Activation of CC on the computer at home and work

Similar Questions

• I changed my computer working group at the computer at home and I don't have password now to open xp. Is my death now of computer for good?

  That's about all. I bought the computer used off someone and he was placed in the mode of group, had no problem. I went there in computer mode at home after using it for years and now I can't go past the password and I don't know. I do not have a xp disk again the software and I'm just wondering if there is a way for me to never come back, or should I throw it in Lake Michigan.

  It seems that if you have fallen into the trap described in the following Microsoft KB article:

  "You can not connect after you remove the computer from the domain.
    <>http://support.Microsoft.com/kb/317049 >

  To make things worse, you have no restore media or you know the login of the user local administrator password. (Not unusual for a computer connected to the domain).  You skate on thin ice throughout uses a password cached for years and finally went through.  At the risk of denying some lucky fish in Lake Michigan a free condo, there is a way that you should be able to recover if your system restore has been activated before the crash.

  First of all, you need to start your machine from a Bootable CD.  You can create one of these for free on another computer.  You can try using Linux Livecd such as Knoppix or try to use a Windows-based rescue CD as freeware Hirens Boot CD.  Whatever way you go, start your computer from this CD.  You then use this system to locate a backup copy of your registry on your hard drive.  You should find one in the following folder:
  C:\System Volume Information\_restore {xxxxxxx...} \RPxxx\snapshot
  Where the s "xxx" refers to the random semi.  Find the directory "RPxxx" just before your blunder.  You will find then five files that constitute the register: in the folder above, they will be called: _REGISTRY_MACHINE_SAM, _REGISTRY_MACHINE_SECURITY, _REGISTRY_MACHINE_SOFTWARE, _REGISTRY_MACHINE_SYSTEM, _REGISTRY_USER_. BY DEFAULT.

  You need to COPY (important: do not MOVE) these five folders for your:
  C:\Windows\System32\Config
  Directory.  After you do this, you will find the corresponding registry files (SAM, SECURITY, SYSTEM, SOFTWARE, by default) in the same Config directory.  Just rename these files from the existing registry (for example, by adding ".bak" in their name) and then rename the files _REGISTRY_ for the files that you just rename.

  Reboot your machine, you should get back to where you were.  If you succeed, you must do two things immediately.  First, create a user local administrator privileges, so that you can yourself bail next time and, second, to make a formal "System Restore" to the last restore point before your problem.  It also wouldn't hurt to change the password for the user: "Administrator" for something, you will know now.

  A more problematic procedure of Microsoft essentially describes the following steps.  If you follow the instructions in Microsoft, boot from the CD to start above and repeat the procedure in part 2, step 6, using GUI to move/rename the files instead of the command prompt.

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  ... and if all else fails, just install Linux on the machine ;-)...
  or you can also check to see if you have a recovery partition, which you can use to reinstall Windows.  Find a key, press the first splash screen when you start.

  Good luck
  JW

• I get windows32 error when I install a game (cd) into the computer. CD worked on the computer at home ' and last labtop. Help, please!

  install cd games I bought online
  windows32 error

  Hi installin games,.

  Welcome to Microsoft answers forums!

  (a) what is the exact error message that you receive?

  (b) what is the type of your operating system (32-bit \64bit) system?

  I suggest you try the following steps:

  Step 1: Use the Windows Installer Cleanup utility

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  290301 (http://support.microsoft.com/kb/290301/) Description of the Windows Install Cleanup

  Step 2: Download and install the latest Windows Installer 4.5

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 3: The clean boot computer and try to install the game.

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Perform a clean boot (see step 1 in the link); If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Step 4: Try to run the program in compatibility mode.

  To run the troubleshooting program compatibility Troubleshooter

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, please consult the manufacturer of the program.

  Note:

  1 make sure that the CD is not bad, scratches or stains on the CD

  2. you cannot run 64-bit on a 32-bit system applications

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• log on the computer at home

  I bought the creative cloud on work computer, how to connect on the computer at home. I installed it, but it is still saying 30 day free trial.

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• I'm telling my legal copy of Indesign CS adobe @, but tells me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under the terms of the license, I could put on my laptop and keep

  I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?

  It won't matter because your copy of CS2 and serial number no longer works.  You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period.  The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Installation problem in the second installation on the computer at home?

  I have full CC membership on my lap top desk, I registered on my computer at home and installed ony 30 days versions.

  My firewall Windows 7.0 Microsoft 64-bit seems to have stopped all Adobe products work as when I try to open the app asks to connect you as they sit there unable to connect.

  How to install second announced working properly?

  How to CC Abobe to connect to work if Windows security if he stops to connect?

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Mylenium

• Why does my itouch not charge or be recognized by the computer at home

  My iPod touch has not been used for a few weeks and does not load now and when I plug it into the computer at home (Mac) he is not grateful it. The charge lead is fine when connected to another device.

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer unless the other device that connects has a lower version of iOS

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I use the desktop at home and want to use Apple laptop on the go.  What should I do?

