Location requirements NX5K FC port after the installation of the expansion module?

Similar Questions

• serial port after the installed DSC module problem

  Hello..

  I want to GSM(with labVIEW) and PLC interface, My PLC will work in serial port only.

  In my PC, I have 3 serial ports. before installing the DSC module in my system, I can configure the ports series all the... but, when I finished installation of the DSC module, 2 ports is not between these 3 serial ports. Before PRECAUTIONS, I can work with PLC and I can use other ports. After installation, I can't configure the serial ports... Hereby, I have attached the error with this...  Please help me soon...

  The Solution is, no need to install the VISA device drivers separately. Installing the DSC module only.

• cannot detect usb 3.0 on Pavilion 15-N253TX ports after the downgrade from Windows 7 Pro

  Due to compatibility problems with other software, I had upgrade to Windows 7 Pro and have now detected problems the 2 usb 3.0 ports on the left side. Have the power, but can't see all the connected devices.

  Have you tried

  Intel USB 3.0 controller driver host.

  Fresco logic USB 3.0 Host Controller Driver ,

  Renesas Electronics USB 3.0 Host Controller Driver,

  NEC Electronics USB 3.0 Host Controller Driver

  Still no love.

  Help, please.

  Hello

  Please try:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3%2C0&lang=eng

  Kind regards.

• Unable to connect to a Sony DV from my laptop using the firewire port after the installation of updates

  Original title: connection for Vista FireWire camcorder problem

  I used to be able to connect my Sony DV camcorder to my laptop using the FireWire on the camcorder and laptop.   Once it is connected the Movie Maker detect my camcorder and automatically transfer the video.  However, since I've updated my computer laptop July 13, 2012, my laptop does not recognize not the camcorder.  I checked my computer and your camcorder is not yet listed.  I checked the latest updates for the driver of the firewire port 1394 and is the day the device is functioning properly.  Can anyone throw any light on this.  The only thing I can think is that since the update, he may have done something for the connection.

  Hi Scarlett,

  Thanks for the post. I'm sorry to hear that the Sony DV camcorder is not detected.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. What is the model number of the Sony DV camcorder?
  2. you receive an error code or message?

  3 update do you have installed?

  See the Windows updates are installed:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Please follow the methods and mark the question below:

  Method 1:

  First of all, let us check the status of the FireWire port in Manager devices to do this, follow the steps below:

  Check the status of the port in FireWire devices Manager

  a. Click Start, in the search box type Device Manager and press to enter.
  b. If you don't see the FireWire controller (probably listed under "IEEE 1394 Bus host controllers") in the list, then it is not correctly installed.
  c. If you see a yellow exclamation point, then you must install the drivers, who are usually on a CD that comes with the FireWire card with the camcorder.

  Method 2:

  Step 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Step 2:

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack in Windows Vista:

  http://support.Microsoft.com/kb/948187

  Method 3:

  Connecting i.Link® (IEEE 1394) of the camcorder is not recognized by the computer.

  http://www.KB.Sony.com/selfservice/viewContent.do?externalId=C86798&sliceId=1&MDL

  For more information, see the link below:

  Import analog video to your computer by using a DV camera:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Import video from a videotape:
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Cannot run the file: code 740, the requested operation requires a rise. After the rebellion of sniper elite v2 installation

  CreateProcess failed; code 740. The requested operation requires a rise. This game is SNIPER ELITE REBELLION V2
  Please help me if you can, I want to play this game, please help me, are any developer here?

  CreateProcess failed; code 740. The requested operation requires a rise.

  Elevation means that run the application in administrator mode. Make a right click on the application shortcut icon-> click on run as administrator. If UAC prompts, click Yes.
  If the problem persists, contact the support of rebellion here:
  http://www.rebellion.co.uk/contact/

• cDAQ material requires a supply reset after the release of VI.

  My LabVIEW program seems very simple. It uses two Express VI, an analog input (NI9219) and the entry of a meter (NI9411). The program works fine until I have stop. Then it will not start again unless the chassis cDAQ (NI9472?) is the power to bike. The program only is there and does nothing. When I reset the chassis and click the button run the program starts and works perfectly. The only part of the program, which is a little unusual, is that the entrance of counter refers to the sample in analog input (AI/SampleClock?) clock for synchronization.  Sample timing mode is 'continuous' for both modules. Why reset chassis doing all it works correctly? How can I eliminate this step?

  Try your JUDGMENT of wiring in the DAQ Assistant as well.  Tasks are implemented for continuous samples and are never actually loaded to stop.  I wonder if somehow that causes a buffer overflow error or something like that and is the cause of lock USB communication.  I would say it should not, but it would be interesting to try.

• Add/Remove Programs does not locate all my programs installed after the replacement of hard disk

  I recently had to replace the hard drive of my laptop.  We have cloned the original on the new hard drive.  The programs are all visible in Windows Explorer in the directory program files.  However, they are in the utility "Add/Remove Programs".  I can't open the program in exe files.  I am told by the manufacturer of software, in one case, I need to uninstall the program and reinstall it.  I can't uninstall it without the Add/Remove utility (or can I?)  Thanks for your comments

  Try to reinstall the program without uninstalling. Boulder computer Maven
  Most Microsoft Valuable Professional

• Before and after the problem - Module Development - Windows 7, 64-bit - Lightroom CC v. 2015.5 - camera raw 9.5

  I use Windows 7 64-bit, Lightroom CC 2015.5 Camera Raw 9.5 and the module development on a feature photo ' before and after ' does not work.

  He shows me the image changed, but not the original (I don't know exactly what another image "edited", it shows me).

  In the screen shot, you can see the pictures "before and after" and the one original overxposed.

  I hope I am clear enough.

