Log Insight 3.3 shows several entries host consuming licenses - can I clean it?

Similar Questions

• Log Insight is hard to archive data bucket. ?

  It is a mistake that we get:

  This alert is on your installation of Log Insight xxxxx

  Log Insight is having trouble archiving bucket data. There are 8 pending buckets to archive when exactly 0 are expected. This could indicate that the archiving destination is unavailable or having performance issues. If this problem is not resolved the disk on your Log Insight installation will fill up and stop accepting data. Other unexpected issues may also occur.

  Please ensure that your NFS server is reachable, has sufficient space, has permissions properly configured, and there is sufficient end-to-end NFS throughput between the Log Insight appliance and the NFS server.

  You can track the status of pending buckets to be archived via the Advanced Statistics view in the Statistics tab of the xxxx. Look for the property "pending-archivings". Ideally pending-archivings will be empty and read as follows:

  com.vmware.loginsight.repository.BucketManager:

    ...

    pending-archivings:

      value = {}

  And the arcive test is passing OK , any ideas  ? 

  Excellent! Can you please mark this question as answered?

• With device log Insight network connectivity problem

  We manage the virtual appliance 1.0 - beta and I noticed that the virtual appliance will fall the network periodically for a short period. I had constant pings, it will and it will just stop respond for anywhere from a few seconds to several minutes. You can also see in the capture where the data is missing in the user interface of screen attached. I know that we are not the problems with our ESXi hosts or dvSwitch because there are many other virtual machines running on the same host ESXi and same VLAN and they are not network connectivity problems. Does anyone else know this?

  Sounds like a network problem. Perhaps you have a dual IP / MAC address on the network? Do you perhaps have a routing problem on the network log Insight's sitting on that?

  Can you generate a bundle of support and download the instructions here: http://kb.vmware.com/kb/100852 (no need to SR just create a file called mvanbeck)

• I have a laptop on vista home-use. When you look in Control Panel - be uninstall, should there be several entries for SQL server, or one or none?

  I have a laptop on vista home-use.  When you look in the control panel - and then to uninstall, should there be several entries for SQL server, or one or none?  Each entry seems to have a different digital denotation, but apparently I should have only one entry maximum.

  The reason that I ask is that I have had problems in the software.  I want to uninstall everything that is not supposed to be there.

  Some lines of programs listed show information... some lines are completed.

  When you click on a line that is complete, I am allowed the usuall to uninstall, options etc.

  When you click on a line that is not complete, I'm not allowed the option uninstall.

  The Compact Edition and the full SQL Server can be installed at the same time without any problems. I saw SQL Server2005 apparently installed by a manufacturer, perhaps to support some software they have grouped in. He could have an Acer.

  I do not know what cause the problem with the uninstall option is not available. Information to fill in these fields are in the registry.

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall if you want to watch.

  It could be the result of a broken uninstall or a bad registry cleaner. I'm not aware of anything that would fix this. You can try this http://support.microsoft.com/mats/Program_Install_and_Uninstall

  but you may have to reinstall programs later.

  You need two redistributable Visual C++ if you have programs that need it, which is likely. They had several updates that fits into the list programs. I have two for 2005 and six for 2008.

• Vcenter 6 - integration vRealize Log Insight user access rights

  Good afternoon.

  I'm to deploy the solution to the latest version of vRealize log Insight. In my work asked me if I could create a user account only to integrate Vcenter vRealize Log Insight that wasn't the root of vCenter. Search for documentation, I found information on this subject. Also important to remember that this account will collect newspapers of my hundreds of ESXI.

  In the image below:

  

  It is a demonstration of the integration that I made using the default account with root access to Vcenter.

  You must provide credentials user with the following privileges:

  System.View

  Host.Configuration.Advanced settings

  Firewall and Host.Configuration.Security profile

  For more information you can consult the official documentation:

  Configure vRealize Log Insight to be learned from the events, tasks and alarms of vCenter Server Instance

  Configure an ESXi host to events of the journal before to vRealize Insight journal

• Log Insight (v3.0.1) Linux Agent Install on VCSA v6?

