User Interface failure

Similar Questions

• User interface failure after MS windows update

  Just downloaded a new MS update 12/01/2011. He propted me to reboot, so I did and it seemed to be boot normally, but as soon as she was about to the login screen it came with an error message.

  "The application or DLL C:\Windows\system32\ODBC32.dll is not a valid windows image. Please check against your installation diskette. »

  With my only option is to click ok and get stuck in the same loop: "reboot, the error message, click ok, restart again at the beginning."

  I have a Linksys wireless device I've been using since I first got the computer 6 years ago and never had a problem before with it go to this special login screen instead of the usual login screen for Windows XP Professional.

  When I try to boot into 'safe mode', the same message appears, but if I close the message instead of click ok, another message appears: "the GT Gina.dll failed to load user interface dll. Please contact your adminastrator system (I'm admin) to replace the dll or the original dll... »

  Can someone help me with this problem, what can I do? I have inportant information on my 'C' drive then a complete reinstall of my OS is not an option, and I dare to talk about the irony that I was going to make a backup of that same information today, as I do once or twice a month.

  PLEASE HELP ME, SOMEONE, HELP!

  Since most of the people do not have a genuine XP bootable installation CD, think they might have a genuine XP bootable installation CD, not sure what type of CD that they have, or have only recovery type CD that came with their system.  To remove all doubt, I have instructions to make a CD bootable Recovery Console.

  If you have a SATA drive, sometimes the CD Recovery Console will not recognize your hard drive without some settings in the BIOS, but I would start with the bootable XP Recovery Console CD do you and see how it goes.  With SATA drives, sometimes it's beautiful, it is sometimes annoying.

  I also have in the next post will give you the instructions to create a bootable Hiren CD.  There a windowsy Office look and feel which is less intimidating than the Recovery Console command line interface.  Hiren does not seem that this issue be SATA (at least not for me) and you can always make your file replacement.

  I recommend yo do the CD and try them in a system that works just to see if they start very well, you know.  You do not have to 'do' anything, make sure that it starts, and you can navigate and see some files, then exit.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Failure of XP Mode User Interface

  After update mode XP de Windows 7, update to reboot hung on logout. Now, it gives message on restart XP Mode User Interface failure.

  The message reads as follows:
  «You cannot start a remote desktop connection because the Windows login on the remote computer software has been replaced by the software incompatible msgina.dll.»

  To correct this problem, please ask the administrator of the remote computer contact the program vendor for a version that is compatible with Windows. »

  XP mode does not start safe mode. Message "cannot start Windows Virtual PC Host Process. Check the log of the events system for more details. Server execution failed. »
  The event log showed that the normal start of the items for XP Mode.

  Additional notes about XP Mode start in Normal operation:
  1 icon starts Windows XP Mode.vmc
  2. from the virtual computer dialog box is displayed.
  3. the User Interface dialog appears.
  4. hibernation dialog box appears and closes after completion.

  I also tried a system restore, but that did not help.

  Hi James,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

• Failure of logon user interface after windows update

  After a recent windows update I get the following error.

  Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

  After this window I get:

  User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

  The only option at this point is to restart that puts me in a vicious circle of the same mistake.

  I tried to login in safe mode by following the instructions in this article , but the same error messages.

  I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

  Someone at - he had this problem and found a fix?

  Thank you!

  You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

  KB.VMware.com/kb/1013846

• Display success or failure of the images only in the user interface custom

  I built a user interface customized to my project VBAI 2010 that displays 2 images from 2 different cameras.  I want to have the "View menu" available for an operator to choose between images, only passed, only having failed, etc.  The view menu is using the default user interface, but when I build a custom one from one of the templates, this option is no longer available.  How can I get the view menu to show up?  If I can't do it, is there a good work around for this?

  This is the VI amended with an additional option for any display puts is not up to date.

  If you do advanced UIS Custom like this, you should definitely check out LabVIEW. You can even install it for evaluation to try... later, when you're not on the customer site

  Hope this helps,

  Brad

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.

