Logic does not get

Similar Questions

• LOGIC does not

  logic does not not and continues to coreMIDI.Framework bounce in my dock, nobody knows about it?

  What version of LPX?

  What version of Mac OS X?

  What Mac model, size of the disk, free space on the disk, amount of RAM?

• burner does not get recognized

  The computer is HP pavilion 7955, XP home edition.

  There are two features of optical disc.

  The first is a HP cd-writer. This device does not get recognized and does not appear in my computer screen. When the button open the tray, there is no green light or the drawer opens.

  The second is a DVD-ROM HITACHI GD - 8000. This device is recognized and appears in my computer screen.

  A floppy drive A appears on the screen of my computer, although there is no floppy drive.

  Hello

  · The CD burner has been recognized before?

  · Do you remember any changes made on the computer?

  You can follow the steps in the link below and check if this can help: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

• Google chrome does not get updates

  my google chrome is not updating.after some time it says error3 and I don't know how to solve this problem, as EMI does not get the updates ive tried going by default on my settings for no result .hope could someone help me with this.

  Thank you stephanie, but in the meantime idid a system restore to see if I could fix it but now im, e get updates are disabled by the administrater ime so no further forward.

• SA520W does not get an IP on the WAN option

  We use a SA520W as our main router and have a fiber attached to the interface default WAN connection. We would like to improve our availability using a secondary internet connection on the WAN interface option.

  We bought a router dovado tiny 4g for this another connection. It acts as a dhcp server, but the Cisco router does not get an IP address from the dovado router. The router works as expected when it is connected to a normal computer. But somehow the cisco router does not get an IP address.

  I also tried to put a static IP address for the Cisco router, but that did not help either. The dovado router is setup deliver ip in the range of 192.168.0.2 - 254

  Link is established, but State wide AREA network is down. Any ideas?

  

  Christian,

  Make sure that the port option is set to WAN and WAN mode = MODE of LOAD BALANCE. If not pull an ip address or to negotiate a connection.

  Jasbryan

• I have someone using PSCS4, and when she creates a pattern fill layer, it does not get a mask.

  I have someone using PSCS4, and when she creates a pattern fill layer, it does not get a mask.

  Any ideas on how it could have turned off and how we can re-enable default?

  I check its settings panel menu and "Add default mask" is checked.

  Thank you!

  She changed the Layer palette settings to not automatically create a mask with layers of filling.

  Is not an adjustment layer, so the adjustment layer setting does not apply (and two parameters should really be in the layers palette in order to reduce the confusion).

• Query does not get scanned with Explain plan index

  Hello
  I have a table with Index XXQP_SAMPLE_N1 in PROCESS_FLAG column. When I run the query below and see the plan to explain it, this table is to get access full table (with red color in Toad). It's not scan with the index. I also analyzed the table with command below. can anyone tell why he does not get scanned with index?
  
  exec DBMS_STATS.gather_table_stats ('XXQP', 'XXQP_SAMPLE', estimate_percent = > 30, cascade = > true);
  
  SELECT
  *
  Of
  XXQP_SAMPLE
  WHERE
  process_flag = 1;
  
  Thank you

  the number of records in the table to satisfy the condition process_flag = 1

  I wrote a little note on this topic. Reade case 1. It may be of your interest.

  http://karthickarp.blogspot.com/2008/12/it-is-often-asked-why-SQL-is-going-for.html

  Published by: Karthick_Arp on April 15, 2009 01:41

• Printer HP B209a does not get the IP address of my router

  Computer is a HP G71 running under Windows 7 64-bit

  Router is a NETGEAR's WNR3500L with the latest firmware and a unique SSID

  Using the latest version of the software install HP B209a

  Towards the end of the installation for the wireless feature, the installation stops and tells me that my PC is on a network other than my printer.  All wireless devices connected to my router have 10.0.0 # IP addresses.  Through many installs the printers IP address is constantly as 192.168.0.109.  The summary on the printer wireless shows my unique routers SSID but when I open my router software and devices attached, the printer is not listed.  My router is attached to a simple DSL modem with no wireless features.  I tried the following hotfixes recommended in these forums.

  1. Connect the printer to the router through WPS with push button.  Connection is returned as a success, but identified printer router SSID as grabbled alphanumeric characters and not an IP address.  Router does not show the printer in the devices.  During the printing installation software PC and printer fail to communicate when the USB cable is connected.
  2. Connect the printer to the router through WPS with PIN.  Connection is returned as a success, but all the information in the router has been changed and all other wireless devices disconnected.  Connection to the router has shown the SSID THAT became grabbled of alphanumeric characters and the security key was changed.  No wireless device was attached to the router, but the wired connections remain intact.  Fixed key SSID and security.  All other wireless devices back in place, printer does not have.
  3. Ping network devices.  Ping 10.0.0.1 to 7 came back as successful.  192.168.1.109 ping failed.
  4. IP address of the printer has entered into a browser address bar.  Returns a Google search page, but not for access to the network printer.  Address of more than one entry address bar and couldn't connect to 10.0.0.1 (router) and 192.168.0.1 (DSL modem)
  5. Unplug the DSL modem router.  All wireless devices to connect to the router but do not have access to the internet.  During the installation of the printer software, when you are prompted to connect the USB to the PC, printer and PC fail to communicate.
  6. Turned off the Windows Firewall, both public and private without success
  7. Used the Hp network diagnostic utility and it does not can find printer.

