LOGIC does not

Similar Questions

• When the perforation in the logic does not record pre

  Using logic 10.2.4

  I have implemented punch and punch the locators.  I play with the track and making punch.  Logic doesn't store any roll before... .in other words if I try to expand the newly created region a little more early to catch a truck or something thing I got at the beginning, nothing is there.  I know logic is supposed to check in at the beginning just in case... there at - it a setting I'm missing? I tried the pre roll record and set at 6 seconds, but still nothing at start is saved before punch to the point.  Same thing in lieu or in creating records of decision-making.

  

  The count and record Pre Roll above are mutually exclusive. They do not define how at the beginning of the recording begins, but rather where the playhead is set before the start of the recording. If you have a 2 count together bar and position the playhead at 10 bar, and then tap Save. Logic moves the playhead at bar 8, start playback (if there is something to play) and begin to check in at 10 bar. If you select a period of prefetching in a few seconds, the playhead will jump back 6 seconds instead of bars. Neither defines the amount of pre-roll advertising in the in the recorded real audio.

  Auto Punch in is exactly that. When the recording start / stop. There is no registered pre-roll advertising. If you want the extra recording time before or after, then stretch the autopunch bar to make room for the start of start or end at the end.

  You can also use take folders that might be a suitable replacement and allowing campers of any part you want.

  Exception to this rule the there is one and will achieve exactly what you want - but it does not work with automatic punch. It is the punch on the fly...

  prerequisites - you must have "quick fist blow" activated.

  Press play and internally logical starts recording the moment where you press play, when you're ready to punch in, press R and you start recording, when finished, press stop. Logic recorded a region between the points where you started recording and click on stop. However, logic actually starts recording (under the hood) from the moment where you supported the play button, so if you look in the project tree, you can see the entire audio region with only set it collecting points as the region.

  It's only this case that allows you to develop the region in time to include a part any audio region that was "pre" set registration points. It is in fact will contain the entire audio file as soon as the room was pressed to stop, even with quick punch point defined further in the song.

  So say you have 10 bars - you start reading at the bar 1 and 5 bar you quick punch in bar 7 and you punch out. The defined region will show 5-7 bars, however if you develop the starting point of audio regions to the left - you will find that you have saved in fact all the way back to bar 1.

  Sorry, this feature is not available if the autopunch is the method of choice.

• Entry of side chain in 10.2.1 logic does not

  Just updated to 10.2.1 and the entrance of side chain on that ins plug does not open in the menu dropdown. Also the "view 100%" button just below the Chin of the side no longer works... I'm on a 2013 10.9.5 OSX mac book pro

  (1) make sure that you have enabled ANY advanced logic tools in Logic preferences...

  (2) make sure that you work with a stereo audio track...

• Logic does not get

  Hi all

  In the code below, I need to check, if the update is less than (only) the sysdate, so I have to throw an error message to the user. But this below one does not work. Please correct me if something wrong.

  DECLARE

  "UPDATE VARCHAR2 (100): = 5 JANUARY 2014;

  Vout VARCHAR2 (100);

  BEGIN

  IF pdate < TO_CHAR(sysdate,'dd/mm/yyyy') THEN

  Vout: = "NO";

  ON THE OTHER

  Vout: = "OK";

  END IF;

  DBMS_OUTPUT. Put_line ('vout:' |) VOUT);

  END;

  Thank you

  Just compare the dates with dates:

  IF to_date(pdate,'dd/mm/yyyy')< sysdate="">

• Simple/hide logic does not not - pls help

  I created a form with two pages.

  Page 1 is initially visible where as page 2 is not.

  When you click a button in the page 1, page 2 must be visible and must hide the page1.

  the code written is

  Page2.presence = "visible";

  Page1.presence = 'hidden ';

  XFA. Layout.relayout ();

  When you run the code above, the first page is empty instead of total hidding.
  Any ideas?
  Nith

  Hi Nith,

  If you change the pagination for page 2 "follow previous", it works:

  

  Good luck

  Niall

• I just upgraded to logic 10.2.4 and now it does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. Any suggestions?