  

• Simple TestStand in LabVIEW user interface

  Hello community,

  I design a user interface for Teststand using the simple example of vi. The name of the file is VI.vi of first level

  I am trying to understand works vi inorder to make changes and ran into a few questions that I was hoping someone could answer for me please.

  To begin, I add my file sequence and click on 'Test DUT'. Then a dialog box appears asking to enter the serial number of the UUT, where and what are the causes that to happen in the code? After I entered my serial number it turns my code sequence and at the end an another message specifying in a green or red if the UUT success or failure. Where and what are the causes of success/failure boxes happen in the code?

  Thank you

  Kevin

  If you had posted this on the forum of TestStand, you would be probably got some of the answers better.

  But in the meantime, you need to open the SequentialModel.seq (or what is process model you use) and navigate to the entry Point of execution sequence, you use.  In this case, click Test UUT, the icon in the list of sequence and track the flow of test.

  With respect to the banner that appears after execution of USE test.  The banner is implemented as a DLL in the PostUUT callback.  It is based on the status of the MainSequence callback result.  It is the result of the test that you started by test DUT.

  The best advice I can give you is to go through the sequence of process template file and learn that it is not an easy task, but worth the effort.

  Thank you

  PH

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• How close/hide dashboard appearance "pinned" in the custom user interface

  There is a dashboard in the custom user interface that is not a small "x" in the upper right tab that would be closed/hidden. Is anyway, in the interface user or cmdline that let me close/hide this dashboard? Screenshot attached. 5.8.2 running

  
  

  Never mind. A dashboard that would not close was marked as "default" dashboard. If you want to close a dashboard that is marked as 'failure', a different dashboard by default and it then you can close the dashboard that you couldn't close before.

• How to change the user interface of the entity object indicators / Validation msg when running?

  Hello

  I use JDeveloper with version 11.1.1.6.3. Given my requirment details below.

  Suppose I have a (say 'EMPLOYEE_RATING') table in DB with the following structure.

  Columns:

  1 EmployeeId (Employee Id)

  2 RatingType (values can be in Stock or Bonus)

  3 RatingLevel (values can be 1, 2, and 3)

  Constraint:

  EmployeeId, RatingType and RatingLevel all together must be unique.

  Requirement:

  The customer's requirement is to have two screens of rating (one for Bonus another stock) and display different user interface boards and validations as follows.

  1 RatingType is a hidden field, are defined with the default (Bonus or Stock) based on the screen that the user opens.

  1. for the Stock screen, RatingLevel label should be "Stock note.

  2. for the Bonus screen, the label should be 'Bonus Rating'.

  3. for validation, the message must be 'Bonus note level must be unique' or 'Level of Stock of notes must be unique' ADB on the user screen opens.

  Implementation:

  I have a def EO (for example "RatingEO") and VO (for example ' RatingVO') def. Tips UI (Label) are given at the level of the OS. Also the unique constraint validation is made to EO with the message ' {0} and {1} must be unique, where {0} is source.hints.EmployeeId.label "and {1} is source.hints.RatingLevel.label.  I also did the shuttle two different instances of the VO (EmployeeRatingBonusVO and EmployeeRatingStockVO) in the request form (although BonusTaskFlow and StockTaskFlow are set to open with the new transaction, Intension of the two shuttle different named instances is to have the common code in VO. impl class but can run different business logic code by checking the name of the instance of VO)

  Question:

  Since I have two different pages, I can define two different labels in the jsff, but I can't change the commit message defined at the level of object entity based on open display. At the opening of the screen, depending on the type of screen, I should be able to change the label specified at the level of the entity object. (It should not affect the definition but only the instance). As this entity object cannot be distinguished (if it belongs to Bonus or Stock), I have problem on how to change the indicators of UI during execution.

  Any help on this would be appreciated! Thank you.

  Rami

  Post edited by: rami

  I tried your script.