  I use the desktop at home and want to use Apple laptop on the go.  What should I do to be able to use both platforms when my account is for victory. ?  I think the conversion of my computer at home from Apple as well in the near future.  Thank you

  Post edited by: m48more

  m48more wrote:

  What should I do to be able to use both platforms when my account is for victory. ?

  Cloud accounts are cross-platform.

  You have a maximum of two activations, but you can use them on Win/Win or Mac/Mac or Win/Mac. The choice is yours.

• I bought Windows XP to my computer at home and I am having to reload XP but I can't find my license key.

  I bought Windows XP to my computer at home and I am having to reload XP but I can't find my license key. Is there a way to get it renounces to buy another copy?

  original title: license key

  Saturday, July 31, 2010 19:23:36 + 0000, jajovik wrote:

  I bought Windows XP to my computer at home and I am having to reload XP

  Why? It is very rarely necessary and is often a bad thing to do. What
  you get problems? There is often much better than solutions
  Reinstall Windows from scratch.

  but I can't find my license key. Is there a way to get it renounces to buy another copy?

  You can find the product key with any of them:

  ProduKey http://nirsoft.net/utils/product_cd_key_viewer.html

  AIDA32 http://www.aumha.org/freeware.htm

  Everest http://www.lavalys.com/index.php?page=product&view=1

  Magic Jellybean www.magicaljellybean.com/keyfinder.shtml

  Belarc Advisor www.belarc.com/free_download.html

  Ken Blake

• I have two monitors, I need remote desktop for my computer at home and be able to see two screens on my home computer, how do I do this?

  I have a laptop with a single monitor.

  I need remote desktop for my computer at home and be able to see two screens on my computer at home.

  How do I do that?

  Original title: dual monitor question

  If you look at 'Options' remote desktop and look at the "View" tab there is a checkbox for "use all of my monitors for the remote session.  You may need to be an administrator to set this option.

  Check out these similar posts too.

  http://www.Google.com.au/search?q=remote+desktop+dual+monitor&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = WgtJUKLeH6mRiQe834DoAw

• X 1163 projector shows smaller than the computer screen image and creates the horizontal scroll bar

  I just bought an Acer X 1163 projector for use in presentations. I like the brightness, size and features. I am disappointed to make a PowerPoint slideshow, you need to buy another remote, but it is an easy fix.

  Here's what's really about me!

  When I pull a Web site or other things on my laptop for the presentation, it has a horizontal scroll bar and does not fit it on the screen. I tried different settings and who are seeking an answer online, but can't find what I can do to get the image to display without a horizontal scroll bar.

  I'm almost beginning to panic that I bought this for a large presentation I have to give next week. I hope it's one of those stupid questions with an easy answer.

  Thanks in advance for your help.

  My techy boyfriend just called. Here is the solution. (It kills me when someone has a question asked and more later said: "never mind, I figured it" and never says how do to the next person to come.)

  The question seems to be in the computer resolution setting and how it automatically resets when plugging n the projector. To resolve this problem (at least in windows 7) follow these steps:

  Right click on the desktop

  Click on display

  Click on change display settings

  Select the 1366 x 768 resolution

  It shows exactly what I'm looking for now on my computer.

  Thank you for having a forum to ask in all cases

• As the computer is old and slow it is better to increase the RAM or better to invest in a new computer update?

  original title: lack of RAM

  McAfee, unable to update as the only security base 256 and 512 MB of RAM required. As the computer is old and slow it is better to increase the RAM or better to invest in a new computer update. Would appreciate help in this case. Also as I'm pretty computer illiterate, please use the terms that I can follow. Thank you

  Hi Kathleen Almeida,.

  Because the computer is old, instead of upgrading the ram, you can buy new computer. I suggest you contact system manufacturer more about if you need to upgrade or buy a new computer.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler.

  When I am working on my desktop HP, the computer freezes. Nothing works (keyboard or mouse). The screen becomes sometimes paler. And the only way to resolve the pbobleme temporarily to stop temporarily the computer weighing on the button of the tower.

  Hi Louis,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  • When windows update (KB968930) power Shell2.0 and WinRm20 for win Vista tries to install the thugs of the computer then restarts and crashes again and again

  Hello LisaQuaranto,

  I suggest that you configure the computer to start in minimum mode, download the update from the Download Center and try to install the update.

  To perform a clean boot on a computer that is running Windows Vista:

  a. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  b. on the general tab, click Selective startup.

  c. under Selective startup, clear the check box load startup items.

  d. click OK.

  e. When prompted, click on restart.

  f. after the computer starts, check if the problem is resolved.

  If your problem is resolved after the clean boot, and then follow the steps in the following article to narrow down the exact source:

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode by following the steps under "Reset the computer to start as usual", after performing the clean boot troubleshooting.

  You can download the update following the link below:

  http://support.Microsoft.com/kb/968930

  Thank you
  Irfan H, Engineer Support Microsoft Answers