  Documentation has information contradictory to decide or not to install the Agent of Linux Journal Insight on a version to 6U1 vCenter device.

  Within the Insight v3.0.1 journal the following statement indicates the Agent Insight of the newspaper must be installed:

  

  In the documentation of Log Insight 3.0 the following shows it takes to just install the syslog server in vCenter to transmit to the server of Log Insight.  No mention of the version of vCenter and no mention of the installation of the Agent of the Linux Journal Insight on the vCSA.

  

  So I turn to google, which only adds to the confusion...

  William Lam blog «a glimpse of native syslog support in VCSA 6.0» presents Preview setup of vCSA version 6 transfer of syslog logs and Log Insight.

  However, Steve Flanders blog ' newspaper the Agent: Linux Configurations for Common Applications " refers to the installation of the Agent of Linux Journal Insight.

  Anyone would provide clarification?  Is there a better method of practice?  If the Agent installation is the best practice that the agent provides on the native syslog in vCSA v6U1?

  Thanks in advance!

  Two books - the goal is just to get syslog to LI. The reason why LI says that you must use the agent is that vSphere content pack, and more particularly the dashboard "vCenter Server - Application" requires that the agent is stopped working. If you use syslog-ng, you will always receive the events, but this dashboard vSphere content pack will not work. I hope this helps!

• vCenter Server does not send data to vCenter Log Insight

  I second vCenter server in another site, in Insight Log connection tests but I don't see any data from it...

  ESXi hosts connected to this server vcenter report their data after you run the command configure esxi on the tank.

  Where I can watch on the vCenter box that does not ensure that its installation correctly to send the data?

  Log Insight does not change to vCenter server so there is not place to search the vCenter Server (API calls only - you could try to look at events for the instance of vCenter Server view connection / disconnection of the events in log Insight). Usually when the vCenter Server events, tasks and alarms are not observed it stresses a connection permissions problem. The user specified for vCenter Server integration - must read-only permissions that are set on the object level superior vCenter Server and have you selected the checkbox to enable the authorization to broadcast across all objects? If so, can you generate a beam of support-> page Health Administration and transfer it by the directions here: http://kb.vmware.com/kb/1008525 (not necessary for a SR, simply create a file called chasehansen)

• ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  Hi all, I had a problem when using popup to create a new table row.

  I do like in this http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html

  but when I click on insert, an error stating:

  java.lang.NullpointerExeption

  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server

  In other cases, when showing Popup, when I clicked on cancel (popup), the display of the error as above. I don't know why?

  Can someone explain to me why. Thank you

  Check your page links if the createInsert operation is present.

  Then check that the getBindings() method returns a value and not null.

  Timo

• Firefox 4 shows several message boxes with "uninstall all '. '. How can I stop this?

  Firefox 4 shows several message boxes with "uninstall all '. '. They may not be closed and they freeze Firefox. The only way to stop is to END of TASK through the Task Manager.
  OS: Vista) with all the service packs and updates as of April 21, 2011. All other browsers and applications are closed.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  In Firefox 4, you can use one of them to start in the questions to troubleshoot Firefox in Safe Mode:

  • Help > restart with disabled modules
  • Hold down the SHIFT key while double-clicking the shortcut from the desktop Firefox (Windows)

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Safari address bar showing several addresses at the same time

  Anyone else having problems with the address bar. No work to present frequently visited sites and and after visiting the sites manually or via Favorites addresses are crushed between them (showing several addresses at the same time).

  I have the same problem since this morning, after the EL CAPITAN update

• Try to uninstall build Munki 3.1, does not work and leaves several entries in the registry

  When I try to remove build Munki 3.1 a few days ago. However, direct the directory uninstallation fails generally as the Build Munki 3.1 leaves several entries in the registry of the computer. How should I do?