  I created the secondary key with EmployId and rating level. I added validation of Unique key. In failure handling handling section of the validator, I gave the error message like: {0} must be unique. For token 0: I gave RatingType (here RatingType is the name of the attribute in OT).

  We give the default for RatingType as Stock Bonus in VO. kind RatingType get its value or Stock Bonus based on the original Version that we use.

  I hope this helps.

• How do I switch back to the previous user interface style

  Is it possible to restore the v31 pre user interface style? Why the user interface has been changed in the first place? The user interface was the area with the least amount of questions, especially when it comes to style and colors. I'd rather see Mozilla devs allowing multiple clients sharing the same locally stored in structure of the mailbox that waste their time on evolving user interface.
  So, is it possible to get back to how it looked like before rather than having everything be gray and dark blue battleship? It's especially annoying when creating new emails. The header section is all gray offering much less contrast and with weak lines, there is barely any spacing between header lines. It is totally against what produced the 30 years of UX research.
  A cure for this?

  Themes of the addon:

  • https://addons.Mozilla.org/en-us/Thunderbird/themes/

  If you really want o back to the 24.6.0 version:

  • FTP://FTP.Mozilla.org/pub/mozilla.org/Thunderbird/releases/24.6.0/
  • Choose win32 if Windows OS
  • Choose the language: for example: English British GB
  • Click on the .exe file to download

• How to return to the classic user interface?

  I used the UI classic (this VERY old interface) with Firefox 28.0a1 nightly. My last update was November 10, 2013. Then I updated my nightly today and all of a sudden, after the reboot, my UI changed for the worse. Surely enough, it didn't look like the default, look-alike of Google Chrome, but it's just as bad. So my question is, how do I change it back to this old classic user interface? If possible, don't tell me modules, please... Thank you...

  Mozilla said that it was necessary to create a user interface that is the same for mobile versions and Firefox desktop.
  
  No, but it can be changed with the Classic theme restaurateur extension and selected pieces of userChrome.css or stylish user styles.

• FF22 parameters adjusted to resize the large icons - but the text user interface - (bookmarks, etc.)-is too small to read... How to enlarge text in user interface only?

  I adjusted the FF22 settings to resize the icons large - but the text of the UI - (bookmarks, history, etc.)-is too small to read... How to enlarge text in user interface without enlarging the text of the page Web - or re - expand FF22 icons?

  Have you tried the extension?

  • https://addons.Mozilla.org/firefox/addon/theme-font-size-changer/

• downloaded v.21, but do not get new user interface

  I downloaded the latest version several times. I want the new UI, but my browser will not convert to the new user interface. I don't know if there is an option somewhere is going to fix this problem, or what is happening. Any help would be appreciated.

  You get the orange Firefox menu button when the menu bar is hidden.

  • Firefox menu button > Options
  • View > toolbars (press F10 to display the menu bar)
  • Right click on empty toolbar space

  See:

  • https://support.Mozilla.org/KB/how-do-i-get-Firefox-button
  • https://support.Mozilla.org/KB/menu+bar+is+missing

• Web pages and user interface display too small in Firefox 20.0.1 (but fine in IE and Chrome) - how can I fix?

  On my Dell Inspiron 7720, running Windows 8 64-bit, Chrome and IE display web pages in their correct format immediately after their installation, but Firefox 20.0.1 displays too little (and the user interface of FF is too small as well).

  I went on all kinds of things, it might be and know I can install an add-on to enlarge pages at least, but I really want to get FF displaying correctly of course.

  I use my native resolution 1920 x 1080 - laptop and have to display Windows set up for display at 150% - % of Windows display development does not affect display FF.

  Can someone tell me please how to get FF displaying correctly (without an add-on.)

  Help appreciated,
  US5

  Thanks for your help cor - el.

  I just installed NoSquint and it works perfectly for the web; pages. Then, I found a theme with bigger icons in "complete themes" - there are a number of them.

  Guess I expected to understand why only FF was smaller, (not just solve the problem) - However, the setting is very nice-thanks!