  I just upgraded to logic 10.2.4 (and 10.11.16) and El Capitan now logical does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. RELOADED drivers available and tried different USB ports. The audio works fine. Any suggestions?

  you need to ask Yamaha if they have a work-around or they intend to release the pilots, have a beta driver or what is their recommendation.

  If the logic is compatible with the operating system then the problem is with the 3rd party controller, and the developer will have to answer it. Past that if you have a backup time machine an instance where worked together your controller, the software and the operating system you can restore to that point

  Use Time Machine to back up or restore your Mac - Apple Support

• The logic of not recognizing my Fireface.

  Confusedly.

  Just bought new studio monitors.

  Replace the 'old' connected exactly the same thing.

  Now logical does not recognize my controller Fireface.

  Argh!

  Any ideas?

  Thank you!

  Hi, you have the latest driver for RME?

  Kind regards

  Scorpii

• event when the text does not fit in the field

  Hello

  When there is not enough room for the text in a field. Player will show a little "+". Is it possible to listen to this as an og event something similar?

  I have a field with room for 3 lines. If the user enters several. I need to supplement in anoter field.

  I sense that looking for the number of lines - I do a split for '\r' and get each row in a table. BUT the lines can be long, so just som enter 1 long line, my logic does not work. My policy is NOT monospaced, so I know how long a line!

  Let me hear if someone solved a case like this

  Thank you

  Thomas Groenbaek, Jyske Bank, Denmark

  If you check the box 'Time limit to the Visible area' on the ground, the complete event fires once the user fills out the field. You can put in a script like:

  xfa.host.setFocus (form1.subform1.overFlowTextField);

  in the complete event of the field with room for only 3 lines. Be aware though, that the focus change is not instantaneous and that a character or two could get lost, especially if the user is a fast typist. To make this work, you need to be "Limit length for area Visible" checked.

• Logic Pro does not recognize my audio interface

  Hi all

  I just bought the "Claret pre2 audio interface" (Thunderbolt) going to the thunderbolt port in my Mac pro. In system information, both devices show as connected. However in my audio preferences in 'pro Logic' his does not give me the option to select the audio interface, like its just do not appear at all. Someone has an idea of what might NOT be past - lack driver/s maybe? Thanks in advance

  Shane

  have you installed the driver and the control software, as shown below...

  https://global.Focusrite.com/downloads?product=Clarett+2Pre

  If you do not have - do, restart, make sure you see the interface in the audio and Midi of the Mac - if you do - then it will appear in the logic.

• Zoom r16 output does not reflect the master Pro Logic output

  I have a Zoom R16 hooked to Logic Pro X on El captain.

  Everything seems to work fine, but the release of the Zoom R16 always gives the sound, the monitor of the line, not the output of Logic Pro X inputs. If the helmet and out of line always give the full release of all entries and not the combination of Logic Pro. On the master output indicators seem to give the right indication (that is, not if all the sliders are declining), but that does not reflect the sound on the output.

  Is this a settings problem, a problem with Logic Pro or a problem with the Zoom R16.

  Anyone who suffers it, or has a sollution?

  How exactly this is connected to your Mac?  I guess that via USB?

  You have the latest drivers for it?

  Have you checked the Audio 'MIDI settings' application (Applications > utilities) to check that it is correctly configured in the operating system?

  Have you checked its configuration in LPX?  Two place to check.  1 - logic Pro X menu > control surfaces > Preferences 2 - Logic Pro X menu > control surfaces > Setup

• F55: SDI + 5.6 "logical TV works... HDMI + 5.6 "logic of the TV does not work

  F55 in OLED Sony HDMI, works very well. Connected to the same thing in a 5.6 "logical TV does not work. Yes, I've changed the source on the logic of HDMI TV. The same logic TV works well using SDI. I have 4 5.6 "logical TV and the issue is the same with all of them. Any ideas?

  23.98
  RGB
  S range
  1080

  It's funny you mention that, because I had the same problem with mine.

