously, but I found this thread:

  http://forums.NI.com/T5/LabVIEW/how-to-find-which-sub-VI-is-running-in-highlight-execution-mode/m-p/...

  If your problem is easily reproducible, you can use the option 'Retain the values of thread' to see what happens and when (the "last updated" timestamp is saved and you can read it with a probe).  In this way, you can quickly follow the data flow and see where your program hangs.

  Otherwise, you can dig into your subVIs and watch the execution of each arrow.  Search in the help file "VI-toolbar buttons" and look at the top of page three icons.  An icon is actually absent from this list, and it's another arrow, slightly different performance, which indicates that the VI is part of a running application, but is not running.  By finding that VI is in fact running vs. just waiting to be called, you can find out where your problem is.

• Loading problems

  I recently moved... the internet service where I am is wireless. I can access any application except for happy aquarium on Facebook.  I asked several times for assistance through support on Happy Aquarium and quite tab they asked me to do it without any result.  When I try to open the aquarium itself it s tell me the web site is busy.  It is accessible via other computers... I have the latest java, internet etc... can you help me

  Hi sissy girl,.

  Can I know what web browser are you using to play Happy Aquarium?

  Please follow the steps in troubleshooting below valid for Internet Explorer and see if the problem is resolved. Also, try in other web browsers and check.

  Step 1:

  Disable your Antivirus firewall software temporarily and check if you can access. Be sure to reactivate after a repair.

  Step 2:

  Check if the problem persists in Add-ons - Internet Explorer no. mode.

  1. click on start.

  2. click on all programs.

  3. click on accessories.

  4. click on system tools.

  5. click on Internet Explorer (No Add-ons).

   

  If the issue is not persistent, one of the add-on is the cause of the problem. Please see the steps below to locate the problem add-on.

  1 restart IE normally.

  2. click on tools.

  3. click on Manage Add-ons.

  4 disable add-ons by clicking on them one at a time to highlight and then click Disable.

  5 re - activate the modules one by one and check with what add-on, you get this error message.

  6 turn off the add-on at the origin of the problem.

  Step 3: -.

  Optimize Internet Explorer to clear the data in the cache and temporary files. If this fails, you can try to reset the settings of Internet explore and check. Please visit the link below for the optimization of Internet explorer which explains the steps described above.

  http://support.Microsoft.com/kb/936213 how to optimize Internet Explorer

   

  Hope this information helped you.

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems of Virus and security possible - Win32/PowerRegScheduler

  Operating program: XP Home edition

  Model: Samsung N140

  Question: The problems of security and viral infection

  Hello

  I'm sorry that I don't really have a great understanding of the computer virus so I don't know what information is relevant. I think most of what follows suggests an infection by the virus:

  I recently updated my free version of AVG Anti-Virus Free in the new 2011 edition. During installation, it has encountered an error (I don't remember details, possibly missing dll files) so I decided to cancel, restart my laptop and try again. When my laptop from loading until he said that there was a problem one windows had begun a check disk on drive C. It became clear and if I booted up and installed the AVG software.

  This seems to be the point at which the following problems started. It may have been independent, but it seems to me as an opportunity where my laptop's security has been compromised.

  Since the installation, I have a number of security issues. I first noticed security warning balloon popping up at startup alert me that my firewall or my anti-virus software has been active in. I have not installed a firewall and account on the firewall of a security xp at this time. My laptop has anti-malware/spyware called "Spybot Search and Destroy". As mentioned earlier that my anti-virus is AVG Free edition. The firewall when checked reading disabled until the computer was nearing completion with respect to the start of all substantive programmes and anti-virus and anti-malware programs would read the same thing, are they loaded at all. (Also, I'm not sure if this is relevant, sorry again, but the menu at the top of the AVG Software bar flashes briefly when you hover over a button, briefly displaying a sign different menu under: S)

  As I try to keep my computer up to date for all programs, I check the windows updates regularly. For the first two weeks (before the avg installation problems), I didn't have a problem, but more recently Windows Update stopped several times to answer once started and only after several attempts to close the program and then restarting it again it will work

  After reading briefly on latest threats virus (Win32/Sality.AM, containing similar symptoms) I decided to use the Windows Live OneCare safety scanner. He detected a medium threat program: Win32/power Reg Scheduler. This program did not appear when I ran this scan before and nothing appeared on an AVG scan at all.

  All the details are:

  Program: Win32/power Reg Scheduler

  c:\Program InstallShield installation information\ {f31bc49f-ab7b-4a53-a399-eb7331b585bc} \data1.cab

  After a failed attempt to delete it also says:

  detected: (inshld #0004)-[rsrcemb]

  Any advice on how to remove the virus if it is indeed a would be useful and appreciated. I would like to use anti-virus software to remove it but the AVG software does not locate a problem and care scanner a Windows Live is unable to clean it up. If it does not seek to be a virus no matter what other help to solve security problems would be useful.

  Thanks for any help and I'm sorry for the length of this article. I would like to shorten but I don't really know what that is and is not important.

  MrPanda

  What happened is that when the installation failed, left it "garbage" files that are trying to work, but can not function properly.  These files are what caused the error that you are experiencing.  My advice is first perform an uninstall of the avg anti-virus (I say this because to say what your first post, you had a corrupted/defective update of the old version (2010 I guess)).  After uninstall you AVG AV, double check that all the avg files have been properly removed.  After that, install AVG AV of the downloaded installation.  Here is a link to the avg homepage, they have the free download on the cover page:

  http://free.Avg.com/us-en/homepage

  I hope this helps!  If it isn't, feel free to write me at:

  E-mail address is removed from the privacy *.

  I'll do what I can to help out you.

• The tabs in Word table display problem.

  When I select several lines in my Word table is 'all or nothing' will display the tabs apply to all lines.  Could not locate the problem.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Microsoft Word and would be better suited in the Group Discussion in Microsoft Word. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Audio problems with real Z10

  I got my Z10 Limited Edition a few days ago.  I found that my digital organ application does not work correctly (make a funny noise) on the Z10 but perfectly on the Alpha A Dev and Dev Alpha B.

  Could someone with a real Z10 (not the real) and Dev Alphas download my application and let me know if it works?  I'm unable to locate the problem.  Thank you 1 million.

  Thank you all for all the help.

  I tracked down the problem.  Something seems to be off with my location memory buffer.

• Since the installation of money, more sleep Sun, when I open money, a box appears immediately shows "money has encountered a problem and must be closed.

  Original title: impossible to go beyond opening money PlusSunset

  Since the installation of money, lie the Sun when I open money, a box appears immediately watch "money has encountered a problem and must be closed" I had deleted the previous money programs before installing the new version and visa versa with the same results. At the top right of the new version installed, opening his shows "Download" continuously and does not allow me to go no more like it is stuck. I tried each fund repairs suggested two days and still not able to locate the problem. Any help out there? Thank you.

  Hey Mac,

  To come back and let us know that the information helped thanks.

  As mentioned in the previous post to solve any money related question, you can post your request in support of money Forums.

  Microsoft Money Forum

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.