  I have installed and uninstalled the software several times.  The printer has always identified my identifier SSID is correct and the network key.  But during the finalization of installation I get the message and cannot connect PC printer because they are on different networks.  I have no idea where the printer receives the IP address.  It should be an address from the router, but it is not.  IP address of the modem DSL IS in the format # 192.168.0, but given that the modem is the base model with the wireless or network capabilities, the printer cannot logically connect to it.  I tried to unplug the router and the printer several times without success.  The possibility of changing the IP of the printer through the browser is not possible for the reasons given in 4.  What are the other options to change the IP address of the printer?  If I can assign an address # 10.0.0, I think it will solve my problems.

  Is your DSL modem is a modem/router combo (most are)?  If so, it probably has a structure of 192.168.0.X and is probably a wired router (only).

  This DSL modem/router is attached to the WAN, or one of the LAN ports on the back of the Netgear?  Try to move to the other type of port, and then restart both routers.

  On the front of the printer, click the settings 'Restore defaults' and wireless the wireless radio.

  Finally, the Netgear settings, here are some tips:

  1 make sure that DHCP is active, the SSID is not hidden and that MAC filtering is not enabled.

  2. ensure that the 802.11 g mode (as well as other modes is very well).

  3. use WPA or WPA encryption, not WEP (it is not secure and may cause connection problems)

  4 change the channel of the Netgear to 11 (Yes, I know it makes no sense, but it works).

• When the perforation in the logic does not record pre

  Using logic 10.2.4

  I have implemented punch and punch the locators.  I play with the track and making punch.  Logic doesn't store any roll before... .in other words if I try to expand the newly created region a little more early to catch a truck or something thing I got at the beginning, nothing is there.  I know logic is supposed to check in at the beginning just in case... there at - it a setting I'm missing? I tried the pre roll record and set at 6 seconds, but still nothing at start is saved before punch to the point.  Same thing in lieu or in creating records of decision-making.

  

  The count and record Pre Roll above are mutually exclusive. They do not define how at the beginning of the recording begins, but rather where the playhead is set before the start of the recording. If you have a 2 count together bar and position the playhead at 10 bar, and then tap Save. Logic moves the playhead at bar 8, start playback (if there is something to play) and begin to check in at 10 bar. If you select a period of prefetching in a few seconds, the playhead will jump back 6 seconds instead of bars. Neither defines the amount of pre-roll advertising in the in the recorded real audio.

  Auto Punch in is exactly that. When the recording start / stop. There is no registered pre-roll advertising. If you want the extra recording time before or after, then stretch the autopunch bar to make room for the start of start or end at the end.

  You can also use take folders that might be a suitable replacement and allowing campers of any part you want.

  Exception to this rule the there is one and will achieve exactly what you want - but it does not work with automatic punch. It is the punch on the fly...

  prerequisites - you must have "quick fist blow" activated.

  Press play and internally logical starts recording the moment where you press play, when you're ready to punch in, press R and you start recording, when finished, press stop. Logic recorded a region between the points where you started recording and click on stop. However, logic actually starts recording (under the hood) from the moment where you supported the play button, so if you look in the project tree, you can see the entire audio region with only set it collecting points as the region.

  It's only this case that allows you to develop the region in time to include a part any audio region that was "pre" set registration points. It is in fact will contain the entire audio file as soon as the room was pressed to stop, even with quick punch point defined further in the song.

  So say you have 10 bars - you start reading at the bar 1 and 5 bar you quick punch in bar 7 and you punch out. The defined region will show 5-7 bars, however if you develop the starting point of audio regions to the left - you will find that you have saved in fact all the way back to bar 1.

  Sorry, this feature is not available if the autopunch is the method of choice.

• Entry of side chain in 10.2.1 logic does not

  Just updated to 10.2.1 and the entrance of side chain on that ins plug does not open in the menu dropdown. Also the "view 100%" button just below the Chin of the side no longer works... I'm on a 2013 10.9.5 OSX mac book pro

  (1) make sure that you have enabled ANY advanced logic tools in Logic preferences...

  (2) make sure that you work with a stereo audio track...

• Data does not get dirty

  Hi all

  I use Jdev 12.2.1.

  I've created a popup to legend when any other workflow is selected in the menu. And this popup prompts only when changes have been made in the page. This popup is for backup and restoreactions. When the user clicks YES, the data will be saved and when clicked on ANY Restore action doesn't get made.

  All these features are perfect work.

  The problem I am facing is that when I simply enter some data in any of the components such as the table and the form, the data don't get dirty until and unless I click on one of the buttons on my page.

  An action must be made for the data to get dirty as clicking on any one of the button.

  If simply data are entered and an another taskflow is selected, then data will not get dirty which causes the popup to does not display.

  Gives auto submit to help components, but giving auto will present to each field is not possible and is not a good approach.