  Any suggestion?

  

  Thank you :-)

  Click with the RIGHT button ON the import step in HISTORY (do click NOT just what this will change your photo AFTER) and select "copy history step settings to before.

  "

• Module CVI written TestStand property, property value resets after the step execution.

  Hello

  I did a lot of research and find nothing relevant to the question that I have. I've created a DLL in CVI containing several functions I call TestStand. I also created a type of step customized for each function call. Every function in the DLL has a runtime version and a version edit-time. Time edition features each have a UI associated with them are called from teststand. Change these functions are placed in the custom under the heading "change" step step-type tab Before executing a sequence with these custom steps the edit-time user interface is launched to allow the user to input values that will be passed to the run function. originally, I tried to set up my functions as a 'post step' step in the step properties. However, the sequences would fail to run because the parameters of the step module was empty. Then, I selected CVI as the adapter in the step properties and specified a default module for each type. This filled the tab module settings step like I wanted. However, when I ran the sequence each function execution of measures was called twice, once for the stage of the post, and once for what was in the tab module I suppose. I then re-entered the types of step and deleted all the steps of the post office. I thought that all the problems have been resolved at this point, however, after doing some more extensive tests I always have a bug, I was unable to get rid of that.

  The problem is that two of my step types have to write data to current TestStand to execution after they ask an external device for IT. I know that the query works because my log text that generates the DLL displays the correct values. However, the data are not get rewritten on TestStand correctly. In the enforcement functions after checking the valid data has been returned, I try to write to TestStand using: "TS_PropertySetValNumber (seqContextCVI, NULL,"ThisContext.Step.ParameterValue.NumericParameter", 0, (double) ushortint);" »

  I checked that this call generates an error and also used the TS_PropertyExists method to check that I had the correct search string. These extract so I added then another command that reads the value written to TestStand two return immediately after to write it. I printed this in my log file and found that the value is written to the property of TS. So, the problem is that TestStand is defining the property to reset after the code module is running. How to prevent this?  

  Thanks for all comments, let me know if anything specified needs.

  Josh Meyer

  Well, I came to the conclusion that my 'problem' is not really a problem. I had a bit of a basic misunderstanding of the works of TestStand (I don't actually use it, I am writing just a code which will bring an existing one of the tools of the features inside the TS).

  in any case, what I learned is that these properties are retained (so you can set up a sequence, save it, re - open and be able to run it without any reconfiguration for example), when you write to a property when installing editting/sequence. The run time values are not preserved (if connected) because they are only required to carry out. For example, if a user calls one of these functions to extract value from a controller, they probably do so because they want to check the value, it's what they expect it to be. Rather than watching the value after execution (which is what I me assuming they would do), they would set up the step after step "read value" to test the value that it returned. This value is available in 'RunState.PreviousStep.valuename' in the downloaded step step "read value".

  Hope that I did not confuse anyone a lot, I'm completely new to TestStand.

• Bought a stand-alone copy of LR in 10/2013.  Received a message that the development module is disabled.

  I upgraded from LR 4 LR5, buying an stand alone version of Lightroom 10/2014 (less than three months ago) for my PC.  According to Adobe's HELP, I downloaded a second copy of the software on a new Mac in preparation for the switching of computers and discontinued using the original version of the PC.  I had to hire a consultant to assist in the transfer of pictures due to the absence of specific instructions from Adobe on a PC to Mac transition, but in early December, the transition has been accomplished and LR (now 5.7) worked for about two weeks.  Shortly after the development module has been disabled by a message that I needed to renew my membership to reactivate the develop Module!  I've never had a membership... I bought the stand-alone version of the software and want to use it rather than the version of the subscription.

  Added to all of my problems with the transition, is that we have welcomed guests for the holidays and I couldn't show them one of my recent photos by the development being disabled module.   (My guess is that Adobe is not going to compensate me for this inconvenience!)

  AFAIK, it's nothing that I did on myself.  Adobe allows the download of two copies of the LR software I have not exceeded which, I called Adobe Help specifically to ask how to accomplish the transition from Mac PC and and told to download the LR for the Mac software.

  So, how to re-enable the module development without paying extra money for a subscription?

  But to answer your question directly, you have installed installation creative cloud of Lightroom that requires different licenses. You must uninstall, then download from the stand-alone Web site.

  Updates

• Change the ports after installation

  Hi all

  quick question...

  I tried to search for him here and online, but without success.

  I'm running an ESXi host 5.0 for a school project.

  I managed to host using vCenter Server.

  During the installation, I do not change the ports, remote access port is still set to 443.

  Now, I want to connect via vSphere client on another location via ip address: 443.

  The problem is that my ISP does not allow users to redirect the ports under 1024.

  Today is my question, is it possible to change the port number after the installation, or do I have to re - install the vCenter server and configure during installation?

  Working through webclient is not an option for me, I want to continue working in the vSphere client and for the presentation, I need to show some of the plugins I use.

  I hope someone can help.

  Thanks in advance,

  Jordy

  Jordy, I think that you will need to reinstall it - are not so difficult, and will be the best way to do it. There should be a way without having to reinstall, but this may require additional tweak and changes to the config file.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• Adobe Premiere Pro requires new mac operating system. My Adobe programs already installed would work after the installation of the new operating system?

  Hey there,

  I think to get the Premiere Pro, which requires that the new Mac operating system. But I installed the other Adobe programs such as Photoshop, Indesign etc years ago.  These work on my current operating system (= Mac OS X 10.8.5).) Anyway, now I wonder if my programs already installed Adobe might work after the installation of the new operating system.

  Any ideas what to do?

  Thank you very much.

  Yes, they will work in the new OS.

  Kind regards

  Hervé Khare

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.