  I thought I was doing something wrong... Not that I use the HDMI to the camera, find it odd that it didn't work.

  Can connect the logic of tv on my hdmi from my computer, get a signal without problem, but out of my F55, same question you encounter.

  Ryan

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• Pci usb 3.0 of fresco logic card does not

  OK, so I was of the first usb 3.0 the fresco logic card. This card works perfectly under Linux so I know the card works. The card is labeled fl1000g and taken in a PCI standard and has a usb port.

  My computer is:

  HP elite 8200

  Windows 7 Professional 64 bit

  Processor: intel core i7 2600

  RAM: 12 concerts (upgrade to 32)

  Power color ATI Radeon HD 7750

  Windows driver attributes to him is "PCI standard PCI to PCI (filtered Matrox) bridge" I tried to download the drivers of Fresco Logic, looking for updates to windows, help options, remove the driver faulty and much more with no success. I tried many drivers, no matter what I do, windows keeps assign the same wrong driver. The fresco logic drivers keep saying that "there is no usb 3.0 found fresco logic controller. I believe that since this card once worked in windows but now does not work, the device id has been removed from the list of device or windows hardware? The hardware id is:

  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000 & REV_AA
  PCI\VEN_10B5 & DEV_8112 & SUBSYS_00000000
  PCI\VEN_10B5 & DEV_8112 & REV_AA
  PCI\VEN_10B5 & DEV_8112
  PCI\VEN_10B5 & DEV_8112 & CC_060400
  PCI\VEN_10B5 & DEV_8112 & CC_0604

  Thank you for your time.

  try to uninstall the device from Device Manager driver and reboot and see if it works

• FRAGMENTATION applied on several logical Tables does NOT WORK as expected

  Dear all,

  I have the below scenario implemented that does not work as expected.

  I have a logic Table LT1 (SUN) which is being implemented based on two physical Tables PT1 and PT2 (PT1 and PT2 are DIMS). LT1 has two of LTS, LTS1 and LTS2 implemented PT1 and PT2, respectively. Fragmentation is applied based on the ID of the system Source the PT1 and PT2 are loaded from different source systems. The granularity of the Tables physical is the same.

  Likewise, we have LT2 (DIM), which is implemented in two Tables of physics more and Fragmentation is applied in the Source systems function ID.

  We have an other TIMES DIM on which fragmentation is not applied.

  All of the above tables are linked to the fact (also physical and logical).

  I filter the data for TIME_DIM. Year = 2014 in all scenarios below.

  Scenario1: This solution works as expected when I shoot columns of LT1, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)

  Scenario2: This solution is also works very well when I shoot columns of LT2, SUN as well as the fact of TIME. (YEAR = 2014 is passed in the WHERE clause of queries UNION ALL 2, which is OK)

  Scenario 3: When I pull the LT1, LT2, SUN report, done TIME and filter the data for TIME_DIM. Year = 2014, the report does NOT WORK as expected. (Filter on YEAR = 2014 is not passed in UNION All queries in this scenario)

  When I build the model above (for scenario 3) report, it does not go as planned. Do not throw any error, it displays incorrect as results as physical demand generated by the BI server is not correct. Some of the filters is past the TIME SUN are not injected at the request of physics.

  Someone come in this scenario, no solution to the above is greatly appreciated. Thanks in advance

  Kind regards

  Madhav P.

  This is the bug in OBIEE 11 g of product. Oracle has provided the patch for the same and it is absolutely working fine now.

  Kind regards

  Madhav P.

• vmnet0 does not run after logic board replacement

  Hi all

  I just had the logic board replaced in my mac pro book.  Now, when I start my vm, it says:

  The bridge network on the device/dev / vmnet0 does not work

  The virtual machine will not be able to communicate with the host or

  other machines on your network.

  Virtual device Ethernet0 will start disconnected.

  Any suggestions on how to fix this?

  I'm trying to run a VM XP with Bridged networking.

  When I go to NAT, it works.

  Try to uninstall merge, restart your Mac and the Fusion facility. This will not affect your virtual machines.