  I'm using the code that allows to completely when data is dirty, below

  if (JSFUtils.pendingChangesExists () == true)

  {

  _logger.info ("call popup");

  JSFUtils.showPopUp (getSaveChangesPopup ());

  }

  I know setTransactionModified() method will help. Using this method will call the popup every time. But I want only this popup when a change is made.

  Is it possible for the data entered to get dirty without clicking on any button. ???

  Please help me.

  Thank you.

  ANU

  Hello

  Finally found the solution. Data was not dirty because I used a subform to surround the main provision used in my page. Remove or by setting the property to "default" true will solve the problem.

  Thank you guys.

• Reports of browser does not get generated in PT - 8.54.11 customer only

  Team,

  Installed PT - 8.54.11 customer only on win 7 64 bit and it works fine. But when we try to create browser reports, generated IE .rpt reports get not get come very well and not the HTML of reports. I made sure that the check box generate the browser report is checked. Is this a known problem with PT - customer 8.54.11.

  Thank you!

  Please see the following document. You may need to copy UPGCOMPVIEWER of PeopleTools FULL installation PSHOME\setup folder in the CLIENT-only install directory.

  E-INST: browser compare reports does not not so used ClientOnly install (Doc ID 1669696.1)

• Someone else to the DPC does not get their free images of 10 per month?

  I got a dollar photo club membership before Adobe Stock took over, and at that time, I received an offer for a one year subscription to Adobe for $9.99, which would include 10 photos per month and 99 cents per download additional.

  I bought this offer and for the last three months, I have received no free downloads per month. I was chatting to adobe via instant messaging, and they say that the CPD plan does not come with 10 free images per month, when in fact the email said he made and the plan is named literally "Adobe Stock - 10 images per month for members of the CPD (one year)". " "

  Anyone else having this problem with Adobe? If so, how to solve it? I spent countless hours trying to get what I paid for, and every time I talk to the 'customer service' chat, they tell me that they have to move the higher ticket and someone will get in touch.  Nobody ever does.

  Hello

  Problem has been resolved and the allocations of may, June & July have been added to your account - 30 credits.

  I added a 16 additional credits instead of the images you have purchased during the distribution of your subscription was not available.

  Kind regards

  Bev

• Essbase error 1042012 - OTL file does not get replaced by OTN file

  Hello users,.
  
  I'm trying to change the contour of the ASO, but it is error and gives as follows. I checked the files on the disk and realized that OTN did as well as the OTL file. I deleted the OTN file and tried to do the load, but somehow the file OTL is not get replaced by the OTN file. I tried adding members manually but failed there, too. Anyone can share their experience on this topic please?
  
  
  
  
  
  
  The DEV_ASO1 database management
  App DEV_ASO loaded - connection established
  Start the application [DEV_ASO] with the process id [10664]
  [DEV_ASO1] the object is locked by the user [dubes@Active Directory for Hyperion]
  [59575033] the object is locked by the user [dubes@Active Directory for Hyperion]
  Strengthening of the elapsed time Dimensions: seconds [2,683]
  Unlocked by the user [dubes@Active Directory for Hyperion] [59575033] object
  Playback of database settings [Drxxxxxx]
  Said size Dimension = [385 19 13 68 145 449 1650 11087 4 23 6 74 60 360 3 17 12 5 95 6 17 93 24 23 10 9 8 38 10 3 2 2]
  Sizes of Dimension real = [379 19 13 66 142 449 1648 11080 3 23 5 74 60 360 3 17 12 5 95 6 17 93 24 23 10 9 8 38 10 3 2 1]
  The Member [Project_Cnt] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Non_Labor_Accts] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Project_Dur] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Budgeted_Project] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Budgeted_Project_old] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Unbudgeted_Project] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Unbudgeted_Project_Per] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Delta_BPAPF_Per] is complex. If possible, add a non-empty directive for scattered data optimization.
  [QTD] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  [CDA] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [3MoAvg] is complex. If possible, add a non-empty directive for scattered data optimization.
  [HTD] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  Error network [10054]: unable to send data
  Error network [10054]: unable to send data
  Unexpected error Essbase 1042012
  Unlocked by the user [dubes@Active Directory for Hyperion] [DEV_ASO1] object

  It's a big complaint by many customers that the compact feature does not work and you need to re-create the outline or by using the esscmdq to separate esscmd tool.
  I agree that this kind of functionality should certainly be available by default through maxl and eas now.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Index of book does not get updates

  Hi all

  I have a book of FM 10 close to 200 pages and 7 chapters. It has a nice (markers).

  Today, I discovered that the index is not get updated when I update the book. New entries do not come.

  "Generate Table of contents, lists, and indexes" is selected by updating. And it was working fine before, this problem came a lot recently. I noticed today.

  When I try to generate a new index, the generated file is empty. Although the index entries in the book are very good, FM does not detect them.

  I'd appreciate quick help much in this case.

  Kind regards

  Com

  > I imported these (all formats including the masterpages and ref pages)

  > of the old index file, and now it's all the same to the research.

  It is Plan B and is a more reliable route, but is more work that's Plan.

  > ... I'm not being able to ressuract the old index as you said...

  That's happened?