  * original title - how should I do? *

  Hi jacob,

  If the standard uninstall process is not working (as seems to be the case), then try to use the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html that often works when the usual process does a complete job.  I know for a fact that in advanced mode, there's a special process which deals expressly with clean up the leftovers of the program register.  Personally, I use Revo to uninstall everything that I want to uninstall (more with AV products special removal tools) because almost all normal uninstall process leaves something behind (I had to remove the remains on almost each uninstall I made using Revo) and this will keep my own system.

  If you have already uninstalled to the point that it does not appear as an option in Revo, then reinstall again and then uninstall with Revo in advanced mode and this time and that should do the trick.

  I hope this helps.

  Good luck!

• My computer shows several instances of xpsp2res.dll module in System 32.

  My computer shows several instances of xpsp2res.dll module in System 32.  I found them using Norton Systemworks process Viewer.  They look identical.  Is it a kind of duplication should I eliminate?

  I think that the Microsoft Support Engineer gives you just a bunch of things to try that neither explain the 'problem' or won't help you at all.

  Depending on your installation, you can have several copies of xpsp2res.dll on your system and you should have one in your system32 folder, in the dllcache folder and perhaps many others (I'm 27) in the folder system32 on various issues under the MUI folder and different down there.  You can't have two files with the same name in the system32 folder.

  The MUI folder means "MUI" and the file contains messages XP and icons and files contain specific language XP messages.

  If you use the built in Windows search, you'll probably find a lot.  Each of them a click right, choose Properties and look at the Version and then the language.  If you are configured for English, the one in system32 should say English and others in the various MUI files will show another language in the properties/language (German, Russian, etc.).

  You will also find that you can have dozens of file xpsp1res.dll (for Service Pack 1) and dozens of files for the Service Pack 3 xpsp3res.dll, you can even have a xpsp4res.dll file in your system32 folder (even if there is no SP4 yet).

  Depends on your installation, which we know nothing since MS Answers is no problem for any information system when a new question is asked.

  I really don't see how Microsoft Support engineer 'tips' to run Disk Cleanup or the Microsoft Safety Scanner will help you at all.  It isn't even a good guess, but it has links to the KB articles.

  If you think that your system may be compromised by malicious software, I could do this:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file.

  * Original title: to access Favorites

  If I click on Favorites and then scroll through the list of favorites, it does not show the entries in each file but suddenly close showing the list of favorites. . I use Chrome and it happened all of a sudden. It was functional this morning. All the advice to fix this will be greatly appreciated

  Have you tried the Chrome forum? https://productforums.google.com/forum/#! forum/chrome

• OptionsProvider: Options screen displays several entries for app

  Hello

  I have 2 classes in my application (say hand and ConfigProvider). The ConfigProvider implements the OptionsProvider. Start the application, the instantiatesthe ConfigProvider hand. The ConfigProvider registers with the OptionsManager.

  When I run the application several times, I see several entries for my application screen blackberry options! The strange thing is that the number of entries that added to the screen options is not proportional to the number of times that I run the application. The behavior is very random. Sometimes I just get 2 entries and then left to 2, however when I run the application.

  The documentation for the register call, I know it will only work for once.

  If someone has come across something like this before? Can anyone help me regarding this?

  Kind regards

  TEJ

  But after a device is reset, your provider instance Options will have been deleted, not in any case this is the desired behavior.  Resetting the device deletes RuntimeStore.

• I have a number of licenses for AcrobatPro, one of my users PC crashed, I need to install on a PC, replacement will be show up as several PC on a license

  I have a number of licenses for AcrobatPro, one of my users PC crashed, I need to install on a PC, replacement will be show up as several PC on a license?

  Hi davids75107426 ,

  You can do this if the users PC broke down.

  It will not be displayed on the other multiple licenses.

  Concerning

  Sarojini